bad vibe

[FLIPside]

what would be the best drive shafts to use in a 90 crx with a b16 swap, i do believe the ones i have at the present are the fault of the "shop" that purchased them. I read that 89 integra drive shafts might work. Another opinion would be welcome.

[jdm95civic]

89 or 90 teg should work...i had a 90 si w/b16 vtec swap and i use 90 teg axels..

[Vteckidd]

you must use the same axles as the halfshaft you have. IE if you have a DC2 halfshaft you need DC2 axles, if you have DA halfshaft you need DA axles.

You can use 90-93 integra axles. if purchasing from an auto parts store be sure to ask for the middle of the year, like a 92 integra. i say this beucase sometimes the auto parts store group end year models into the same year IE a 90 integra axles could be 89 integra axles which you dont want.

other than that, wheel bearings or a out of alignment car could be causing your problem