Lenso dr1 light weight race spec rims

[E36slide]

I have a set of lenso rims

17x9 front 17x10 rear very light weight

They go for over 2k new even ebay has knock offs for 1600

I'm wanting 1000 obo they have tires in good condition.

Will accept other rims and cash not looking for a straight trade.

6788367169



http://i1076.photobucket.com/albums/w447/Dmoney240/2012-10-05_21-04-21_738-1.jpg
http://i1076.photobucket.com/albums/w447/Dmoney240/FB_IMG_13495419075143889.jpg
http://i1076.photobucket.com/albums/w447/Dmoney240/2012-10-05_21-04-36_987-1.jpg
http://i1076.photobucket.com/albums/w447/Dmoney240/IMG_20121006_141652.jpg
http://i1076.photobucket.com/albums/w447/Dmoney240/2012-10-05_21-04-49_645-1.jpg
http://i1076.photobucket.com/albums/w447/Dmoney240/2012-10-05_21-04-56_944.jpg









Sent from my DROID BIONIC using Tapatalk 2

[NBP01LS]

Lenso D1R ...17x9 17x10 (http://240atlanta.com/forums/showthread.php?77877-Lenso-D1R-17x9-17x10)
might wanna re think that price a bit....

[E36slide]

Lenso D1R ...17x9 17x10 (http://240atlanta.com/forums/showthread.php?77877-Lenso-D1R-17x9-17x10)
might wanna re think that price a bit....

Nah ex owner didn't know what they were worth. Ill take 1k. You can buy xxrs for 650.

Sent from my DROID BIONIC using Tapatalk 2

[NBP01LS]

lol, glws!

[WhiteAccord]

Off\set?

[E36slide]

Off\set?

Have no idea man

Sent from my DROID BIONIC using Tapatalk 2

[silents1ick]

Nah ex owner didn't know what they were worth. Ill take 1k. You can buy xxrs for 650.

Sent from my DROID BIONIC using Tapatalk 2

FYI ...i knew exactly how much they were worth...

[eltravieso]

Give u some 20s and 100$

[Franco Tirador]

repped!!

[E36slide]

FYI ...i knew exactly how much they were worth...

Giving how you priced them i couldn't tell. Or could ur comment "i didn't even know what they were worth" be the reason i said that.

Sent from my DROID BIONIC using Tapatalk 2

[Black R]

Look at the back of the wheels and post offset pls.

[Scotsman]

Look at the back of the wheels and post offset pls.here ya go "dirty wang"

17x9+30 235/40 17
17x10+15 245/40 17

[Black R]

Willing to split the set?

I like the offset on the rears.

Front not so much.

[E36slide]

Willing to split the set?

I like the offset on the rears.

Front not so much.

Negative ghost rider

Sent from my DROID BIONIC using Tapatalk 2

[Sclub13]

Lol I was gonna get these from the original owner for a camera.... But then you bought the car.... lol.

[E36slide]

Lol I was gonna get these from the original owner for a camera.... But then you bought the car.... lol.

Lol that would have been a good deal for you man

Sent from my DROID BIONIC using Tapatalk 2

[Sclub13]

I know I was kinda upset when he said you didn't bail. Whatever, I got Real Bride seats for the camera instead. GLWS man. They are worth the asking price people.

[E36slide]

I know I was kinda upset when he said you didn't bail. Whatever, I got Real Bride seats for the camera instead. GLWS man. They are worth the asking price people.

Thanks man

Sent from my DROID BIONIC using Tapatalk 2

[jcatz]

I have a set of billet specialties gtxt 65. 17x7.5 -10 17. 8.5 -10.
https://sphotos-b.xx.fbcdn.net/hphotos-snc7/579444_3375529740879_354177301_n.jpg
Also have a set of bmw 18x8 +24 with a pair of adapters.
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/580141_4187968371337_1869881378_n.jpg

[E36slide]

I have a set of billet specialties gtxt 65. 17x7.5 -10 17. 8.5 -10.
https://sphotos-b.xx.fbcdn.net/hphotos-snc7/579444_3375529740879_354177301_n.jpg
Also have a set of bmw 18x8 +24 with a pair of adapters.
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/580141_4187968371337_1869881378_n.jpg

I like the first ones more. What kind of deal did you have in mind?

Sent from my DROID BIONIC using Tapatalk 2

[jcatz]

The tires are pretty much new, only have about 600 miles on them. Billet Specialties are not cheap wheels, forged faces, spun barrels. They were 550 a piece new. The gtx65s are very rare. the last set I've seen for sale can be found here. Florida Billet Specialties GTX65 wheels with Nitto 555 tires - Third Generation F-Body Message Boards (http://www.thirdgen.org/techboard/exterior-parts-sale/538838-billet-specialties-gtx65-wheels.html)
Shine with a mirror finish after a fresh polish, 1968 Chevy Camaro Photo 6 (http://www.chevyhiperformance.com/featuredvehicles/1001chp_1969_chevy_camaro/photo_06.html)

The outer barrels are round minus, one tiny bend on one rear wheel, not noticeable from more than 5 feet, about a 1inch flat section. One of the front wheels inner barrel was bent and repaired,. All balance and none are cracked or have any defects that inhibit performance.

With that being said, I've always liked the way Lenso Dr-1s looked and think it would be cool to have a set, at least for a little while. I am not in a financial position to add any amount of cash. I thought I would offer a trade and see what you thought.

The offsets are aggressive for a factory body, you will most likely at least need a fender pull.

https://sphotos-a.xx.fbcdn.net/hphotos-snc7/397109_2645995822987_1522365899_n.jpg

https://sphotos-a.xx.fbcdn.net/hphotos-snc7/384111_2645993302924_1393426241_n.jpg

https://sphotos-a.xx.fbcdn.net/hphotos-snc7/385557_2696160757079_1624091609_n.jpg



https://sphotos-a.xx.fbcdn.net/hphotos-snc7/485664_3375532460947_1861488265_n.jpg

[jcatz]

and this is hilarious, I offered a trade up on these here, Lenso D1R ...17x9 17x10 (http://240atlanta.com/forums/showthread.php?77877-Lenso-D1R-17x9-17x10)

the guy never got back to me even though he said he was interested, -_-

[E36slide]

and this is hilarious, I offered a trade up on these here, Lenso D1R ...17x9 17x10 (http://240atlanta.com/forums/showthread.php?77877-Lenso-D1R-17x9-17x10)

the guy never got back to me even though he said he was interested, -_-

I'm interested. No need for cash do you have any other s14 parts. Looking for skirts suspension parts ect. Deff like those rims. I'm located in lawrenceville

Sent from my DROID BIONIC using Tapatalk 2

[jcatz]

I do have a few various s14 bumper, panels, and skirts laying around, but I don't think I'd be willing to do any more than a straight trade. I'm located in auburn Alabama. Worst case scenario, perhaps I can sell you a bumper or something?

[E36slide]

I do have a few various s14 bumper, panels, and skirts laying around, but I don't think I'd be willing to do any more than a straight trade. I'm located in auburn Alabama. Worst case scenario, perhaps I can sell you a bumper or something?

Damn ur pretty far

Sent from my DROID BIONIC using Tapatalk 2

[jcatz]

yeah, it's about a 3 hour drive. Here's a the link to the thread I just posted listing most of the various parts I have if you're interested in purchasing anything.
http://www.importatlanta.com/forums/nissan-infiniti-parts/333138-various-s14-parts-wheels.html#post39459216

[E36slide]

I want the rims but don't want to drive lol

Sent from my DROID BIONIC using Tapatalk 2

[E36slide]

Might be interested in the side skirts, front lip and rear defuser. Waiting to see if this dude will still have this kit when i get paid

Sent from my DROID BIONIC using Tapatalk 2

[jcatz]

I'll be at petit lemans saturday, not sure if I can bring these with me though. Maybe I can make the drive up there if you'd want to do a straight trade, I'll have to think about it though. I gotta make sure I won't regret getting rid of my wheels.

[E36slide]

I'll be at petit lemans saturday, not sure if I can bring these with me though. Maybe I can make the drive up there if you'd want to do a straight trade, I'll have to think about it though. I gotta make sure I won't regret getting rid of my wheels.

Id be down to straight trade on wheels

Sent from my DROID BIONIC using Tapatalk 2

[jcatz]

I'm still thinking on it. I won't be able to take them with me saturday, so I'll have to make the drive another time if I want to trade. If you want to come get em, I'll trade. I have to think on the drive though.