PDA

View Full Version : My 2004 WRXTi Build



justinxecushyn
07-13-2012, 09:47 AM
I've been through several different motors and turbos. This is my current and probably final setup:

Current Setup

B.R.E.D. Built Longblock:

-AP 2.5 Short block
-New EJ257
-New BRED Rods
-King Rod Main Bearings
-BRED Forged Piston 2618
-Oil Passage Modifications
-New OEM Case Bolts and O-Rings
-Main Journals Line Honed
-Crank, Rods, and Pistons Balanced
B.R.E.D. HeadStg1

-Ferrea +1mm valves
-Ferrea Viton Valve Steam Seals
-GSC Beehive Valve springs
-Full Valve job with head refresh
-GSC S1 cams
-ARP headstuds
-AllPro heat resistant intake manifold spacers
-CRP Pro Series Timing Belt kit w/water pump
-Grimmspeed EBC
-APS 3" Inlet
-Walbro 255 (considering going with a 400 or equiv)
-Agency Power fuel system (lines, rails)
-Invidia Turboback (3" downpipe, Q200 Catback)
-Turbo XS FMIC
-ATP GT35r Turbo
-TiAl QR bypass
-Competition Clutch stage 2 clutch
-Megan Race mounts
-UEL SS Headers
Suspension:
DF210 Springs

ATP GT35r
http://i50.photobucket.com/albums/f321/justinxecushyn/Scooby/ATT_1341847815876_photo1.jpg

GSC S1 Cams
http://i50.photobucket.com/albums/f321/justinxecushyn/Scooby/20120206_131940.jpg
http://i50.photobucket.com/albums/f321/justinxecushyn/Scooby/20120206_131352.jpg

Bad Ass Valves:
http://i50.photobucket.com/albums/f321/justinxecushyn/Scooby/20120206_131429.jpg

Custom Pistons Head 1:
http://i50.photobucket.com/albums/f321/justinxecushyn/Scooby/20120203_160153.jpg

Custom Pistons Head 2:
http://i50.photobucket.com/albums/f321/justinxecushyn/Scooby/20120203_160142.jpg

Fuel stuff:
http://i50.photobucket.com/albums/f321/justinxecushyn/Scooby/IMG-20110621-00773.jpg

Headers:
http://i50.photobucket.com/albums/f321/justinxecushyn/Scooby/headerwrapped.jpg

Distruction of old motor:
http://i50.photobucket.com/albums/f321/justinxecushyn/Scooby/block.jpg
http://i50.photobucket.com/albums/f321/justinxecushyn/Scooby/bentrod.jpg
http://i50.photobucket.com/albums/f321/justinxecushyn/Scooby/imagejpeg_2.jpg
^^ Quarter is for reference of size of pistons pieces

First FMIC and Lip pic:
http://i50.photobucket.com/albums/f321/justinxecushyn/Scooby/317317_10150334358645547_500950546_8207792_1812553 056_n.jpg



Old Dyno Chart pretty much stock motor with 20g turbo:
http://i50.photobucket.com/albums/f321/justinxecushyn/Scooby/Scan001.jpg

I'll try and remember to put up a recent chart after my next tune.

Austin?
07-13-2012, 06:13 PM
Where the build picture?

RandomGuy
07-14-2012, 07:22 AM
:ttiwwp:

98blackcivic
07-14-2012, 10:08 AM
yea wtf?

justinxecushyn
07-14-2012, 01:00 PM
Pics have been added.

justinxecushyn
03-06-2013, 10:02 PM
Changed turbos to dom 2.5xtr last year august/september. 400+hp 400+tq with bad intake and a boost leak.