Blake8418
01-22-2014, 06:30 PM
1995 Acura integra
My car will be going up for sale within the next few weeks. If you know anyone interested, please share.
1995 Acura Integra
-Engine-
81.5mm Golden Eagle SLEEVED block
Eagle rods
9.5:1 CP pistons
B16 head, ported and polished
Port matched ITR Intake and Throttle Body
00-01 ITR cams
Omni valvetrain
RC 750cc Injectors
AEM Fuel Pressure Regulator
Walbro 255lph In-Tank Fuel Pump
-Turbo setup-
Precision SC34 turbo
Neukin Ramhorn exhaust Manifold
Neukin 3" Downpipe and exhaust with a Magnaflow resonator and Borla muffler
Tial 38mm wastegate
Greddy BOV
-Transmission-
GSR Trans
ITR LSD
-Miscellaneous-
PPG Global paint inside and out[Color-GM Sunset Orange Metallic]
Sparco Suede steering wheel
Konig Britelite Wheels, 15" Front, 16" Rear
225 BFG Drag Radials on front
BFG G-Force Radials on Rear
Will also include 13" Exospeed Drag Wheels with M/T 25x8.5x13 Slicks
The entire engine/Turbo setup has less than 10,000 miles on it. The sleeved Block/pistons/Rings only have about 5,000 miles.
It made 444whp and 325ft lbs on a Dynojet @ 20psi
Has run a best of 10.85 @ 133mph in the 1/4
and 7.01 @ 106mph in the 1/8
I have an S&W 10 point roll cage kit that i can include to anyone interested.
Integra - YouTube (http://www.youtube.com/watch?v=hmDmyE0lMxo)
-PRICE-
I'm asking for $10,000.
It has twice that amount in it as it sits.
If you have any questions, feel free to ask.
Thanks
My car will be going up for sale within the next few weeks. If you know anyone interested, please share.
1995 Acura Integra
-Engine-
81.5mm Golden Eagle SLEEVED block
Eagle rods
9.5:1 CP pistons
B16 head, ported and polished
Port matched ITR Intake and Throttle Body
00-01 ITR cams
Omni valvetrain
RC 750cc Injectors
AEM Fuel Pressure Regulator
Walbro 255lph In-Tank Fuel Pump
-Turbo setup-
Precision SC34 turbo
Neukin Ramhorn exhaust Manifold
Neukin 3" Downpipe and exhaust with a Magnaflow resonator and Borla muffler
Tial 38mm wastegate
Greddy BOV
-Transmission-
GSR Trans
ITR LSD
-Miscellaneous-
PPG Global paint inside and out[Color-GM Sunset Orange Metallic]
Sparco Suede steering wheel
Konig Britelite Wheels, 15" Front, 16" Rear
225 BFG Drag Radials on front
BFG G-Force Radials on Rear
Will also include 13" Exospeed Drag Wheels with M/T 25x8.5x13 Slicks
The entire engine/Turbo setup has less than 10,000 miles on it. The sleeved Block/pistons/Rings only have about 5,000 miles.
It made 444whp and 325ft lbs on a Dynojet @ 20psi
Has run a best of 10.85 @ 133mph in the 1/4
and 7.01 @ 106mph in the 1/8
I have an S&W 10 point roll cage kit that i can include to anyone interested.
Integra - YouTube (http://www.youtube.com/watch?v=hmDmyE0lMxo)
-PRICE-
I'm asking for $10,000.
It has twice that amount in it as it sits.
If you have any questions, feel free to ask.
Thanks