PDA

View Full Version : 2001 Subaru Impreza WRX RSTI



techlord
10-05-2012, 09:12 PM
I cannot even tell you the hours that have been spent getting her to this point over the years. 2 complete cars created her, tons of go fast bits, no expense spared...there is a $HITTON of money invested to get her where she is!!!

I have done my absolute best to create the most pristine swapped subaru coupe out there. I started with my rarely driven 2003 wrx with 56K and swapped EVERYTHING into a 2001 Subaru Impreza 2.5 RS with 76K on the clock. I blew the engine running too much boost and had a meth pump failure. She has been fully rebuilt bigger, better, and stronger with new paint and MORE!!!

Price- $20,000 - WILL DO PARTIAL TRADES FOR MAN STUFF...GUNS and STUFF...EMAIL ONLY - [email protected]

I WILL NOT RESPOND HERE AS I'M TOO BUSY WITH WORK, KIDS AND WORK BLOCKS THE SITE - EMAIL IS THE TICKET!

VIN AVAILABLE ON REQUEST AND VEHICLE WILL COME WITH 2 TITLES! ONE FOR THE 2001 2.5RS AND ANOTHER FOR THE WRX!

IF YOU SHOW UP WITHOUT CASH YOU WILL NOT GO FOR A RIDE! SERIOUS BUYERS ONLY!!!


I WILL negotiate with any SERIOUS buyer! PAYMENT WILL BE CASH - PERIOD!!!

Swap was completed by AllPro Subaru in Alpharetta Ga! Brandon L.
UDAMAN!!!

Everything swapped from a 2003 wrx with 56K into a 2001 2.5RS with 76K!

Full harness, gas tank, katskinz leather, etc...Already had the 2007 6mt,
TEIN's, and turbo. Less than 5000mi on new built engine with lots of head work flow tested.

The dyno below is before the rebuild and that graph is WITH METHANOL
injection hooked up @ 25psi. It is still installed but I decided NOT to use it since
the 93 street tune on this rebuild is as powerful as the graph below if not
more.

http://i119.photobucket.com/albums/o134/WRX4U2NV/2011-02-04122215.jpg

http://i119.photobucket.com/albums/o134/WRX4U2NV/DSC00486.jpg

Engine/Transmission


Cobb AP v2
Rebuilt 2.5L
New CP Forged 2618 pistons
ACL Race bearings
ARP Head Studs
Cosworth 12mm Oil pump
03 WRX Heads with STI cams, FLOW TESTED (have the results if interested)!
REV SS +1mm in&Ex valves, nitrided, hardened tips
Bosh 1000cc injectors
Deadbolt 18G port, polish, clipped and heat treated
2007 STI 6MT (6spd) bought brand new about 12k miles probably less
ACT Light Weight Flywheel with interchangeable contact surface
ACT 6 Puck sprunk clutch disk and Pressure Plate rated at 425ft lbs
Turbo XS (i think) FMIC core with APS piping
SMC meth injection kit - installed but NOT hooked up!!!
SPT 6mt Short Shift kit with linkage
HKS Carbon Ti Exhaust
Maddad EQ length Header
Tial 44 external WG
Nvidia catted downpipe
Perrin Inlet pipe
Mizu Aluminum Radiator
Forge Recirc BOV
TGV Deletes
Injen CAI chopped down to fit (see pics)
IXIZ Pitch Stop
Group N Motor and Tranny mounts
Stainless Steel Braided Power Steering line


Suspension/Brakes


Tein Flex CO's with EDFC (rebuilt ~12k ago)
Wilwood 6 piston Front Big Brake kit new X drilled Slotted rotors
Wilwood 4 piston rears all new with X drilled Slotted rotors (driven for the few thousand miles until the redeux)
White Line Front Sway bar and endlinks
WhiteLine Rear Sway bar and endlinks
WhiteLine Steering Rack bushings
STi Aluminum Control Arms
JDM STi Carbon Fiber Front Strut bar
some JDM rear strut bar Beefy (label has japenese markings)


Interior


Custom Katzkin 2 tone leather seats from the 03 WRX
Custom JPM Coachworks Doorcards and Rear cards to match seats (Rear cards NOT installed yet - too busy)
JPM Coachworks Leather Shift boot
STi EDM black face Gauge cluster
NEW OEM 2.5RS Carpet
New OEM 2.5RS Floor mats
New OEM rear Trunk Mat
CRAPTASTIC - Autometer Oil Pressure and Boost Gauges in the cluster pod
Alpine head unit
Polk speakers


Body/Exterior


Brand New OEM 2.5RS paint with 2 coats of clear(AMAZING how much red metallic with a fresh paint job!!!)
New Fender Flares Painted to match (fenders cut, welded, sealed with welded screw inserts where aplicable other hardware used for plastic areas)
Huge CF hood scoop painted to match (I have the stock RS hood scoop w/o fresh paint if this is TOO big)
Morettes headlights bezel painted to match (Not installed or pictured - Part of what is left to complete) current stock headlights are installed
Smoked lower front signal lamps
Prodrive CF front lip spoiler
Brand new OEM Side Skirts
Brand New XXR 522 18" X 9.5" +35
Brand New Advan Neova AD07 265-35-18


I am certain I have forgotten some things, like wilwood SS brake lines all around, SS Turbo oil feed line, Brand new Wilwood pads went on with the rotors, have the missing engine cover plastic thing missing in the pictues.
Just to name a few and many extra parts like spare tails, side markers and but loads of other crap but definitely worth money. Been doing this a while I have truck loads. Seriously...
More pictures
http://i119.photobucket.com/albums/o134/WRX4U2NV/DSC00464a.jpg
http://i119.photobucket.com/albums/o134/WRX4U2NV/DSC00465a.jpg
http://i119.photobucket.com/albums/o134/WRX4U2NV/DSC00482.jpg
http://i119.photobucket.com/albums/o134/WRX4U2NV/DSC00481.jpg
http://i119.photobucket.com/albums/o134/WRX4U2NV/DSC00480.jpg
http://i119.photobucket.com/albums/o134/WRX4U2NV/DSC00469-1.jpg
http://i119.photobucket.com/albums/o134/WRX4U2NV/DSC00477.jpg
http://i119.photobucket.com/albums/o134/WRX4U2NV/DSC00483.jpg
http://i119.photobucket.com/albums/o134/WRX4U2NV/DSC00485.jpg
Some interior shots - I NEED TO UPDATE THESE BECAUSE THE DASH IS BACK TOGETHER!!! I have spare dash pieces if you want to relocate or remove meth or DCCD controllers!
http://i119.photobucket.com/albums/o134/WRX4U2NV/DSC00470.jpg
http://i119.photobucket.com/albums/o134/WRX4U2NV/DSC00471.jpg
http://i119.photobucket.com/albums/o134/WRX4U2NV/DSC00472.jpg
http://i119.photobucket.com/albums/o134/WRX4U2NV/DSC00486.jpg
The bad
She is STIFF but handles like a gocart. I am still hunting down all the rattles, the built engine is noisy but powerful and I believe I have a warped rotor.
AAAAAAAAAND this tiny scratch that I so foolishly didn't realise the car was too close to the garage door and opened it. This was one aweful F'ing day! lol
http://i119.photobucket.com/albums/o134/WRX4U2NV/scratch.jpg

Last but not least, I've seen many members on the streets and NO I WILL NOT RACE YOU! I understand you want to see her go but the streets are not the place to play!!!
thanks for looking and remember EMAIL ONLY.

Steezy-Ek
10-08-2012, 09:24 PM
Damn! Beautiful car! Glws

Sammich
10-09-2012, 06:07 AM
love this car

CHADbee
10-09-2012, 08:11 AM
Honestly this car is borderline magazine feature worthy, It is a damn good possibility I could have got you a feature in Super Street or Import Tuner....................but then, the wheels *sigh*

oh well....very nice car, I just don't understand why all that was done and you couldn't have at least bought some Enkei's.

Sammich
10-09-2012, 08:12 AM
^i mean....you never know...i'd do a shoot just cuz...how many of these gorgeous mofos you see around, this caliber.

CHADbee
10-09-2012, 08:15 AM
^i mean....you never know...i'd do a shoot just cuz...how many of these gorgeous mofos you see around, this caliber.

It doesn't work like that, the editor has to approve the car before I shoot it and they just don't run cars with XXR's.

Sammich
10-09-2012, 08:18 AM
:(

techlord
10-09-2012, 04:28 PM
chad tell sharif to buy me some high end rimz to toss on and we'll do this. LOL
S Siegel and I are good friends ask him about me (rick). I am a cheap ass.
I waited close to 4 years and 5 cars total to build this and the race car (exactly the same but with L body beat to hell and a HUGE turbo). I'm patient but haven't had some $2000 wheels present themselves at a good price.

techlord
10-09-2012, 04:30 PM
Oh and thanks for the props guys.

CHADbee
10-09-2012, 06:33 PM
chad tell sharif to buy me some high end rimz to toss on and we'll do this. LOL
S Siegel and I are good friends ask him about me (rick). I am a cheap ass.
I waited close to 4 years and 5 cars total to build this and the race car (exactly the same but with L body beat to hell and a HUGE turbo). I'm patient but haven't had some $2000 wheels present themselves at a good price.

I'm a cheap ass too so I understand, but I'm going to spend $1000-ish bucks for some light weight wheels but it sure as hell won't be volk/advan/hre/ect....I can't afford to destroy "baller" wheels on track. I just hate XXR's with a passion so please don't take it personal, I'd just LOVE to see this car with some NT03's ;) the rest of it deserves at least that.

techlord
10-10-2012, 08:46 AM
Nothing taken personal to each their own...I did have some prodrive P1's that looked very similar to the NT03's and was tired of the look. AND what a PITA to clean! I don't plan any track for this car EVER (race car for that)and the xxr's had the offset, width and look I was trying to achieve.
just curious why you hate XXR? I understand they are cheap but the weight isn't heavy for their size IMO just over 20lbs.

98blackcivic
10-12-2012, 06:29 PM
nice gc8

l Gizzy l
10-16-2012, 10:14 AM
he hates them cuz Mags wont shoot cars with XXRs :D

ha I dont understand the hate either, I run XXR's on my Z, but only cuz I would MUCH rather replace a $150 wheel than a $1000 Volk.

l Gizzy l
10-16-2012, 10:15 AM
Clean subi, sir. btw GLWS

techlord
11-03-2012, 04:27 PM
Thanks...TTT

tnomud
11-09-2012, 07:05 AM
Kick Ass Car.

Side note: DO you really expect anyone on this forum to have $20G in weapons? ;)

Doppelgänger
11-29-2012, 03:39 PM
Ugh...want a GC8 so bad. Trade for Miata? lolol
Really nice car though...I'm jealous.

techlord
12-29-2012, 09:12 PM
Kick Ass Car.

Side note: DO you really expect anyone on this forum to have $20G in weapons? ;)

Nah, but a few weapons can make the cash part much easier.

Sammich
12-31-2012, 08:02 AM
i'm just back in here to let you know my desire to own this wonderful machine, that's all.

Doppelgänger
01-02-2013, 10:08 AM
I'm still jelly.

I've been skimming NASIOC for swapped RSs' hoping I can get a trade eventually. Beautiful car man.

techlord
01-03-2013, 12:14 PM
try rs25.com there are some really affordable ones there. Not the same league as mine but very nice deals to be had.

Doppelgänger
01-04-2013, 09:06 AM
Thanks for the info.
Bump for you.

techlord
01-19-2013, 06:47 PM
UPDATE:
Short block sold!
PPG 5MT installed
2007 6MT (18000mi ) with Spiider DCCD controller interior piece with contoller now comes as a spare.
Price is back to $20000
Will sell the 6MT separately for the right price!!!

tnomud
01-23-2013, 10:28 AM
passed you on 85S one day last week in the rain, nice car!!!!

Sammich
01-23-2013, 11:26 AM
can i trade you my car and my soul for this?!

techlord
01-24-2013, 07:58 PM
passed you on 85S one day last week in the rain, nice car!!!!
wasn't me there is a very similar flared coupe just not as nice as mine