IHI VN14 turbo/ Power Enterprise 1420

[jR1_kS14]

This turbo is a modified IHI turbo from Power enterprise. It is one of their "Response Series" turbos. The PE1420 turbo utilizes a slant-flow blade design which allows the turbo to spool at an incredibly low RPM and still give out good horsepower gains all the way up to redline. Since the angle of the flanges are similar to the S14 and S15 turbos, Power Enterprise has attached a few extras to this kit to make the turbo compatible. Installation is quite simple with this kit, making this a plug and play turbo. This turbo hits hard from 2500 rpm with good power all the way to 7,000 giving it a very broad, usable power band.

Compressor
Dual Ball bearing turbocharger
Inducer
1.79"/45.5mm
Exducer
2.37"/60mm

Turbine
Exducer
1.73"/44
Inducer
1.89"/48mm

There is no shaft play. It's a dual ball bearing turbo. It will NOT come with the HKS actuator.

$650

http://zilvia.net/f/attachment.php?attachmentid=45594&stc=1&d=1351457646

http://zilvia.net/f/attachment.php?attachmentid=45592&stc=1&d=1351457646

http://zilvia.net/f/attachment.php?attachmentid=45593&stc=1&d=1351457646

http://zilvia.net/f/attachment.php?attachmentid=45591&stc=1&d=1351457646

http://zilvia.net/f/attachment.php?attachmentid=45590&stc=1&d=1351457646

[jR1_kS14]

anyone want this turbo?

[jR1_kS14]

no one??????????????????

[garretar]

no one??????????????????
Hi, PE1420 still available ? conditions ?