View Full Version : 1985 SR5 1UZFE Drift/Daiily Build ATL Ga
1sickZ
08-10-2012, 03:09 PM
New Update:
Build will include:
Engine - 2002 Tahoe LS1
Trans - R154
Custom Adapter to mate trans to Engine
Cressi Front 5 lug 5X114.3
Custom Drive shaft
Manual Steering rack from MR2
Fuel Cell
PERFECT complete Interior
A few updates:
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/FrontSuspension.jpg
Add some extended wheel studs
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/Studs.jpg
Upgraded bushings for strength
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/Bushings.jpg
Engine and Trans Coming Together
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/LS120Pallett_zpsm5160sh5.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/97b672e8-a4a9-4dc8-ab63-3c539b7f5d6b_zpsbelsbmwr.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/R154%20Mounted%20Full_zpsykcfy77e.jpg
dragoncelica
08-10-2012, 04:52 PM
OHH MY>>>!
This is going to be sick, Harrison is giving you a hand on it right? he is one of my best students, he's good!
Love your car bro, just keep us posted!
Genji-Sama
08-10-2012, 07:16 PM
Wow, definitely itchin to see how this turns out :goodjob:
1sickZ
08-10-2012, 08:46 PM
He actually has all my parts for the swap
He picked up the Front suspension etc from the cressi from the pull part etc and also the wiring harness and ecu so we should be getting there shortly...
Tran and rear end aare waiting to be put in..
Josh
SB-Autoworks
10-12-2012, 10:01 PM
Any updates on this build?
1sickZ
10-15-2012, 01:49 PM
I am in the process of gathering suspension parts car is a roller waiting to start next stage of build... waiting on the money fairy to drop some bills my way...LOL
Josh
silversol
10-15-2012, 09:47 PM
What kinda rear axel is that? looks like a ford 8.8
Edit didnt read the whole thread!
dragoncelica
10-15-2012, 10:54 PM
As far as i can see it looks like a Chevy 10 bolt from a S10 pick em up truck!
Nahhh, i knew it already beforehand!
1sickZ
10-16-2012, 07:47 AM
Yeah its a 10 bolt from S10 pickup..
I will be sourcing my suspension next prob some camaro shocks AGX and some 6k rear springs and 8-10 K front springs. I need to bushings and such for Harrison to box in the front a arms and other stuff to finish up the suspension so we can start on engine and trans etc.
Josh
1sickZ
01-11-2013, 11:01 AM
I need to update this thread its dragging.. I will have updates asap.. will be getting suspension buttoned up and rear end buttoned up and then the engine build begins...
Josh
1sickZ
01-22-2013, 10:28 AM
Well this project is stalling so i have moved it to Dragon Celia Place and will have regular updates shorlty..
Josh
1sickZ
01-27-2013, 02:45 PM
Picked up Rear end on Sat Jan 26th will give updates once Juan has space to take the rolla to his house for work..
Josh
dragoncelica
01-28-2013, 04:53 PM
hey now!:lmfao::lmfao::lmfao::lmfao:
1sickZ
01-29-2013, 07:34 AM
WHAT... its the truth.....LOL
Josh
1sickZ
01-29-2013, 07:35 AM
Well I kind of just starting dropping off stuff at Juan's place and I think my pile is beyond alotted space.....LOL But that is OOOO TAAHHHH...
Josh
1sickZ
02-06-2013, 07:02 PM
Have my first day of training this upcoming Sat so I can update on Sat. Will be working on getting the rear end cleaned up and any pre work before the car is moved to Juans Place.
Josh
dragoncelica
02-06-2013, 11:04 PM
this will be fun LOL!
fun apart, i cant wait to finish couple of the cars i got here to deal with yours!
1sickZ
02-07-2013, 01:51 PM
HA AHA AHA HA LOL
Josh
1sickZ
02-21-2013, 01:00 PM
IM WAITING ON JUAN to get other peeps stuff outta my way...LOL
Josh
1sickZ
03-14-2013, 08:11 AM
So we are moving the car to Juans place this weekend and will have updates shortly once he has a chance to look it over and give me some info on how we will complete it etc. I will be sending my wiring harness to Tweaked Perf to get it plug and played for the swap so it will easy peasy for Juan the FAB MAN... Keep you posted.
Josh
On_Her_Face
03-14-2013, 08:18 AM
Cheese and Rice. I want to see the finished process.
1sickZ
03-14-2013, 08:22 AM
I know I can only go as fast as my fabricator... LOL
Josh
1sickZ
03-18-2013, 08:48 AM
Car is now at Juans Place Yeah maybe now i can get some thing done on this build..
Josh
1sickZ
03-27-2013, 09:01 PM
So change of plans new plans are:
Fully Built Turbo 3TGTE short Block
Forged Rods
Forged Crankshaft
Forged Pistons ( Wiseco87 MM Turbo)
Hi Volume Oil Pump
W50 Metal Case Celia Tran HOLDS up to 450HP
Mopar rear end with minispool
This build will allow me to keep better weight distribution and use of Hachi handling. Better parts better performance etc
Thats it so far..
Josh
1sickZ
04-11-2013, 07:32 AM
Updated pics in first post. FYI
Josh
dragoncelica
04-11-2013, 11:14 PM
This will be fun, cant wait to start on it!
1sickZ
04-12-2013, 07:08 AM
Will be dropping the block off this net week to have it bored and honed... All build parts have been purchased will order turbo this week.
Josh
1sickZ
04-14-2013, 11:07 AM
Dropped money off for Turbo and engine to get machined.
Details include:
Block hot tanked
Bored over to 87MM
Will not need honed as we are not upgrading main studs
All new plugs etc
Mon: Turbo will be ordered:
Precision 6262
Head will be cleaned and rebuilt using
Stainless Valves
Bronze valve Guides
Vitton Valve Seals
Race Springs
Race Rockers
Rev to 9K
Will also be sending out the rear axles to Moser to be shortened for Hachi rear.
Josh
1sickZ
04-19-2013, 07:30 AM
Head parts came in on Mon and the Turbo was ordered as well.
Hoping to have block ready by early next week.
Josh
1sickZ
04-24-2013, 12:25 PM
I got a GIANT snail in the mail...LMAO
Josh
1sickZ
05-16-2013, 10:43 AM
Finally got the block back from the machine shop with cam bearing installed... will post pics up asap.
Josh
1sickZ
05-16-2013, 07:35 PM
Pics added
Josh
1sickZ
08-13-2013, 05:32 AM
Builder has returned have dropped off money for Turbo Cam and will be ordering soon.
Once Cam comes in the BUILD will begin... I will see if he can send me some pics asap.
Josh
dragoncelica
08-14-2013, 11:15 PM
Yeap im back, and cam money just clears so ordering cam tomorrow!
shit is getting interesting now!
1sickZ
08-18-2013, 02:05 AM
Your never interesting...LOL
dragoncelica
08-19-2013, 11:40 PM
Fag
1sickZ
08-22-2013, 10:19 PM
LMAO...
Josh
1sickZ
09-14-2013, 11:08 PM
I decided to keep Rolla so my build thread will go on.. once the stupid cam gets grinded and shipped back...
Josh
1sickZ
10-14-2013, 12:40 PM
Bump pics added to first post reassembly begins and soon we will have the BEAST...
Josh
1sickZ
10-16-2013, 06:21 PM
More pics added
Josh
1sickZ
10-18-2013, 06:00 PM
He went mad on my block and head look at the sick pics on first post yeah baby its coming together....
Josh
dragoncelica
10-18-2013, 09:53 PM
I picked this up from TN. I have the formost expert working with me on my build so this build should be built to SPEC
Build will include:
Cressi Front 5 lug 5X114.3
Tacoma Rear end 5X114.3 with LSD insert
Fully Built 3TC with Forged Internals est ( 375hp to wheels)
Custom Mounts
Custom headers
Custom Exhaust
W50 trans with steel case from Celica
Custom Driveshaft
Manual Steering rack from MR2
Fuel Cell PERFECT complete Interior
A few updates:
I have gotten my manual steering rack from my MR2
Will be getting my Cressi front end from the junk yard and also brake upgrade for front and rear
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/Rolla2.jpg?t=1365596913
Ordering Cressida front suspension and getting Toyota rear set up for install.
Front Suspension 5 lug swap from MX83 Cressi
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/FrontSuspension.jpg
Add some extended wheel studs
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/Studs.jpg
Upgraded bushings for strength
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/Bushings.jpg
Rear End that will never break plus 5 lug swap
NEW REAR END: TOYOTA 1993 7.5 inch rear end with drums and Will be upgraded with a locker for traction.
https://sphotos-b.xx.fbcdn.net/hphotos-snc6/257899_4534705448488_132262626_o.jpg
LOCKER:
http://www.my4by.com/images/ggp_quick_lok_inset.jpg
Video of how it works:
http://www.youtube.com/watch?feature=player_embedded&v=kL0hPEOStGk
Finally we moved to Juan's House will have updates ASAP and progress...about time
http://i306.photobucket.com/albums/nn275/93240secoupe/Project/IMG_1422_zps93c058c9.jpg
New Update:
Putting together my fully built forged 3TC with new parts that came in:
Eagle H-Beam Rods
Cometic Standard Headgasket
ARP Head Studs
Wiseco Forged Piston CR 7.5.1 (drop shipped from Wiseco)
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/photo1_zps2629599a.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/photo2_zps19c490be.jpg
Pistons came in Wednesday PM.
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/photo1_zpsac58b122.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/photo2_zps5387ba4b.jpg
Head Parts for 9000 RPM
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_9664_zpse5b95933.jpg
Stainless Steel Valves and bronze Valve Guides
New Precision 6262 Showed up today MAD Powa:
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_4414_zps0bd09600.jpg
Block is back from Machine Shop also have polished crankshaft .
http://i306.photobucket.com/albums/nn275/93240secoupe/Project/image_zps26d291b3.jpeg
http://i306.photobucket.com/albums/nn275/93240secoupe/Project/image6_zps649e3f3b.jpeg
http://i306.photobucket.com/albums/nn275/93240secoupe/Project/image5_zps792080ef.jpeg
http://i306.photobucket.com/albums/nn275/93240secoupe/Project/image4_zps2f124d16.jpeg
http://i306.photobucket.com/albums/nn275/93240secoupe/Project/image3_zpsc62e2115.jpeg
http://i306.photobucket.com/albums/nn275/93240secoupe/Project/image2_zps462a1c08.jpeg
Block being reassembled for install:
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_1796_zpsabe97616.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_1797_zps3a83e46e.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_1798_zpsc44f3228.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_1799_zps74473781.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_1801_zps75f64878.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_1802_zpsbe350af1.jpg
Timing
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_1818_zps64caa0d8.jpg
High Volume Oil Pump
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_1819_zps5e7f1aa5.jpg
ARP Flywheel Bolts
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_1817_zps06b9a777.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_1816_zpsbf279855.jpg
Timing Cover
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_1820_zps0114b3f6.jpg
Oil Pan
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_1821_zps5266b57a.jpg
Bottom End Buttoned Up Waiting on HEAD:
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_1826_zpsb001f91c.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_1829_zps603c0c8c.jpg
Head Is NOW PORTED AND POLISHED
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_1834_zps8211f6bc.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_1835_zps5505d914.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_1836_zps09420ab5.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_1837_zps2f81530c.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/IMG_1838_zpsb7902de1.jpg
Damn, put the pictures in the last post faggot, LOL!
D3UC3S
10-19-2013, 08:31 AM
Hahahaha. No doubt.
Gonna be a beast tho. Been watching this.
dragoncelica
10-19-2013, 06:20 PM
More head porn
http://i31.photobucket.com/albums/c390/CANDUNGO1515/Mobile%20Uploads/null_zps914ae55e.jpg (http://s31.photobucket.com/user/CANDUNGO1515/media/Mobile%20Uploads/null_zps914ae55e.jpg.html)
http://i31.photobucket.com/albums/c390/CANDUNGO1515/Mobile%20Uploads/null_zps6c7890d8.jpg (http://s31.photobucket.com/user/CANDUNGO1515/media/Mobile%20Uploads/null_zps6c7890d8.jpg.html)
1sickZ
10-19-2013, 09:03 PM
Man you holding out on me had the post the best pics yourself... I see how it is..
Josh
1sickZ
10-30-2013, 02:36 PM
Lol new donor car.. Awweeee snap its soo niiiiiccccceeee..
D3UC3S
10-30-2013, 03:50 PM
Pics would be nice
1sickZ
10-30-2013, 09:52 PM
There in the first post....
Josh
D3UC3S
10-30-2013, 10:24 PM
Ain't nobody got time for that
1sickZ
10-31-2013, 10:20 AM
Ohh geez...
1sickZ
10-31-2013, 10:22 AM
I just found my new donor car for this build 1981 TE72 and will be trading my 1985 SR5 for it.
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/Teaser_zps969ce332.jpeg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/RightSide_zps370a57c5.jpeg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/Interior_zps95d46bd5.jpeg
1sickZ
11-05-2013, 07:27 PM
Updates:
Clutch Disc - ACT 6 puck unsprung
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/3a9aa385-4c95-407e-b0a2-0289b3a9c195_zpse9954844.jpg?t=1383700807
Pressure Plate - ACT HD Plate
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/PressurePlate_zpsbc44b9e3.jpg?t=1383700848
TAIL BOV 50MM and Wastegate 44MM
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/Wastegate_zpseb661873.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/BOV_zpsf9c76283.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/Injector7502_zpsf32196a4.jpghttp://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/Injector7502_zpsf32196a4.jpg
Camber Hats with Adjustment
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/CamberAdjuster_zps88cabfbd.jpg?t=1383700896
RC Injectors 750CC
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/Injector750_zpsbc0be798.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/Injector7502_zpsf32196a4.jpg
D3UC3S
11-05-2013, 10:12 PM
Sweet dude! Gotta love a shit load of new parts!
Just found out I will be starting my swap sooner than later. My buddy is giving me his SB350 out of his first gen K5 blazer CST when he drops a SB400 in for more power. May be bringing it up to Juan's lair to pick his brain..
13bra21
11-06-2013, 11:06 AM
Swaps are the shizz!! lol. Tax time is creeping around the corner :crazy: Dont know if i should get a 13bre swap or focus on cosmetics.
Looking foward to seeing that v8 conquest build!!
1sickZ
11-06-2013, 11:31 AM
Nice I have SBC Vortec in my garage taking up space...LOL
Josh
1sickZ
11-24-2013, 01:16 AM
Oh snap the fun is about to begin...
http://i31.photobucket.com/albums/c390/CANDUNGO1515/Mobile%20Uploads/0BF28F46-7C7E-4B2C-8A7B-B59A2A22B0AF_zpsbtc5i99i.jpg
http://i31.photobucket.com/albums/c390/CANDUNGO1515/Mobile%20Uploads/B7D2D68E-4F3E-4E18-9506-9D889F677BCC_zpsfkm4vpsq.jpg
http://i31.photobucket.com/albums/c390/CANDUNGO1515/Mobile%20Uploads/B73A570B-E2F8-4A68-916D-BF134352D47B_zpsst6eitnf.jpg
Soon this will have a the engine trans and spooled rear end in it...
Josh
1sickZ
11-26-2013, 01:59 PM
Head being ported and polished - Reassembled.
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/Head2_zps38f3998f.jpeg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/Head_zpsbc3488f5.jpeg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/Head3_zps28f60d6a.jpeg
Just need to get head decked and then engine and trans in the car.
Josh
1sickZ
12-03-2013, 03:39 PM
Update on Engine Build - its complete...
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/Head1_zpsc9ca8dba.jpeg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/ValveCoveron_zps176aa44f.jpeg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/FrontEngine_zps4e652e3d.jpeg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/RightSide_zpsad050bd0.jpeg
Josh
1sickZ
04-04-2014, 01:31 AM
Just got new pics from builder on rear end and hopefully soon will be ready for the street.
Mopar Rear End shortened to fit
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/RearEnd1_zpse2e17951.jpeg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/RearEnd2_zps2b1f1637.jpeg
Rear Wheels and Tires
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/TireSizeRotation_zps83892b41.jpeg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/WeldWheel_zps93cae9e3.jpeg
Josh
13bra21
06-30-2014, 05:33 PM
Any updates on the build?
1sickZ
07-08-2014, 03:58 PM
Not yet waiting on Juan to get back from PR....
Slow and steady
Josh
1sickZ
05-07-2015, 09:48 AM
So this thread has died and I have changed and re changed etc. So new info is as follows.
Project Car still 1981 Corolla TE72
Engine - 2002 LS1
Trans - R154
Not sure on rear end yet..
Currently have engine and trans and adapter to mate.. LOL
Will update once I have some pics..
Josh
1sickZ
08-05-2015, 01:24 PM
New Update:
Build will include:
Engine - 2002 Tahoe LS1
Trans - R154
Custom Adapter to mate trans to Engine
Cressi Front 5 lug 5X114.3
Rear End For Toyota truck 5 lug with LSD
Custom Drive shaft
Manual Steering rack from MR2
Fuel Cell
PERFECT complete Interior
A few updates:
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/FrontSuspension.jpg
Add some extended wheel studs
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/Studs.jpg
Upgraded bushings for strength
http://i1244.photobucket.com/albums/gg576/86turbo4agte/Hachi/Bushings.jpg
Engine and Trans Coming Together
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/LS120Pallett_zpsm5160sh5.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/97b672e8-a4a9-4dc8-ab63-3c539b7f5d6b_zpsbelsbmwr.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/R154%20Mounted%20Full_zpsykcfy77e.jpg
Custom Low Profile Oil Pan for Clearance
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/LS%20Low%20Profile%20Oil%20Pan_zpsewne9x6u.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/LS%20Low%20Profile%20OIl%20Pan%20Head%20on_zpsmhf4 2nvb.jpg
1sickZ
08-11-2015, 10:25 AM
Purchased Car style complete intake plus alot of other parts for install.. will post pics soon.
1sickZ
10-19-2015, 08:34 AM
Update.. We have refreshed engine with valve Springs and New Cam plus new Gasket kit for entire engine. Also prepped and wrinkle coated all required areas.
Also Front Coil overs are ready plus 5 lug
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/IMG_5770_zps4kpgvelb.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/IMG_5767_zpsfvziil7j.jpg
Pic of my intake and valve covers wrinkle coated.
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/IMG_5787_zpslzeksqao.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/IMG_5788_zpsoxhukitl.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/IMG_5798_zps4jdhuuht.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/IMG_5796_zpsfukbi6q1.jpg
Coilovers built will be painted and prepped prior to installation.
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/IMG_5675_zpshy2cz9ny.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/IMG_5676_zpswt5wes09.jpg
http://i1244.photobucket.com/albums/gg576/86turbo4agte/TE72%201981/IMG_5677_zpssqo6skyp.jpg
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.