OhMyGodfather
02-18-2013, 09:51 PM
BT Fabrications drop knuckles. Intense angle and better front suspension geometry. - SOLD
Cast welding was done by TopSpeed. Its legit. Ran them for 2 seasons. Same design as me, Chris Ward, and Whatever210 ran for all these years.
http://i.imgur.com/hr430G5.jpg?2
ISIS 4" Dual Straight Pipe Exhaust w/ test pipe. - SOLD
Good condition, no holes. Needs some scrubbing. Free test pipe with purchase.
http://i.imgur.com/4RHCNby.jpg?1
http://i.imgur.com/QEqnFha.jpg?1
Momo Start 2007 (Production 10/2010) FIA Certified racing bucket seat. - $300
Larger than most, but not big. Used for one event, but doesnt fit with my big head and my oversized roll cage. Has a 3 inch tear on the top seam from installing.
http://i.imgur.com/orv7UWp.jpg?2
http://i.imgur.com/8hSitx5.jpg?2
Turbo Dave fabricated side mount S13 seat bracket. Fits with the Momo but can be used for others. - $75
http://i.imgur.com/GNOZz4U.jpg?2
Koyo Aluminum Radiator, KA24DE/RB20/LSX - SOLD
Previous idiot spray painted it. No leaks. Ran it on my KA, SR, and probably my LS if it doesnt sell. I think I have a radiator coming in so I don't need it. I can't remember.
http://i.imgur.com/kHWsGZK.jpg?1
http://i.imgur.com/8LB7W5l.jpg?1
Solid motor mounts for S-Chassis. - $75
Solid aluminum mounts, never used. Just dirty from my box of stuff. Go for $100 on eBay. Make your car pleasure your woman like you never could with these bad boys.
http://i.imgur.com/wpXAvac.jpg?1
25mm s13 popup front widebody fenders. - $40
One is broken, but can be fixed. As all fiberglass can. Get it out of my sight.
http://i.imgur.com/GudeCXY.jpg?1
BN Sport S13 Hatch rear bumper. - $50
Definitely trashed. But I know you assholes like this shit. Can be repaired to perfect, as my Asian friend made my other bumper look brand new with a little patience.
http://i.imgur.com/6RfaLdL.jpg?1
(2) Two - 18x10.5J +25 Saleen Replicas. - $200
Hypersilver. Lip thrash from drift spares. Tires are shot.
http://i.imgur.com/R8Kx82O.jpg?1
http://i.imgur.com/tpJuC5g.jpg?1
S13 6 bolt axles (Pair) - SOLD
http://i.imgur.com/UAIoAg9.jpg?1
Remanufactured Brake Master Cylinder form O'Reillys. Used for 10 events. - $20
http://i.imgur.com/6zqyIyx.jpg?2
Advanced Auto Parts Clutch Master Cylinder - $10
Old one died at an event, bought this one, threw it in, cars been parked ever since.
http://i.imgur.com/6zqyIyx.jpg?2
S13 5 speed clutch steel line - $20
http://i.imgur.com/6zqyIyx.jpg?2
Clutch Slave Cylinder - $10
http://i.imgur.com/RsB9VEh.jpg?2
s13 5-speed driveshaft - $60
http://img809.imageshack.us/img809/777/driveshaft.jpg?1
180sx 2 piston front brakes and oversized 5 lug rotors. $150
Q45 performance without the bulk.
http://i.imgur.com/oQbJP0V.jpg?2
Contact J.J. @ 404-483-3779 for more info. Prices are pretty firm, dont waste my time. Will ship at buyer's expense.
Cast welding was done by TopSpeed. Its legit. Ran them for 2 seasons. Same design as me, Chris Ward, and Whatever210 ran for all these years.
http://i.imgur.com/hr430G5.jpg?2
ISIS 4" Dual Straight Pipe Exhaust w/ test pipe. - SOLD
Good condition, no holes. Needs some scrubbing. Free test pipe with purchase.
http://i.imgur.com/4RHCNby.jpg?1
http://i.imgur.com/QEqnFha.jpg?1
Momo Start 2007 (Production 10/2010) FIA Certified racing bucket seat. - $300
Larger than most, but not big. Used for one event, but doesnt fit with my big head and my oversized roll cage. Has a 3 inch tear on the top seam from installing.
http://i.imgur.com/orv7UWp.jpg?2
http://i.imgur.com/8hSitx5.jpg?2
Turbo Dave fabricated side mount S13 seat bracket. Fits with the Momo but can be used for others. - $75
http://i.imgur.com/GNOZz4U.jpg?2
Koyo Aluminum Radiator, KA24DE/RB20/LSX - SOLD
Previous idiot spray painted it. No leaks. Ran it on my KA, SR, and probably my LS if it doesnt sell. I think I have a radiator coming in so I don't need it. I can't remember.
http://i.imgur.com/kHWsGZK.jpg?1
http://i.imgur.com/8LB7W5l.jpg?1
Solid motor mounts for S-Chassis. - $75
Solid aluminum mounts, never used. Just dirty from my box of stuff. Go for $100 on eBay. Make your car pleasure your woman like you never could with these bad boys.
http://i.imgur.com/wpXAvac.jpg?1
25mm s13 popup front widebody fenders. - $40
One is broken, but can be fixed. As all fiberglass can. Get it out of my sight.
http://i.imgur.com/GudeCXY.jpg?1
BN Sport S13 Hatch rear bumper. - $50
Definitely trashed. But I know you assholes like this shit. Can be repaired to perfect, as my Asian friend made my other bumper look brand new with a little patience.
http://i.imgur.com/6RfaLdL.jpg?1
(2) Two - 18x10.5J +25 Saleen Replicas. - $200
Hypersilver. Lip thrash from drift spares. Tires are shot.
http://i.imgur.com/R8Kx82O.jpg?1
http://i.imgur.com/tpJuC5g.jpg?1
S13 6 bolt axles (Pair) - SOLD
http://i.imgur.com/UAIoAg9.jpg?1
Remanufactured Brake Master Cylinder form O'Reillys. Used for 10 events. - $20
http://i.imgur.com/6zqyIyx.jpg?2
Advanced Auto Parts Clutch Master Cylinder - $10
Old one died at an event, bought this one, threw it in, cars been parked ever since.
http://i.imgur.com/6zqyIyx.jpg?2
S13 5 speed clutch steel line - $20
http://i.imgur.com/6zqyIyx.jpg?2
Clutch Slave Cylinder - $10
http://i.imgur.com/RsB9VEh.jpg?2
s13 5-speed driveshaft - $60
http://img809.imageshack.us/img809/777/driveshaft.jpg?1
180sx 2 piston front brakes and oversized 5 lug rotors. $150
Q45 performance without the bulk.
http://i.imgur.com/oQbJP0V.jpg?2
Contact J.J. @ 404-483-3779 for more info. Prices are pretty firm, dont waste my time. Will ship at buyer's expense.