Log in

View Full Version : Power Mods guesstimate?


EP3sAreFun
02-06-2006, 10:29 PM
so the track is closed, and ive never gone before but whats something i should expect? i dont wanna get my hopes up... i'd like to think maybe a mid-low 14 after i get used to the track

Injen Cold Ait Intake
DC Sports Stainless Header
Skunk2 Catback Exhaust
Spoon Ground Wires
Neuspeed Short Shift kit
Nitrous Xpress EFI stage 1
Nitrous Xperss Bottle Heater
Nitrous Xpress Fuel Pressure Safety Switch
Nitrous Xpress Bottle Pressure Gauge
Nitrous Xperss Pressure Relief Fitting
Nitrous Xpress Iceman Purge Valve
Skunk2 coilovers
Energy Suspension Motor Mounts (going to be in by the time track opens)

i'll probably run with the 50 shot at the track which'll give me 213hp and 200tqe

i'm also running some Kumho 712s 205/40ZR16 on some 16" Rota GT3s

ive got a little wheel hop, but the ES motor mounts should take care of that and my car weighs around... 2800 with me in it

any guesses?
JDMBeau
02-07-2006, 12:25 AM
im guessing you have a b swap see how your making 213 with a 50 shot.

my buddie in his EG hatch ran like a 14.1 or something like that with a stock b16 swap with bolt ons. also that was with some nitto drag radials.

i would say for the first time youve been, you should be in the 14s with spray. just work on 60ft times,

steele is always open, some of us rome boys go up there a good bit, if you ever wanna go just holler.
Jdm94Coupe
02-07-2006, 02:40 AM
yea you missed the most important part....what fucking car do u drive, lol....
EP3sAreFun
02-07-2006, 08:26 AM
hahaah sorry, thought it'd be obvious... but now that i read my post... its not!

a 2002 Civic Si (EP3)

Wheres steele at?
IntegraXTR
02-07-2006, 11:33 AM
you should def hit 14s all day with that setup
Vteckidd
02-07-2006, 08:29 PM
with the 50 shot you should be in the 14s. Stock EP3s usually run in the high 15s.
EP3sAreFun
02-07-2006, 11:12 PM
what do yuy guys think it will take t break into 13s?
JDMBeau
02-08-2006, 03:32 PM
strip the interior, and like bump it up to a 75 or 80 shot of n2o.

thats about all i can think of until you break into the motor and do some internal work.
EP3sAreFun
02-08-2006, 07:10 PM
POO, i like my interior. and i'm not going tor isk hurting the motor with a 75 shot

i'm about to do test pipe, and energy suspension motor mounts, get that done before i go out to the track