my corolla s (zelda)

[nismo_b14]

2010 toyota corolla s. thoughts and ideas. hate her or love her!

Lowered on eibach springs: 1.4 in front and 2.0 in back

[DontHate]

I like it, plans?

[nismo_b14]

I like it, plans?

thanks...diamond white hids, 17 or 18 inch wheels, roof rack maybe, trd seat belt buckles and trd knob.

[Catnip]

One of a few that I don't mind working on! Bet she gets great mpgs too.

[Dylan]

Wheels, suspension, and tint will have you sitting right :goodjob:

[cactusEG]

Would make a nice DD

[quickdodge®]

thanks...diamond white hids, 17 or 18 inch wheels, roof rack maybe, trd seat belt buckles and trd knob.

No, no and no, no, no and no.


Wheels, suspension, and tint will have you sitting right :goodjob:

(Maybe) yes, yes and (maybe) yes. Later, QD.

[Sinfix_15]

The 19s off a toyota highlander fit your car and carry a style kinda like the oem wheel. They actually look really good to me. Would look factory.... which is a good thing.... but with a big wheel, like this big car needs.

http://i729.photobucket.com/albums/ww298/fgrm1979/highlander19.jpg
http://images.craigslist.org/5I25G55M33E13L53p7c5n9b8786bc4cb2190d.jpg

[Genji-Sama]

Like it, all you need is a set of coils, wheels and ride :goodjob:

[nismo_b14]

The 19s off a toyota highlander fit your car and carry a style kinda like the oem wheel. They actually look really good to me. Would look factory.... which is a good thing.... but with a big wheel, like this big car needs.

http://i729.photobucket.com/albums/ww298/fgrm1979/highlander19.jpg
http://images.craigslist.org/5I25G55M33E13L53p7c5n9b8786bc4cb2190d.jpg

a little too big for a rolla lol.

[nismo_b14]

No, no and no, no, no and no.



(Maybe) yes, yes and (maybe) yes. Later, QD.

maybe just wheels then...

[green91]

These cars are soooo much nicer than the old corollas. I think they make great DD cars, and with good suspension/tires are decent handling cars, too. Looks good!

[PTCDC5]

I like it because it's stock. Don't mess it up with a bunch of crap like diamond white plug-and-play blind oncoming driver HIDs.

[Sinfix_15]

a little too big for a rolla lol.

idk man, all these new cars have fender wells big enough to camp out in. New Mustang makes 20s look small.

[quickdodge®]

maybe just wheels then...


idk man, all these new cars have fender wells big enough to camp out in. New Mustang makes 20s look small.

On this car, I'd personally go no bigger than 16. I might try and sneak a 17" wheel in there, but that would be a stretch for me. Later, QD.

[Genji-Sama]

^^^Isn't OEM 17? Maybe, I could've pulled that out of my arse?

[Sinfix_15]

On this car, I'd personally go no bigger than 16. I might try and sneak a 17" wheel in there, but that would be a stretch for me. Later, QD.

Unless i'm misjudging the size of this car, i dont think you'd have to sneak 17s in. I've got 18s on my Lancer and its smaller than a corolla. Still have wheel gap and it doesnt scrub even on max angle turns.

Depends on what you like i guess... im positive 18s would fit like OEM, 19s would probably scrub on occasion. I personally like to fill the wheel well up as much as possible as long as it doesnt effect driveability or require abnormal camber. I used to be a 15-16 wheel guy.... but with new cars, i feel like 18s are the new 15s.

Here's a corolla on 20s...........
http://1.bp.blogspot.com/_FoXyvaPSnVk/RynWpW2o09I/AAAAAAAAZ-w/aBmwdD6xCww/s1600/CarScoop-2009_Corolla_S3_2.jpg

[quickdodge®]

^^^Isn't OEM 17? Maybe, I could've pulled that out of my arse?

I actually have no idea what the OEM size is, lolol. If it is, then 17s probably wouldn't be a bad choice.


Unless i'm misjudging the size of this car, i dont think you'd have to sneak 17s in. I've got 18s on my Lancer and its smaller than a corolla. Still have wheel gap and it doesnt scrub even on max angle turns.

It's not the fit thing for me, Sin. I've just always been a fan of smaller wheels. Comes from being a West Coaster, I suppose. I'd put the 17 or 16 wheel on the car and lower it to get rid of wheel gap.


Depends on what you like i guess...

This hits it, right there. I like 'em small, you like 'em big. Later, QD.

[Sinfix_15]

I actually have no idea what the OEM size is, lolol. If it is, then 17s probably wouldn't be a bad choice.



It's not the fit thing for me, Sin. I've just always been a fan of smaller wheels. Comes from being a West Coaster, I suppose. I'd put the 17 or 16 wheel on the car and lower it to get rid of wheel gap.



This hits it, right there. I like 'em small, you like 'em big. Later, QD.

what converted me was tire selection. I like a lot of smaller wheels, but i hate how as the rims get smaller, the available tire only gets bigger. If the smallest tire available for a 16 is gonna put me at a 19.5" overall diameter and i can get a 19.5" overall diameter with an 18 inch rim/tire, im gonna go with the 18.

[green91]

Stock alloy on S model are 16"

[Bacon]

I like these cars. I would say a 17" with 215-45 tires and lowered more just to remove wheel gap. A 35% tint wouldn't be bad though. Light enough to see clearly yet dark enough to keep it cool inside. As for lighting, I am still a fan of Silverstar Ultra bulbs.

Then again......do you. We can create ideas for you but not plans of your own.

[dc2killa]

Sweet! You make me want a Corolla now.

[nismo_b14]

^^^Isn't OEM 17? Maybe, I could've pulled that out of my arse?
nope they are 16s. i was thinking tc super sevens aka enkei 18s.

[OnURleft]

factory BBS RK's off the last gen camry is a must

[Drummerboy]

Personally, I like these ideas:

http://farm8.staticflickr.com/7034/6808214731_52c8b54d59_b.jpg
http://t2.gstatic.com/images?q=tbn:ANd9GcRKpldUDRlVjOEA5f2IvuKC9hodzk8dS 5eQ64Qy3SdBkPgZp2Md7mN8QjVS

[nismo_b14]

not bad ideas at all, thanks for all insight and thought guys!