Paroykos
09-02-2012, 12:47 PM
Manufacturer: Enkei
Make: J-Speed III (discontinued, not remade like the current J-Speed's)
Diameter: 16"
Width: 7"
PCD: 4x114.3 (Hubcentric 4x100 adapters are around $165 shipped from Adaptec)
Offset: +25
Condition: Wheels have some typical nicks and scratch's for their age, but zero bends or cracks. Original valve stems included.
Lugnuts: Will come with a set of BNIB Gorilla small diameter spline drive lugnuts and key-$40 value!
Trades: Other 15" or 16" wheels (NO FAKE WHEELS! No Rota, XXR, MB, etc.), preferably in 4x100.
Price:
$1100 shipped OBO
$1000 P/U OBO
Too high? Click here and buy these. (http://www.memoryfab.com/wheels/used/20091211113840)
Do you have a Civic or Integra and think, "These are the wrong bolt pattern?" I also have a 1996 Honda Integra Type R brake conversion which will allow you to run these wheels, have approx. 5mm more offset, have rear disc brakes (for you DX guys!), and 10.3" front disc brakes.
Price:
$315 P/U (No shipping!)
Do the math! For $1350 you can have VERY rare JDM rims, JDM brakes, BNIB Gorilla lug nuts, and some nice STANCE! Pay to Play!
Contact: Call me at 407-233-9623 or email at [email protected] or just shoot me a PM! Items located in Central Florida.
Set (tires not included):
http://farm9.staticflickr.com/8142/7185193781_8f53976eb2_b.jpg
Single rim (brake setup not included):
http://farm8.staticflickr.com/7232/7370428710_7c3469daa3_b.jpg
Single rim (tire not included):
http://farm8.staticflickr.com/7235/7370428536_a4ccb1ed3e_c.jpg
Original Inspection Label
http://farm9.staticflickr.com/8437/7914460740_33f8ed2dca_z.jpg
Beautiful Wheel (specific brake setup not included) http://www.tamparacing.com/forums/tamparacing/smiles/icon_wink.gif
http://farm9.staticflickr.com/8042/7914460934_861a0273f8_z.jpg
15" J-Speed III's on an EG hatch (will remove if owner wishes):
http://farm8.staticflickr.com/7223/7370428448_f3775710fa_b.jpg
Make: J-Speed III (discontinued, not remade like the current J-Speed's)
Diameter: 16"
Width: 7"
PCD: 4x114.3 (Hubcentric 4x100 adapters are around $165 shipped from Adaptec)
Offset: +25
Condition: Wheels have some typical nicks and scratch's for their age, but zero bends or cracks. Original valve stems included.
Lugnuts: Will come with a set of BNIB Gorilla small diameter spline drive lugnuts and key-$40 value!
Trades: Other 15" or 16" wheels (NO FAKE WHEELS! No Rota, XXR, MB, etc.), preferably in 4x100.
Price:
$1100 shipped OBO
$1000 P/U OBO
Too high? Click here and buy these. (http://www.memoryfab.com/wheels/used/20091211113840)
Do you have a Civic or Integra and think, "These are the wrong bolt pattern?" I also have a 1996 Honda Integra Type R brake conversion which will allow you to run these wheels, have approx. 5mm more offset, have rear disc brakes (for you DX guys!), and 10.3" front disc brakes.
Price:
$315 P/U (No shipping!)
Do the math! For $1350 you can have VERY rare JDM rims, JDM brakes, BNIB Gorilla lug nuts, and some nice STANCE! Pay to Play!
Contact: Call me at 407-233-9623 or email at [email protected] or just shoot me a PM! Items located in Central Florida.
Set (tires not included):
http://farm9.staticflickr.com/8142/7185193781_8f53976eb2_b.jpg
Single rim (brake setup not included):
http://farm8.staticflickr.com/7232/7370428710_7c3469daa3_b.jpg
Single rim (tire not included):
http://farm8.staticflickr.com/7235/7370428536_a4ccb1ed3e_c.jpg
Original Inspection Label
http://farm9.staticflickr.com/8437/7914460740_33f8ed2dca_z.jpg
Beautiful Wheel (specific brake setup not included) http://www.tamparacing.com/forums/tamparacing/smiles/icon_wink.gif
http://farm9.staticflickr.com/8042/7914460934_861a0273f8_z.jpg
15" J-Speed III's on an EG hatch (will remove if owner wishes):
http://farm8.staticflickr.com/7223/7370428448_f3775710fa_b.jpg