Del sol intake mani ?

[CDangerfield]

I'm putting in a skunk2 intake manifold in my del sol but am having a really hard time getting the lower center nut off the original one connected to the block. Engine is still in car. Any advice?

[CDangerfield]

bumpp

[Sir_Christopher]

get two nuts, put one backwards and one regular, tighten up the nuts onto one another, use a wrench on the nut closest to the block and turn that bitch until she unscrews!

[CDangerfield]

I cant even get a wrench on the nut. The space is too small. It's fucking awkward...

[D3UC3S]

Are you coming in from the top? Its easier to take the oil filter off and come from underneath

[stealth1]

Its easier to take the oil filter off and come from underneath

this and you may have to use the open end of a wrench. But be careful and don't force the nut, you may strip out the head of the nut. if that makes any sense.....and if you have a short wrench it may be easier.

[CDangerfield]

I'm going in from the bottom and yes, the oil filter is in the way... The torque on the nut is too great for any wrench I have and it is so awkward to put a hand up in there and try to get a grip on the nut. Ugh...

[NOCLUE]

Swivel sockets are from heaven

[CDangerfield]

Swivel sockets are from heaven

This guy knows what gets the all wet in the pants.