A bunch of 240 parts

[E36slide]

I'm re doing my 240 so I'm parting a lot of stuff off my car to make way for new parts.

S13 hood:80 new paint no dents looks good painted white

Lights and housings with motors: 60 dollars

S13 pig nose with lip: 150 will not part lip or I will for 150 and you will get bumper free

S13 shark nose fenders one has a small crack but fixable 8/10 condition: 50 for both or 25 a piece

Rotora bov like new: 40 dollars

Hks ssqv: 50 dollars

eBay type rs bov: 40 dollars

Real recaro seat- 400 cash offer obo or two s13 seats and 300 will have rail too bolt into a s13/s14 seat condition 9/10

Dmax tail lights- 100

S14 tein inner and outer new- 100 takes both or 60 outers and 80 inners



Will add more parts as I upgrade

6783617046

Need pics text me ill add some later

[Scotsman]

or you can add pics now

[E36slide]

or you can add pics now

No I can't now I'm in the middle of de greasing and painting a engine bay. Some of these shouldn't need pics. I've seen many fs part threads with no pics.

[E36slide]

http://i1076.photobucket.com/albums/w447/Dmoney240/A8380923-439F-4561-A923-1F557B95EA47-2740-000002D5F99F24A7.jpg
http://i1076.photobucket.com/albums/w447/Dmoney240/EFF481CE-608C-4BDA-9413-57A26FE6DC2A-2740-000002D5F525BBCC.jpg
http://i1076.photobucket.com/albums/w447/Dmoney240/14C66F03-F0CF-429C-B793-06809A44AE28-2740-000002D5F0A43C71.jpg
http://i1076.photobucket.com/albums/w447/Dmoney240/B37EC146-2721-40A5-9C93-246554C58AC7-2740-000002D5EC579149.jpg
http://i1076.photobucket.com/albums/w447/Dmoney240/C49E10DD-C0DB-4C62-A3B7-14B10CA3E705-2740-000002D5E6CD1212.jpg
http://i1076.photobucket.com/albums/w447/Dmoney240/2A228D2F-DA90-4818-ADEB-0AF90F6D28D0-2740-000002D5E612F9AA.jpg
http://i1076.photobucket.com/albums/w447/Dmoney240/251A76C6-79D5-40F5-95A6-859D2D2C609A-2740-000002D5E18D931F.jpg
http://i1076.photobucket.com/albums/w447/Dmoney240/05FD3494-7E87-4337-A680-9FA6B1ECBDAA-2740-000002D5DD406328.jpg
http://i1076.photobucket.com/albums/w447/Dmoney240/EAD1D7F3-1587-4450-B96C-52B07E638940-2740-000002D5D8C6156F.jpg

[E36slide]

Will ship or deliver parts everything is obo

[whatever210]

Wow...I don't even know what to say.

[Sinfix_15]

Whats ur new plan for the nose?

[JITB]

Where u located? Want the ssq

Sent from my DROID BIONIC using Tapatalk 2

[E36slide]

Whats ur new plan for the nose?

Sil front

[E36slide]

Where u located? Want the ssq

Sent from my DROID BIONIC using Tapatalk 2

Lawrenceville

[E36slide]

Wow...I don't even know what to say.

Why?


Turns out this car had a good bit of problems.

Stock head gasket stock studs on 19 pounds smh! It's getting a full over haul

[Sinfix_15]

Why?


Turns out this car had a good bit of problems.

Stock head gasket stock studs on 19 pounds smh! It's getting a full over haul

Not as easy to be me as you thought it was eh???? My sr20 has been on 25psi for years.... new owner still driving it and happy with it. Would make a cross country trip tomorrow. Big difference in a well built car running within it's means reliably and a poorly built car running at it's breaking point trying to keep up.

Id also like to point out my previous wisdom where i said i didnt trust the mechanical condition of this vehicle....... you whole heartedly objected to this and gave your word that this car was mechanically sound. Just another scenario where i was right again. I would say "i hate to say i told you so", but i actually love saying i told you so.

Enjoy the learning experiences you're destined to endure. Look forward to seeing the Sil conversion.

[David88vert]

If there was no O2 sensor, then the EMS should have gone rich immediately.

If you are bouncing off the rev limiter while under load, and with heat soak already, you are asking to pop the head gasket.

[E36slide]

If there was no O2 sensor, then the EMS should have gone rich immediately.

If you are bouncing off the rev limiter while under load, and with heat soak already, you are asking to pop the head gasket.

Exactly what I was thinking that's why I was mad. That's why I'm replacing it now. I'm glad I didn't already cause any damage. It could have been avoided if I was told the truth.

[E36slide]

Car also runs rich. I was told because it was tuned that way. Also a lie it's from no o2. The motor stalls because to much fuel is being dumped.

[E36slide]

car was tuned rich so it woudnt lean out on top end while drifting.

Oh so it was tuned to run rich at idle ? Yeah gtfo

I told him everything I knew about the rb26 I should have kept my miata. I was suckered but that will be the last. I was very honest about it since I knew cb7tuner previously from the miata ect he's a cool dude so I had no reason to lie. I knew it was a maf issue from the get go but didn't know it needed two mafs. Again I've never owned a rb26 with a single turbo setup. It wasn't like I was lying about information like he did to me. He said Sammy helped him install the head gasket...lie...copper sprayed head gasket...lie hell I don't think y'all even replaced it. The previous owner must have because this motor has been rebuilt. Also had bad blow by in the head from a stuck PVC valve. I mean Jesus all this shit could have been fixed very easily. Instead y'all half assed it and now your pointing blame on me as if I'm horrible at building or working on a car.


We will see when I post the build thread. The shit I'm doing will give sinfix a boner. I'm pretty much proving to all you fucking re tards that I can actually build a car correctly. So far I've deff done a better job then y'all did.

[E36slide]

http://i1076.photobucket.com/albums/w447/Dmoney240/_facebook_-1949925268_.jpg
http://i1076.photobucket.com/albums/w447/Dmoney240/_facebook_-2068939531_.jpg
http://i1076.photobucket.com/albums/w447/Dmoney240/_facebook_-615291400_.jpg

Miata when I had it ^^^^^



http://i1076.photobucket.com/albums/w447/Dmoney240/_facebook_-133600472_.jpg


Miata after your shitty attempt of a paint job^^^^^

[JITB]

Still want the ssqv! Lol when are you free this week?

Sent from my DROID BIONIC using Tapatalk 2

[E36slide]

Still want the ssqv! Lol when are you free this week?

Sent from my DROID BIONIC using Tapatalk 2

I'm free now or anytime after work man text me 6783617047

[RandomGuy]

This is a for sale post, not a feedback/discussion post...

Stop threadcrapping/trolling for sale section.

If it's a serious issue (which it wasn't, looked more like highschool drama)
Then post a thread in this section: SELLER/BUYER FEEDBACK (http://www.importatlanta.com/forums/seller-buyer-feedback/)

If someone adds bullshit to your thread, then click the report post button:

[E36slide]

This is a for sale post, not a feedback/discussion post...

Stop threadcrapping/trolling for sale section.

If it's a serious issue (which it wasn't, looked more like highschool drama)
Then post a thread in this section: SELLER/BUYER FEEDBACK (http://www.importatlanta.com/forums/seller-buyer-feedback/)

If someone adds bullshit to your thread, then click the report post button:

Thanks man

[E36slide]

Also have foho side skirts for 150 they oem style skirts in good condition

[E36slide]

Bump

[cashed240]

still have tein inner and outer for s14?

[E36slide]

still have tein inner and outer for s14?

Nope but I do have some brand new 2001 maxima inner and outer tie rods. There just as thick, but longer so they will give you more angle if you remove your bump stops. I only want 40 for them I paid 90. There made by moog so there good quality.

6785495408

Sent from my myTouch_4G_Slide using Tapatalk 2