Can someone say Big Block?

[buddha@TeamFX]

Check it out 496 stroker just getting good and done...

[NOTSOJDM]

true dat

[5thgcelica]

now thants an engine

[#1Beaver]

i DONT KNOW WTF im looking at, but damn thats nice!
what kinda HP can that push out stock!

[imbosile]

i DONT KNOW WTF im looking at, but damn thats nice!
what kinda HP can that push out stock!

:werd:

[#1Beaver]

ooooooooooook so wtf is werd about it what im use to is B16 B17 B18 B20
thats what i know neva worked on a car with a carberater in it, put it that way!no fords no chevys no dodges,and i know not all have carberaters b4 sum1 says!

so tell me how am i suppose to know wtf that comes out of, can get into, or like my simple fuckin question what kind of hp can it push out!

[LS2ner]

looks like ya got the serpentine pulley set on it. What carb. ya using?

[buddha@TeamFX]

Yea it has all billet serpentine along with the billet brackets and billet power steering unit...We had vintage a/c on it..but the motor was just a little to much cam for all that...We are running a 1050cfm Barry Grant Dominator on it...feeds plenty of fuel...About the power stock...I'm not sure...its far from stock...its a 454 4bolt main block with a 502 crank...which makes 496stroker...has 11:1 comp. with forged pistons, polished rods, has a set of Canfield aluminum heads, Edelbrock Performer Rpm intake...The cam is solid lift roller with about 312duration and .640 lift...Don't quote me on all the specs...Its my uncles motor in his 70 nova he is finishing and I can't remember all the specs exactly...but should be in the neighborhood of high 600 in hp and about 800ft. lbs. of torque..but we'll have to wait for the dyno results to prove any of that.

[#1Beaver]

Yea it has all billet serpentine along with the billet brackets and billet power steering unit...We had vintage a/c on it..but the motor was just a little to much cam for all that...We are running a 1050cfm Barry Grant Dominator on it...feeds plenty of fuel...About the power stock...I'm not sure...its far from stock...its a 454 4bolt main block with a 502 crank...which makes 496stroker...has 11:1 comp. with forged pistons, polished rods, has a set of Canfield aluminum heads, Edelbrock Performer Rpm intake...The cam is solid lift roller with about 312duration and .640 lift...Don't quote me on all the specs...Its my uncles motor in his 70 nova he is finishing and I can't remember all the specs exactly...but should be in the neighborhood of high 600 in hp and about 800ft. lbs. of torque..but we'll have to wait for the dyno results to prove any of that.
damn thats nice, :goodjob:
thats the answer to my question

[LS2ner]

Yea i thought that was an edlebrock mani. Shits looking awesome man, cant wait to see some numbers.

[1/4Mile]

Nice. Good Ole big block power. What kind of power does she have