Log in

View Full Version : Who knows about Paintall guns?


EP3sAreFun
02-15-2006, 10:15 AM
ive got a Smart parts impulse and my circuit board broke so i took it apart... a year and a half ago... i put it all back together today and ive got a left over screw that looks kinda important....

lemme get a pic....
bijan gxe
02-15-2006, 10:18 AM
paintball guns have circuit boards?
LemonAJAX
02-15-2006, 10:22 AM
yeah the high tech ones.. but it's more than likely something important.. i would take it appart again.. then see if your missing one..
gtikid
02-15-2006, 10:24 AM
yes they have electronic triggers and shit now...but like the guy above said...just pull it apart and start putting it back together and try to find where the screw fits...
Hulud
02-15-2006, 10:29 AM
yea i have an impulse

show me a pic of the screw
EP3sAreFun
02-15-2006, 10:30 AM
sorry, was waiting on my phone to send the pic.

i have taken it back apart twice... i still cant figure it out. it looks like something that goes on the outside cause it looks to be adjsutable?

and yeah.,.. i just oredered a board to replace my old one... read this

The Blackheart circuit board is a full-featured tournament level, upgrade board. It gives you complete operational control and a wider range of adjustment for ION, Impulse, Shocker or Nerve markers.
Features:

Fire Rate (Adjustable)
Trigger Debounce (Adjustable)
Kick-In Rate for Advanced Modes (Adjustable)
Sustain Rate for Advanced Modes (Adjustable)
Shots Fired to Enter Advanced Mode (Adjustable)
First Shot Drop Software (Adjustable)
PSP Legal Mode (Adjustable)
NXL Legal Mode (Adjustable)
Millennium Legal Mode (Adjustable)
Three Shot Burst
Low Battery Indicator
More User-Friendly Software
Additional features:


New Speaker for Easier Adjustments and On/Off Activation
Non-Battery Draining Design
Nickel Plated Solenoid Components
New Higher Max Rate of Fire Software (20 shots/sec)


the factory replacement one was the same price... and thats lame. so i bought the super upgraded one
Hulud
02-15-2006, 10:35 AM
either hold the pistol grip or the one in the back udner the bolt?
Hulud
02-15-2006, 10:36 AM
or in front under the barrel and the regulator? not sure if thats what you call it
gtikid
02-15-2006, 10:38 AM
damn that board sounds nice as hell...i have friends with both shockers and impulses...super nice guns...i love the trigger on the shocker
Hulud
02-15-2006, 10:40 AM
o and how much is that board?
EP3sAreFun
02-15-2006, 10:41 AM
ooooooooooooooooooooooooooooooooh i figured it out!


I was looking at my girl's gun to make sure it was working right and on my girl's conncetor that goes from the hopper to the gun.. (whatever the fck its called)... its got 2 screws, one that tightens onto the neck and hold the hopper in place and one that attaches to the gun... this is one of those screws!

+rep for helping out!
Hulud
02-15-2006, 10:42 AM
ooooooooooooooooooooooooooooooooh i figured it out!


I was looking at my girl's gun to make sure it was working right and on my girl's conncetor that goes from the hopper to the gun.. (whatever the fck its called)... its got 2 screws, one that tightens onto the neck and hold the hopper in place and one that attaches to the gun... this is one of those screws!

+rep for helping out!
so wait.... i didnt think they made right feed impulses? or does your girl have a diff gun?
EP3sAreFun
02-15-2006, 10:42 AM
99.95 with free ground shipping... I mostly play with my girlfriend and i probably wouldnt of bought it unless mine was broke.

but it should help me kick her ass more :)
Hulud
02-15-2006, 10:43 AM
99.95 with free ground shipping... I mostly play with my girlfriend and i probably wouldnt of bought it unless mine was broke.

but it should help me kick her ass more :)
haha you ass lol
EP3sAreFun
02-15-2006, 10:45 AM
so wait.... i didnt think they made right feed impulses? or does your girl have a diff gun?
nah shes got a spyder TLR

... and whats right feed?

heres the spot for the screw
EP3sAreFun
02-15-2006, 10:47 AM
haha you ass lol
shit, my woman is viscious... shes shot me in the goggles and ass before... in the same damn game... she doesnt know what "HIT!!!" means
Hulud
02-15-2006, 10:49 AM
whats right feed? when the feed tube comes out at an angle to the right and you have to use an elbow to connect the hopper
check out the tippmann model 98, and youll see what i mean
most lower priced guns have it (or used to)
EP3sAreFun
02-15-2006, 10:51 AM
whats right feed? when the feed tube comes out at an angle to the right and you have to use an elbow to connect the hopper
check out the tippmann model 98, and youll see what i mean
most lower priced guns have it (or used to)
oooh. it does have vertical feed, but its still got a connector, you can see on bottom of pg1 of the post
Hulud
02-15-2006, 10:54 AM
oooh. it does have vertical feed, but its still got a connector, you can see on bottom of pg1 of the post
yea i see
i need to get a new hopper my lid wont stay shut
EP3sAreFun
02-15-2006, 11:11 AM
ive been getting all my stuff from whats now called.... Dick's sporting goods? the one at the mall of ga.
Hulud
02-15-2006, 11:13 AM
ive been getting all my stuff from whats now called.... Dick's sporting goods? the one at the mall of ga.
psh online is cheaper lol
or atleast a few years ago when i was big into paintball
EP3sAreFun
02-15-2006, 11:17 AM
psh online is cheaper lol
or atleast a few years ago when i was big into paintball
oh it still is... i dont mind paying a few extra bux to go down the street and buy it. I'm inpatient lo
Hulud
02-15-2006, 11:18 AM
oh it still is... i dont mind paying a few extra bux to go down the street and buy it. I'm inpatient lo
hahaha ok
gijoe0720
02-15-2006, 02:30 PM
yea i have an impulse



I am sorry
Rican219
02-15-2006, 02:31 PM
I am sorry

JES JU R NOW STFU!
gijoe0720
02-15-2006, 02:34 PM
JES JU R NOW STFU!

what?
Hulud
02-15-2006, 02:36 PM
what?
STFU!
cant u understand that?

or are you tooo straight edge for that?
gijoe0720
02-15-2006, 02:37 PM
your just mad cause you have an impulse
Rican219
02-15-2006, 02:38 PM
STFU!
cant u understand that?

or are you tooo straight edge for that?

:stupid: BEESH
Hulud
02-15-2006, 02:39 PM
your just mad cause you have an impulse
im not mad sucka
sorry to ruin your day
kooki
02-15-2006, 02:41 PM
yea i see
i need to get a new hopper my lid wont stay shut

duct tape it :D

thats what i do w/ my egg
gijoe0720
02-15-2006, 02:42 PM
Well I know I would be mad if I had an impulse. I did have one at one point and hated it so I sold it and bought me a cocker. Put over 1000 into it and then traded it for a matrix.
Hulud
02-15-2006, 02:45 PM
blah blah blah
im perfectly happy with my impulse
but you keep typing and all i read is that quote
EP3sAreFun
02-15-2006, 04:14 PM
Well I know I would be mad if I had an impulse. I did have one at one point and hated it so I sold it and bought me a cocker. Put over 1000 into it and then traded it for a matrix.
1000 dollars into it?....
4dmin
02-15-2006, 05:49 PM
look up wildbill piantball in lawrenceville, talk to rocky he is a good guy and works for good prices (certified smart parts tech)
Hulud
02-15-2006, 05:52 PM
1000 dollars into it?....
thats not hard at all with an autococker, i owned one at one point prolly dropped $700 in three months into it then sold it
JustinSane110™
02-15-2006, 06:06 PM
thats not hard at all with an autococker, i owned one at one point prolly dropped $700 in three months into it then sold it
I used to have one, when it finally showed up I was too excited to pay attention to what I was doing and put the bolt in upside down and was pissed off when I went to shoot and the paintball just fell outta the barrel cuz no airflow was gettin through. :lmfao: :lmfao:
Hulud
02-15-2006, 06:07 PM
I used to have one, when it finally showed up I was too excited to pay attention to what I was doing and put the bolt in upside down and was pissed off when I went to shoot and the paintball just fell outta the barrel cuz no airflow was gettin through. :lmfao: :lmfao:
wow lol
JustinSane110™
02-15-2006, 06:09 PM
wow lol
Thats what I said when I figured out what was goin on, hahaha. :lmfao: :lmfao:
Hulud
02-15-2006, 06:40 PM
Thats what I said when I figured out what was goin on, hahaha. :lmfao: :lmfao:
bwahahaha