PDA

View Full Version : Cleaning out garage- Civic and Nissan Sentra parts


Db Diablo
02-11-2006, 08:05 PM
D16Z6 engine, block number 3646846, needs crankshaft- SOLD
Ractive intake- SOLD
Stock 1992 Sentra SE-R springs- Free
Energy Suspension front control arm bushing set (p/n 7.3109G)- $20
Metalux rear brake pads for 1992 Sentra (p/n 24-511-04)- $5
Rear step bumper for Mazda B2200- Free
SDBCIVIC
02-12-2006, 01:12 AM
whats wrong with the engine? is it complete and will it run? pm me
Db Diablo
02-14-2006, 07:08 PM
Someone come get this stuff out of my garage. No resonable offers refused.
UpSideDownDesi
02-14-2006, 08:08 PM
the intake and bushings are they for sentra?
khoip88
02-14-2006, 08:54 PM
Pm sent....
Db Diablo
02-15-2006, 06:17 PM
the intake and bushings are they for sentra?

The intake is for a 1994 Civic EX but can possible be used on other models and the bushings are for a 1992 Sentra SE-R.
AlexHerb
02-25-2006, 07:09 AM
So whats the deal with the bottom end on that motor?
Db Diablo
02-26-2006, 12:18 PM
So whats the deal with the bottom end on that motor?

The only thing wrong with the motor is that the teeth at the end of the crankshaft are stripped. Didn't have the crankshaft bolt tight enough in the pulley after I changed the timing belt...lesson learned.
HalfBaked
02-26-2006, 12:19 PM
Do you have the se-r front sway bar? or bolts?

Also do you have the totaled car on hand? What color? I need a new trunk if you have one in good shape...
Db Diablo
02-26-2006, 12:24 PM
Do you have the se-r front sway bar? or bolts?

Also do you have the totaled car on hand? What color? I need a new trunk if you have one in good shape...

No, the only thing I have left of the car are the things I have listed here. Oh, except for the stock wheels. I had the '96 SE-R 5-spoke wheels on it when it was totaled.
HalfBaked
02-26-2006, 02:27 PM
Do you have any of the 96 wheels still?
Db Diablo
02-26-2006, 07:08 PM
Do you have any of the 96 wheels still?

Nope...just the '92
DurtySpeed
02-26-2006, 07:25 PM
Teeth? I am not familiar with the d series but I have a friend who needs a bottom end. I thought there was just keyway that held things on right. Like I said, I am not familiar with d-series though. But do you have a close up pic of the damage do the crank? He may be interested depending on how bad it is.
DurtySpeed
02-26-2006, 07:28 PM
Another question, did the pistons hit the valves? You make it sound like you had a timing belt failure.
BABY J
02-26-2006, 08:43 PM
Cash in hand... I will take the block for my 300HP D16 project. PM/Call me.

Baby J
Andy099
02-26-2006, 09:02 PM
how much for the valve cover?
Db Diablo
02-27-2006, 06:50 PM
Another question, did the pistons hit the valves? You make it sound like you had a timing belt failure.

No, I didn't have a broken or slipping timing belt. I had just gotten the car and did not know if it had been changed or not, so I changed it. The crankshaft bolt came loose and the pulley was spinning freely on the crankshaft. Actually, the key slot seems ok, the key itself and the pulley received the most damage. I'll try to take a picture either later tonight or tomorrow.
Db Diablo
02-27-2006, 06:53 PM
Cash in hand... I will take the block for my 300HP D16 project. PM/Call me.

Baby J

The first person to come get it out of my garage can have it! I need it to go ASAP so that I don't have to move it when we start painting later in the week.
DurtySpeed
02-27-2006, 07:12 PM
We want the engine dude. Cash in hand and willing to come get when my friend gets of work tomorrow. So it would be tomorrow evening/night. Let me know asap. Pming you now. WE WANT IT.
Db Diablo
02-27-2006, 08:21 PM
more pics
jdmjohn
02-27-2006, 10:37 PM
dibs on the intake. ygpm.