Matt300ZXT
06-04-2013, 04:36 PM
I pulled these off of my car just now and am going to swap to a different radiator, and to silicone hoses.
The radiator is an AMS "3 core" that's actually a 2 core...thanks Canada. Anyways, it's in good shape, has a few bent fins but only has about 8k on it. It comes with the upper brackets to hold it in place, as well as the upper and lower silicone hoses. It fit just fine in my car and went in fairly easily. The lower legs fit perfectly into the core support and the upper 2 bolt holes for the shroud lined up perfectly. I don't remember trying to install lower ones, or if my shroud even still had lower holes for bolts but the shroud wasn't flopping around or anything. Anyways, it's $299 plus shipping on their site, I'll take $150 plus shipping.
Second are the Z1 hard pipes with t-bolt clamps and red silicone couplers. The couplers could use a shot of degreaser but otherwise they're ready to bolt on or whatever you want to do with them. They're $250 on Z1's site with the clamps, so I'll take $150 plus shipping.
http://i50.photobucket.com/albums/f311/Matt300ZXT/300ZX/ResizedImage_1370200372135_zps65fd036c.jpg
http://i50.photobucket.com/albums/f311/Matt300ZXT/300ZX/ResizedImage_1370200385941_zps26990a80.jpg
The radiator is an AMS "3 core" that's actually a 2 core...thanks Canada. Anyways, it's in good shape, has a few bent fins but only has about 8k on it. It comes with the upper brackets to hold it in place, as well as the upper and lower silicone hoses. It fit just fine in my car and went in fairly easily. The lower legs fit perfectly into the core support and the upper 2 bolt holes for the shroud lined up perfectly. I don't remember trying to install lower ones, or if my shroud even still had lower holes for bolts but the shroud wasn't flopping around or anything. Anyways, it's $299 plus shipping on their site, I'll take $150 plus shipping.
Second are the Z1 hard pipes with t-bolt clamps and red silicone couplers. The couplers could use a shot of degreaser but otherwise they're ready to bolt on or whatever you want to do with them. They're $250 on Z1's site with the clamps, so I'll take $150 plus shipping.
http://i50.photobucket.com/albums/f311/Matt300ZXT/300ZX/ResizedImage_1370200372135_zps65fd036c.jpg
http://i50.photobucket.com/albums/f311/Matt300ZXT/300ZX/ResizedImage_1370200385941_zps26990a80.jpg