Humphrizzle
01-03-2006, 01:19 PM
im building my accord back from the bottom..
from this...
http://usera.imagecave.com/97accordjdm/mycarrrrrrSmall.jpg
now to this...
http://usera.imagecave.com/97accordjdm/PIC00017Small.JPG
i got in a wreck on 10-28-2005 and spun sideways into a couple road signs on Hwy. 34.
basically i need to just straighten out the rear quarter panel, get my rear passenger door replaced, fix the brakes, and i have already done most of the suspension work.
as you can see the rear passenger side wheel is bent in.. from the collision the road sign slammed into it and bent the trailing arm and the lower control arms.
LUCKILY, i had a spare 1992 accord sitting right next to it for me to enjoy!
http://usera.imagecave.com/97accordjdm/PIC00035Small.JPG
the suspension fit right on with no problems
alright i did some looking around and i saw the trunk was a little "crinkled" up inside.. (i did hit the sign goin 45 sittin sideways)
from inside
http://usera.imagecave.com/97accordjdm/PIC00023Small.JPG
from outside
http://usera.imagecave.com/97accordjdm/PIC00022Small.JPG
then later on i saw inside the rear passenger door jambs there was some "crinkling"
http://usera.imagecave.com/97accordjdm/PIC00013Small.JPG
http://usera.imagecave.com/97accordjdm/PIC00016Small.JPG
i have shaved my rear emblems and there was some white paint in the back so while im doing nothing, might as well do something.. sooo
before....
http://usera.imagecave.com/97accordjdm/PIC00010Small.JPG
after....
http://usera.imagecave.com/97accordjdm/PIC00016Small2.JPG
i think it looks a lot better.
i did some more things to the interior while i was bored too.. like a new shift boot (old one was torn) and a new si shift knob from my brother (old one broke because i tightened it too tight)
i will be getting GSR cloth seats from my brother's 94 GSR when he gets new Recaro Brides.. but im not too worried about it.
well thats all i want to write right now i'll post back later.
from this...
http://usera.imagecave.com/97accordjdm/mycarrrrrrSmall.jpg
now to this...
http://usera.imagecave.com/97accordjdm/PIC00017Small.JPG
i got in a wreck on 10-28-2005 and spun sideways into a couple road signs on Hwy. 34.
basically i need to just straighten out the rear quarter panel, get my rear passenger door replaced, fix the brakes, and i have already done most of the suspension work.
as you can see the rear passenger side wheel is bent in.. from the collision the road sign slammed into it and bent the trailing arm and the lower control arms.
LUCKILY, i had a spare 1992 accord sitting right next to it for me to enjoy!
http://usera.imagecave.com/97accordjdm/PIC00035Small.JPG
the suspension fit right on with no problems
alright i did some looking around and i saw the trunk was a little "crinkled" up inside.. (i did hit the sign goin 45 sittin sideways)
from inside
http://usera.imagecave.com/97accordjdm/PIC00023Small.JPG
from outside
http://usera.imagecave.com/97accordjdm/PIC00022Small.JPG
then later on i saw inside the rear passenger door jambs there was some "crinkling"
http://usera.imagecave.com/97accordjdm/PIC00013Small.JPG
http://usera.imagecave.com/97accordjdm/PIC00016Small.JPG
i have shaved my rear emblems and there was some white paint in the back so while im doing nothing, might as well do something.. sooo
before....
http://usera.imagecave.com/97accordjdm/PIC00010Small.JPG
after....
http://usera.imagecave.com/97accordjdm/PIC00016Small2.JPG
i think it looks a lot better.
i did some more things to the interior while i was bored too.. like a new shift boot (old one was torn) and a new si shift knob from my brother (old one broke because i tightened it too tight)
i will be getting GSR cloth seats from my brother's 94 GSR when he gets new Recaro Brides.. but im not too worried about it.
well thats all i want to write right now i'll post back later.