H22 or h23 crank which is stronger ?

[H23ACCORD-T]

im looking into building and im not sure if i should get the h22 crank or not

[1/4Mile]

im looking into building and im not sure if i should get the h22 crank or not
Correct me if i'm wrongbut using a H22 would be de-stroking you engine slightly. Right now you actually have more tq(3 ft0lbs) that a H22 and with boost you would have more tq with the larger displacement. I'm would stay with H23

[anothaRRR]

destroke=rev higher....

[Vteckidd]

as far as STRENGTH of the crank, i would say they are equal. i have never seen a OEM honda crank BREAK or CRACK. OEM cranks make 800+WHP without fail. its the rods that usually fail in the H23 motor.

If you are looking to build , i would not try to mix and match cranks. use the crank your block was designed to use. IMO

[93H22ACX]

spin both to 9500+rpm ;) only if you do it right. bearing failure are the most common with h23vtec hybrids.

[Vteckidd]

spin both to 9500+rpm ;) only if you do it right. bearing failure are the most common with h23vtec hybrids.
yeah i was gonna say, rod and beargin failure is prob the weak length in the H23 rods, just like the LS rods

[H23ACCORD-T]

are there any upgraded bearings or oem will make it

[anothaRRR]

ACL makes race bearings I think...

[93H22ACX]

yes they do fonzo