PDA

View Full Version : FS/FT - 84 RX7 GSLSE Roller with Rare Pacifica Widebody Kit



aws140
08-19-2012, 07:16 AM
Unfortunately, I have to abandon my widebody project, but other priorities take precedence at this time.

It's a 84 GSLSE with approximately 67K on the chasis, a clean title, and hasn't ever been wrecked. It has ZERO wheel (http://rotarycarclub.com/rotary_forum/showthread.php?t=16161#) well rust and is a VERY structurally sound chasis that has never been wrecked and has a clean title. Most parts are there, just not currently installed. I hate to let it go, but I have to. It was black from the factory and has been primered flat black by a previous owner. The PO was running a carbed 13B with a big port job, so it's currently set up for a carb, but can easily be switched back to FI. The Pacifica kit needs a little fiberglass work and then you'd have an awesome platform for whatever route you choose.

To ease with loading and transportation the springs have been elevated and the front bumper (http://rotarycarclub.com/rotary_forum/showthread.php?t=16161#) and lower lip have been removed.

$1300 OBO

May be interested in trades. Just let me know what you have.

aws140
08-23-2012, 07:48 PM
bump

Sir_Christopher
08-23-2012, 09:08 PM
looks like a fun project

aws140
09-01-2012, 09:36 PM
Thanks. It is a great platform. I just hate that I can't pursue it.

aws140
10-12-2012, 11:58 PM
***UPDATE***

A friend and I recently spent a lot of time doing a lot of fiberglass and body work to the kit: bridged B pillar gap, filled cracks and pits, and "unmolded" fenders from side skirts. Just need to do some final sanding and filling and it'll be squared away and ready for paint.

Also, I have a running GSLSE engine, harness, ECU, manifolds, etc. sitting in front of the car. It's essentially pretty much everything you need to swap in a running SE motor. I pulled it from a buddy's running car to swap in a ported 4 port into his SE.

Due to the magnitude of the work performed, and my reduced lack of rush to sell, the price is back up to $1500 as is, or $2000 with the running engine package.

I will eventually post updated pics.

aws140
11-04-2012, 11:05 AM
Bump for a great Winter project to have ready for the Spring!

larossa9
11-07-2012, 01:00 AM
looks a lot like a 944!! and bump for a killer deal on a cool car

aws140
11-25-2012, 08:14 PM
Updated pictures and information:

Wide Body GSLSE For Sale (http://www.rx7club.com/1st-generation-rx-7-1979-1985-vehicles-109/%2A%2Arare-pacifica-widebody-84-gslse-roller%2A%2A-1007603/)

aws140
12-02-2012, 01:01 PM
obo

aws140
01-21-2013, 09:19 PM
ttt

aws140
04-14-2013, 11:42 AM
BRAP!!

Leaving for Alaska in a month and need the garage space to store my 1979 RX7. Someone come get this great deal.

I installed a new brake master cylinder a few weeks ago, but haven't bled the system. Too busy planning to drive to Alaska soon.

http://25.media.tumblr.com/tumblr_mblhhyopLU1r1mtsdo1_400.gif

$1200 as-is
+$500 with motor, manifolds, wiring harness, etc.
+$300 with full Racing Beat exhaust, header to muffler

Will not sell the motor and exhaust separate, don't ask. If it doesn't sell, then I need them to install whenever I get back.



Motivation:
http://i53.tinypic.com/24zb05u.jpg