racing seats,tools,subs and other stuff

[THEONE]

2 kicker 8inch freeair subs 50.00

3 fosgate 12's one is a dvc they all work but are olds school 50.00*****sold**

a set of R1 racing (black) racing seats in good condition 100.00***sold***

lincon weld pack mig welder with wire brush and 2 masks 150.00 ****sold***

skil jigsaw 20.00

milwalkee sawsall 40.00

husky 25 gallon air compressor with 3/8 air gun 1/2 impact ,grinder ,air chisel,2 paint guns husky brand and cut off tool. also has a adjustable pressure regulator 200.00 ******25 gallon*****woops***sold***

engine hoist and engine stand 125.00

matco torque wrench *NICE* very expensive and never used 125.00

dsm 1g (metal blow off valve and side mount intercooler) 15.00

here are some pics i will get more and add more later my camera died and i took quick pics.

make offer on anything you see i need this stuff gone!!! i might even make trades for turbo stuff. and im located in lawrenceville

[THEONE]

heres more hydro tank and compressor

[mccoy1178]

a set of R1 racing (black) racing seats in good condition
husky 35 gallon air compressor with 3/8 air gun 1/2 impact ,grinder ,air chisel,2 paint guns husky brand and cut off tool.

any seat rails and brackets on the seats? what r u asking for both items? lmk thanx
Mccoy

[THEONE]

a set of R1 racing (black) racing seats in good condition
husky 35 gallon air compressor with 3/8 air gun 1/2 impact ,grinder ,air chisel,2 paint guns husky brand and cut off tool.

any seat rails and brackets on the seats? what r u asking for both items? lmk thanx
Mccoy
no brackets and i added prices dont be afraid to make an offer...

[Bishop]

i may have some one interested in the welder. IS it setup ready for gas? Where are u located?

[THEONE]

i may have some one interested in the welder. IS it setup ready for gas? Where are u located?
im in lville all it needs for gas is the regulator and bottle they sell a gas kit for it at home depot. and to switch the polarity inside the welder where the wire feed is.i was going to use gas with it but i never weld aluminum so i never needed it. it will penetrate some pretty thick metal and weld up thin sheet metal and exaust with a little practice.

[Bishop]

yeah i have a similair one. I was talking to someone in my welding class and he has been looking for one but couldnt find anything for a good price. I think he will want this. I wont see him till tuesday though. I may wanna check out the seats too.

[THEONE]

yeah i have a similair one. I was talking to someone in my welding class and he has been looking for one but couldnt find anything for a good price. I think he will want this. I wont see him till tuesday though. I may wanna check out the seats too.

cool,just let me know when he wants it.

[SixSquared]

I got 80 for those seats. lmk somethin.

[BTLFED]

I wanna look at the seats too. My 510 needs some BAD.

[THEONE]

i will get better pics of both seats up tommorow.they are in good shape not show quality, but nice for the price...hey i made a ryme :)

[Sibious]

hey umm those seats, cna i just get a bracket off ebay hte weill fit in my car? thats if moon doesnt buy them and if i have the cash.

[paintballer4ya13]

engine hoist and engine stand 125.00

what brand? and do you have any pic of it?

-Josh

[D Dysinger Racing]

100 4 the welder...404-406-9061

[Sleepin Hatch]

a welder sounds about good right now

[JDMshiZnit69]

is the hydro system good for growing herbs....
you know

[THEONE]

is the hydro system good for growing herbs....
you know
yes sir and only the finest ;)

[speedminded]

You have a part number on that torque wrench? What range is it?

[THEONE]

You have a part number on that torque wrench? What range is it?
im gonna have to go look at it again i think it will 300lbs of torque maybe more its like 2 1/2ft long.oh and it had reular torque adjustments and newton adjustments.

[punkr6]

intrested in the welder...location?????

[Blitanicle99]

If the mig welder is still available is it single phase or 3 phase?

[THEONE]

If the mig welder is still available is it single phase or 3 phase?
what do you mean single phase?

[speedminded]

what do you mean single phase?The power it uses, being the size the welder is i'm 99.9% positive it is single phase. Three phase is higher power, that is what is at the pole then it is converted to single phase (that the job of the big transformer on the pole) Three phase will bypass that transformer.

[THEONE]

The power it uses, being the size the welder is i'm 99.9% positive it is single phase. Three phase is higher power, that is what is at the pole then it is converted to single phase (that the job of the big transformer on the pole) Three phase will bypass that transformer.
ahh.thanks its the one you can use safely on a regular outlet in your house.

[IntegraXTR]

interested in the seats! pm sent, they don't include brackets? where can I get them from?

[Spyder]

would you seperate the stand and hoist?

how much does the gas kit for the welder cost? what condition is the welder in?

pictures of the sawsall?

thats all for now..

[Blitanicle99]

I want the welder also. If its single phase. Give me a call. 678 575 4492. Im travis. Ill pay cash today.

[THEONE]

took more pictures i never noticed 2 tears in the passenger seat on the side that the center console would cover i have no clue where it came from and there are scratch like marks on the back also notbad but still a good price and the driver seat is almost perfect its missing the plastic part that covers the adjustment lever i had that seat in my hatch and you really couldnt tell and they are quite comfortable.and those are the air tools that come with the compressor aswell as the 3 paint guns.

[THEONE]

a back shot of the seat and the side toward the center console you can pinch the tear together and sew it pretty easily not as bad as it looks and unseen installed in a civic or prelude

[THEONE]

and the driver seat its in nice shape but the picture is dark for some reason.

[BlackDubs]

bump for a good seller.

[THEONE]

bump for a good seller.
hey man,you still got that axle?if so i can return it for you.

[Spyder]

PM sent.

[SixSquared]

I sent you a pm about those seats and you haven't gotten back to me.... lmk something dude!

[THEONE]

I sent you a pm about those seats and you haven't gotten back to me.... lmk something dude!
pm sent..sorry about that.

[paintballer4ya13]

PM Sent.

-Josh

[BLAZER PIMPIN]

bodydropped how much for the compressor and all air tools? gimme your best cash price!!!

[THEONE]

bodydropped how much for the compressor and all air tools? gimme your best cash price!!!
200.00:) - the ingersol and rand 3/8 impact.but includes the paint guns

[BLAZER PIMPIN]

what?

[THEONE]

what?
200.00 for compressor and airtools and paint guns
oh and 1 25ft. and 1 50ft air hose.

[BTLFED]

PMed you back.

[vtecgsrguy]

dude pm me!!!!!

[THEONE]

dude pm me!!!!!
? did you send me 1?

[tank500999]

check pm i want the welder asap have money in hand call me at 678 429 0284

[b19wheels]

hey gimme a call about the engine stand and dsm stuff!! 404-641-4183 Stephen, im riding around right now!

[THEONE]

for those whos asked i will seperate the hoist and stand just remind me who you were again:)

[THEONE]

so where did all the people interested in the tools go??

[SixSquared]

I still want the seats, if that's any consolation. :D

[THEONE]

I still want the seats, if that's any consolation. :D
someone is suppose to be on the way ,if he doesnt want them i will let you know.

[BTLFED]

someone is suppose to be on the way ,if he doesnt want them i will let you know.

SOLD! Sorry Emily.

Sent you a PM about the compressor and stuff, Bodydropped. ;)

[THEONE]

compressor is sold.still have a good engine hoist and torque wrench.

[SixSquared]

SOLD! Sorry Emily.

Sent you a PM about the compressor and stuff, Bodydropped. ;)

DIE! I was gonna recover them in black leather and make them sessy!

[BTLFED]

DIE! I was gonna recover them in black leather and make them sessy!

Die?! :( My 510 needed seats bad! :cry: :(

[Goinfasterthanu]

Call my number in my sig ill get the stand and hoist..! Got cash in hand!

[THEONE]

Call my number in my sig ill get the stand and hoist..! Got cash in hand!
i will call tommorow but the stand is gonna be picked up tommorow if he dosent come to get it you can have both for 125.00,if he does you can have the hoist for 100.00.oh and the hoist also has the chain for lifting engines.

[Goinfasterthanu]

sounds good... about what time ? Where are you located?

[THEONE]

sounds good... about what time ? Where are you located?
he said he will be picking up the stand before 1:00 so if you want to wait til after and try and get both or just go for the hoist you can come earlier just let me know.you saw the picture its a good hoist but it is used so it has a little grease and paint on it but it still works great.

[Goinfasterthanu]

dont care what it looks like just function..Ill just come get the hoist..Just call me when your ready..

[THEONE]

dont care what it looks like just function..Ill just come get the hoist..Just call me when your ready..
will do.

[THEONE]

up

[hoffman777]

Hey How many watts do those kickers hold?

[THEONE]

Hey How many watts do those kickers hold?
they are 8ohms and the wattage is 200 i think.

[THEONE]

still got the hoist and the torque wrench.

[BTLFED]

Bump for a good seller! :goodjob:

[Goinfasterthanu]

Sorry i cant get to hoist...damn kid who was gonna sell me his truck screwed me over so now i am truckless! If i find one {that isnt messedup, damn car lots} soon ill come get it...Again sorry its not like me to back out of something..To top it all off i still have this damn motor sitting here....