Some rotaries having fun (2 FC RX-7's sliding around)

[RandomGuy]

http://www.youtube.com/watch?v=2taF68sbc-k

Special-K is the driver the two-toned FC

[KeepOnTruckN]

BADASS

[4Dr_Teg]

dam rotary owners.....don't have nothing else better to do...LOL! pretty nice tho!

[Keebs ð¿ð]

I miss having something I could go out and be reckless in :( It's just not the same anymore

[Special-K]

I hear that. Reckless is fun. We do a lot of drifting also. Trying to set up some video coverage. Stunt shit round here. Lol glad you all enjoy.

[TheVengeance]

found it.. siick!

[Special-K]

Damn rotary owners? I have 2 hondas also. But then again, I am one of the rare gearheads these days, that isn't biased towards vehicles. I like a lot. Just not a POS Ford.

[Elbow]

Rotaries suck.

[Special-K]

Where is your videos? Just sayin... a lot of cars suck, to a lot of different people. That's what makes this so fun. Umadbro? It Clearly states 2 FC RX7's in the thread title.......don't watch it or leave comments, if they suck. Just putting that out their.......

[RandomGuy]

I think he's trolling

[Elbow]

Where is your videos? Just sayin... a lot of cars suck, to a lot of different people. That's what makes this so fun. Umadbro? It Clearly states 2 FC RX7's in the thread title.......don't watch it or leave comments, if they suck. Just putting that out their.......

:lmfao:

It was a joke. "UMADBRO?" lol I heart rotaries.


http://www.youtube.com/watch?v=ZPtM8a1I2Bs

I guess if you get mad about "where is my video" here's one. Excuse my paddy cake paddy cake steering wheel movement, can't stand that wheel.

[E36slide]

Where is your videos? Just sayin... a lot of cars suck, to a lot of different people. That's what makes this so fun. Umadbro? It Clearly states 2 FC RX7's in the thread title.......don't watch it or leave comments, if they suck. Just putting that out their.......

^lol he's mad

Sent from my DROID BIONIC using Tapatalk 2

[Relentless]

Hey Simon, whats up with your rearview mirror leaning in every corner? lol

[Elbow]

Hey Simon, whats up with your rearview mirror leaning in every corner? lol

LOL Yeah I need to fix that too, I think it's held on with duct tape, that was my first time in the car since buying it so there's a few things that are being worked out. lol I have a wink mirrior now just need to put it in.

[Boosted FC]

Such a damn shame that some RX7 owners take no pride in how their cars look anymore.

[Relentless]

LOL Yeah I need to fix that too, I think it's held on with duct tape, that was my first time in the car since buying it so there's a few things that are being worked out. lol I have a wink mirrior now just need to put it in.

Lolol

[Special-K]

my video would have been sideways. but good show. atleast you are on a track. I live life on the edge, highway drifts and warehouse complexes lol

[Elbow]

my video would have been sideways. but good show. atleast you are on a track. I live life on the edge, highway drifts and warehouse complexes lol

You're saying you would have been sideways around Road Atlanta?

Good luck...lol

[Special-K]

Done it. That's why we are pro's

[Elbow]

Done it. That's why we are pro's

You have not drifted an entire lap of Road Atlanta.

If you have, when, with who, and where's the video? Pro? What makes you a pro? Just curious. lol

[E36slide]

You have not drifted an entire lap of Road Atlanta.

If you have, when, with who, and where's the video? Pro? What makes you a pro? Just curious. lol

No offense but i call bull shit on that as well. You would need a good 400whp to do that sort of thing. Plus a rotary would probably blow up if it wasn't built especially all that constant high reving. A lap is pretty fucking long....hope you rebuilt the motor after that lap.

Sent from my DROID BIONIC using Tapatalk 2

[Elbow]

No offense but i call bull shit on that as well. You would need a good 400whp to do that sort of thing. Plus a rotary would probably blow up if it wasn't built especially all that constant high reving. A lap is pretty fucking long....hope you rebuilt the motor after that lap.

Sent from my DROID BIONIC using Tapatalk 2

Yeah you do know rotaries are made to last with "all that high revving" right? lol The beauty of a rotary.

In fact to keep a rotary healthy you NEED to rev the crap out of it frequently.

[E36slide]

Yeah you do know rotaries are made to last with "all that high revving" right? lol The beauty of a rotary.

In fact to keep a rotary healthy you NEED to rev the crap out of it frequently.

I understand that but not burning out the whole length of road atlanta lol

Sent from my DROID BIONIC using Tapatalk 2

[Elbow]

I understand that but not burning out the whole length of road atlanta lol

Sent from my DROID BIONIC using Tapatalk 2

Depends what RPM you're at, I still bet a rotary would far outlast a piston engine at that level. lol

[E36slide]

Depends what RPM you're at, I still bet a rotary would far outlast a piston engine at that level. lol

Maybe... but im saying he probably doesn't have a car that could put out the power you would need to drift a whole constant lap not just turns and such.

Sent from my DROID BIONIC using Tapatalk 2

[Elbow]

I can't think of a club that would allow it. lol

[E36slide]

I can't think of a club that would allow it. lol

None would since it would tear the track up too bad lol

Sent from my DROID BIONIC using Tapatalk 2

[Special-K]

Actually you all do know that we have a shop with a FC pushing 538hp and its only at 28lbs. Thanks but I do have a car that does it. And videos? Check em out after I post when we do out drift expo just around our whole complex of warehouses. And drift atlanta is held at road atlanta. I'm not saying the whole track is drifted by me, but I am sideways around most turns and a pro, yeah been sideways since I was 14. Come do a video, you can see in person just how much of a pro. Oh and umm yeah, bout to have my Honda sideways and my 88 FC boosting 20lbs(automatic) fun stuff.

[Elbow]

Actually you all do know that we have a shop with a FC pushing 538hp and its only at 28lbs. Thanks but I do have a car that does it. And videos? Check em out after I post when we do out drift expo just around our whole complex of warehouses. And drift atlanta is held at road atlanta. I'm not saying the whole track is drifted by me, but I am sideways around most turns and a pro, yeah been sideways since I was 14. Come do a video, you can see in person just how much of a pro. Oh and umm yeah, bout to have my Honda sideways and my 88 FC boosting 20lbs(automatic) fun stuff.

Oh OK. Well you said if you were in the video I posted you'd be sideways.

Drift Atlanta is held at Road Atlanta yes, but a very small portion of it. lol I use to be into drifting, not so much now.

[E36slide]

Actually you all do know that we have a shop with a FC pushing 538hp and its only at 28lbs. Thanks but I do have a car that does it. And videos? Check em out after I post when we do out drift expo just around our whole complex of warehouses. And drift atlanta is held at road atlanta. I'm not saying the whole track is drifted by me, but I am sideways around most turns and a pro, yeah been sideways since I was 14. Come do a video, you can see in person just how much of a pro. Oh and umm yeah, bout to have my Honda sideways and my 88 FC boosting 20lbs(automatic) fun stuff.

I hope it's a 20b.......

Sent from my DROID BIONIC using Tapatalk 2

[Boosted FC]

538hp @ 28lbs?

What size turbo you running?

[eraser4g63]

538hp @ 28lbs?

What size turbo you running?

T-toobig...

[Special-K]

:)

[Special-K]

its just a mid frame turbo. its a daily

[DoriDori]

GET YOU SUM!!!!