View Full Version : SR20DET Powered RX7 TurboII 7000obo
lucaperk23
05-13-2013, 11:37 AM
I have a 1989 Mazda RX7 Turbo II with a SR20DET swap in it. The engine is super strong with great power no problems at all no smoke no oil leaks no fluid of any kind leaking. Here is a list of all the things done to it and mods. Feel free to text me and make me an offer will be willing to trade if you have what I am looking for. 859-533-9080. Brand new VIS carbon fiber hood, Stock turbo, Stock ECU, APEXI NEO AFC (Tuned at Mainstream Motorsports, making 210whp and 200tq on stock 7.5 PSI), Stock fuel, 3" exhaust with test pipe and highflow cat (built by TopSpeed), 4" midmount FMIC, Mishimoto radiator with dual shrouded fans, Electronic fan controller, HKS pod filter, CS catch can, Steel braided fuel lines, Steel braided power steering lines with AN fittings and custom reservoir, Optima redtop relocated to rear bin, Supernow Outer Tie Rods, Secret Element Inner Tie Rods (lots of angle), DTSS Bushings (Not installed, will be included), 50-50 weight distribution without corner weighting, Car weighs 2777 pounds, All cluster gauges and the aftermarket boost gauge work like OEM (tach, speedo, fuel, temp, etc)., Wiring is professional and NOTHING is hardwired., Cold start signal works, Rev limiter works, Emergency fuel cut works, It runs and acts like a stock SR in a stock FC., Some interior pieces are brand new (from me restoring the vehicle)
Issues (Most are pretty typical of FC RX7's)
- Wipers only work on the medium setting
- Rear wiper doesnt work
- Some of the plastics in the dash (vents, trim, etc) are cracked/missing
- Driver window sticks a bit and needs to be lubed
- Sunroof sticks a bit but gets going with a nudge
Also, no AC and no heat. Heater lines are looped but the blower motor still works for defrost
Minor stuff for the most part. TOMEI Rocker Arm Stoppers and many more pieces and parts that I cannot remember at the moment. If you have any questions feel free to call or text with price or maybe I may be willing to trade just let me know what you have thanks. 859-533-9080 I also have an exedy stage 1 clutch with it it does not need it but I just have plenty of parts to fall back on if one should go. Asking 7000obo
Matt300ZXT
05-13-2013, 12:33 PM
Ok he has 2 whole posts, for the same ad in 2 different forum sections. No pictures either...I vote this ad gets locked.
lucaperk23
05-13-2013, 01:47 PM
Hey dick I cant figure how to get the pictures to load on here. Text me I have pictures. And it is in two different categories because I have a Nissan Powered Mazda. I vote you get a life and quit knocking people. Thanks Luke.
lucaperk23
05-13-2013, 01:49 PM
And I just heard about this site. I have been on it a total of 4 hours tops. Sorry I cant be a "Certified Gearhead".
Somewhiteguy
05-13-2013, 02:03 PM
Well that's badass...lol. great looking swap! Glws!
lucaperk23
05-13-2013, 02:18 PM
Thanks brother. Sorry about The earlier posts without pics I didn't know there were post police here on this free forum. But thanks man. Alot of time and money into the swap. And tears if I do sell it. But I am moving to a different Army base and dont have a way to transport it. And do not wanna drive it all the way there man.
Matt300ZXT
05-13-2013, 02:43 PM
Can't figure out how to post pics? Have you ever used the internet? 95% of ALL internet forums use the same basic code to post pics. And I'm not "the post police", just get tired of people who have no clue.
lucaperk23
05-13-2013, 02:55 PM
Oh that is great and sorry I haven't the time to do everything according to your monarchy rule Mr. Matt. How about you quit being a douche and get out of my post if you have nothing nice or remotely interesting to say you can get off of here. At least out of my post. Now I have a "clue" So you may leave this area please and thank you. And how about you get a life and stop surfing posts just to harass people on theirs. Thanks again for absolutely nothing.
Sinfix_15
05-13-2013, 03:20 PM
Thank you for curing the engine cancer in another poor mazda who was suffering from the rotary disease. Looks like a fun car. Hope someone grabs it up.
lucaperk23
05-13-2013, 03:27 PM
Haha thanks man. Nice way to put it. Its an absolute blast!
1civic
05-13-2013, 03:45 PM
looks fun! GL
lucaperk23
05-13-2013, 06:13 PM
yeah it is
garf117
05-17-2013, 12:12 PM
not to hate or anything but i dont see where your getting a 7k price, the engine is worth about 1k, the car about 1.5, and the swapping itself would be about 2k, that 4.5. not saying your way overpriced but 7k is a bit auspicious to me.
Matt300ZXT
05-17-2013, 12:23 PM
I dunno about that, I think that's a fair price to ask with maybe some wiggle room added in if it runs great.
Sinfix_15
05-17-2013, 01:31 PM
not to hate or anything but i dont see where your getting a 7k price, the engine is worth about 1k, the car about 1.5, and the swapping itself would be about 2k, that 4.5. not saying your way overpriced but 7k is a bit auspicious to me.
Show me an SR20 swap anywhere on the planet for $1000...... GTFO out of here with that dumb shit.
E36slide
05-17-2013, 02:13 PM
Show me an SR20 swap anywhere on the planet for $1000...... GTFO out of here with that dumb shit.
Not talking shit, but my friend lucked up and got a built sr long block with zero miles for 900 lmao I was so mad when he told me that shit.
But yes sr's usually run 2400/2800 from places like nads auto not 1k. Lol
Sent from my myTouch_4G_Slide using Tapatalk 2
Sinfix_15
05-17-2013, 05:34 PM
Not talking shit, but my friend lucked up and got a built sr long block with zero miles for 900 lmao I was so mad when he told me that shit.
But yes sr's usually run 2400/2800 from places like nads auto not 1k. Lol
Sent from my myTouch_4G_Slide using Tapatalk 2
long block =/= engine swap
E36slide
05-17-2013, 06:10 PM
long block =/= engine swap
Still a damn good deal. He got a fully built bc head with 272, decked and polished, wisco pistons over bored only thing stock was the rods. The motor had just gotten back from the machine shop lol apexi hg, arp studs ect. Hes one lucky bastard lol
Sent from my myTouch_4G_Slide using Tapatalk 2
whatever210
05-17-2013, 11:33 PM
Drifted this car when mike had it. It's a pretty sweet setup.
JaBlah
05-17-2013, 11:58 PM
My friend just bought a sr20 swap with turbo motor tranny harness etc rear wheel setup for 1500...I will find out where tomorrow.Think somewhere on north side
If it was still Rotary powered, the last few owners wouldnt want to sell it, the piston bored them to death! haha. Always a fan of this car, seems to have had a few homes the last few years.
http://i44.tinypic.com/20ft47d.jpg
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.