View Full Version : 98 Acura CL swap Question
BOOSTED96EK
12-28-2005, 07:55 PM
i have a 98 cl that im trying to put a 95 h22 swap into. i need to know is there a particular wiring harness or wiring that has to be done. i have a obd2 to obd1 jumper harness to run the stock 95 ecu. any info would be great thanx.
1/4Mile
12-28-2005, 11:00 PM
i have a 98 cl that im trying to put a 95 h22 swap into. i need to know is there a particular wiring harness or wiring that has to be done. i have a obd2 to obd1 jumper harness to run the stock 95 ecu. any info would be great thanx.
Make sure that Jumper harness is a Obd2a to obd1 harness not a obd2b for a 99 and up. I think the swap should be pretty straight for'wd especially if you cl came with the F or H 2.2. or 2.3 same as an Accord.
BOOSTED96EK
12-29-2005, 09:21 PM
well i really need to know what harness to use and the h22 has a 8wire dizzy where the cl only has 4wires
BufordŽ
12-30-2005, 02:31 AM
well i really need to know what harness to use and the h22 has a 8wire dizzy where the cl only has 4wires
A really good site to find out EVERYTHING you need for this would be www.acua-cl.com (http://www.acua-cl.com) I'm on there daily.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.