rear disk conversion

[The BUCKY]

about to do a rear disk conversion on my del sol. goin from drum to disk. wondering how i am gonna get the fluid to the back. before i get any smart answers i know i need brake lines but i am wondering what kind. any info is appreciated.

[-S Double C-]

You can use the brakes lines on the rear disc. However if there are none then get brake lines for the type of car the rear disc came off of..rear disc swaps are easy. I can uninstal and instal them in less then a hour.

[-S Double C-]

after you hook up the brakes line and e-brake cables bleed the whole system..

[EJ25RUN]

yeah, you dont need new fluid lines, just the 40/40 proportional valve and

the brake cables. you can also get a better booster and master cylinder

but my friends car brakes fine without it.

if you really want to get brake lines, get earl's steel braided brake lines.

[The BUCKY]

well the car has drums on the rear so i need new lines i know. do i still need the valve? where can i get this stuff?

i know i am gonna put stainless to the calipers so if that helps.

[EJ25RUN]

well the car has drums on the rear so i need new lines i know. do i still need the valve? where can i get this stuff?

i know i am gonna put stainless to the calipers so if that helps.

ok, YOU DONT NEED NEW LINES

i just said about the stainless part if you wanna mod but you can use the

ones from your drums. get the 40/40 prop valve from a junkyard from any

dc or da teg that originaly had disks in the back.