PDA

View Full Version : 18" JDM Altstad 3 Peice Wheels w/Toyo Proxes4



Y3llowS14
12-21-2005, 12:40 AM
http://host.atomicfire.net/files/35/car2.bmpHey guys, I selling a set of JDM Altstad 3 peice wheels. They are 18x7.5 with 36 offsets with 5x114.5 lug pattern. They fit on my S14 just fine, but Im going widebodied and no longer need these.

They come with 225/40/18 Toyo Proxes4 tires all around that are in good shape (around 60% or more). One of the front is a replacement nitto from a blowout.

The wheels are in good shape, but one wheel has a little bit of curb rash and minor dent from daily driving---very little. Can easily be fixed for around $60 at wheel wizard. The face is almost perfect. These are very rare wheels that was a little over 2.8k when new. Im asking $1250 for them with tires. If you have any questions, feel free to pm or email me at [email protected] (http://by108fd.bay108.hotmail.msn.com/cgi-bin/compose?curmbox=00000000-0000-0000-0000-000000000001&a=8004ff576ddc08ebba5bbfe7428d1c5c85fbd5df75691580 aaacbadce5076d08&mailto=1&[email protected]&msg=78C7CC0F-0302-439D-9B34-6B882F66A550&start=0&len=1663&src=&type=x) Thanks NEW PRICE---$890

Y3llowS14
12-21-2005, 05:40 PM
Make me a reasonable offer on these guys. I need some money, quick. Thanks

YokotaS13
12-21-2005, 05:52 PM
what makes them JDM? I didnt even call my volks jdm.

Y3llowS14
12-21-2005, 06:36 PM
They were imported from Japan. They werent produced in the U.S. What makes other parts JDM? So should I say USDM wheels? wtf?

imbosile
12-21-2005, 06:37 PM
They were imported from Japan. They werent produced in the U.S. What makes other parts JDM? So should I say USDM wheels? wtf?

lol

Y3llowS14
12-22-2005, 06:59 PM
Bump

Y3llowS14
12-24-2005, 03:34 PM
To the top again before I head out.

Atmosphere
12-24-2005, 08:07 PM
sharp wheels

Y3llowS14
12-28-2005, 09:25 AM
Thanks man

Y3llowS14
12-28-2005, 04:19 PM
NEW PRICE---$890

Y3llowS14
12-30-2005, 12:52 AM
Bump it up.

Y3llowS14
01-13-2006, 09:13 PM
new price with tires....$890

Y3llowS14
01-17-2006, 10:52 PM
bump it up