View Full Version : OZ superleggera 17x8rims/tires 5x114.3, maxima parts
OZ superleggera 17x8 wheels with BF Goodrich Traction T/A tires 235 45 17 with only 5k miles on them $900
warpspeed rear section 2.5 mandrel bent for 97 99 maxima section between resonator and muffler $50
FSTB for 2000-2003 maxima. has clearance issues with 02-03 but fits. 00-01 works like a charm $20 used for 2 days
jvillagran2000
12-18-2005, 11:08 AM
What's the offset?
turbosx©
12-20-2005, 09:22 AM
is that exhuadt loud?and what is wrong wit it
it's the rear piece of the exhaust, i don't have a car that it works with even anymore
turbosx©
12-24-2005, 03:34 PM
were are you located at? and any heavy rust?any pics?
if you mean the pipe no rust it was cut between the resonator and the muffler it will not line up with OEM muffler you will need to put in a new pipe or use an aftermarket muffler, it's a 2.5 mandrel bent pipe
bump for the morning crew
Sammich
12-30-2005, 09:53 AM
do you have the stock six spoke maxima rims (17s) by chance. if so how much would you sell them for??
do you have the stock six spoke maxima rims (17s) by chance. if so how much would you sell them for??
nope when i sold my old car i stuck the 2002 wheels on it (97 maxima) but i can cut you a good deal on the OZ's if you're interested. I curbed one and had to get a new tire so i can't sell them for as much. Repair is around $50 (the lip is bent a bit at the edge)
Was selling for $900 for rims and tires i'll do $700 cash
Sammich
12-30-2005, 01:40 PM
ill think about it i already have 18s on my truck i was just interested in those 6 spoke maxima wheels so i can take off the 18s for a while and do a lower drop on it. but ill definitely let you know if im interested. what is the finish??
it's the silver finish not the gunmetal
turbosx©
01-04-2006, 07:01 PM
oh yeah does that exhaust have both 90degree bends and the one that goes over the rear beam
the exhaust goes over the rear beam from after the resonator but will not be direct bolt on to factory resonator or muffler, it came off a warpspeed 2.5inch kit
you will need a bit of new piping and new muffler
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.