DrivenMind
04-04-2005, 05:54 PM
totaled out from the back, p75 ecu
http://www.drivenminds.net/images/Integrawreckside.jpg
includes a jdm p3k (8.8:1 cr) B20 with the rare P8R head (33mm intake valves(same size as "VTEC")), larger ports than p75, pr4 ls heads.
2 sets of heads a pr4 also (polished)
3 intake manifolds: skunk2, 95 ls, giraffe b20
3 sets of cams: 95 pr4, 99 p75, crower 62404's w/ dual valvesprings
(the skunk2, p8r, and crower valvetrain are currently installed)
centerforce dual friction clutch and act prolite flywheel (w/ 7,000 miles on them) and ctr n1 alternator only crank pulley, b&m edge shifter
holley 255lph fuel pump
aem cai
2.5" full xhaust but the last muffler borla xr-1 is totaled out
w/ magnaflow high flow cat(gutted), magnaflow 4" round 16" long muffler, dynomax race bullet resonator, and 4-1 mugen knock-off header w/ stepped primaries and 2.5" collector
newer koyo radiator, brake master cylinder, clutch master cyl, 98 ls 5speed tranny grind-free
comes with a new radiator support, new front bumper(98, never installed)
new black background turn signals
http://www.drivenminds.net/images/IntegraTrunkPartsDMnet.jpg
rotora front slotted rotors, hawk hps front pads
drum 93 civic rear trailing arms and brakes
msd sci-L and high vibe coil, 2step rev limit, adjustable knob rev limit box 6000 rpm to 7800 rpm
http://www.drivenminds.net/images/Harrydyno.jpg
im kepping the rims as they fit on my hachiroku, 14x5" steelies come with it, some barely used bfg ta drags 205/50/14 on dark bronze old accord saw wheels as well, if your no lowballer
http://www.drivenminds.net/images/Integrawreckside.jpg
includes a jdm p3k (8.8:1 cr) B20 with the rare P8R head (33mm intake valves(same size as "VTEC")), larger ports than p75, pr4 ls heads.
2 sets of heads a pr4 also (polished)
3 intake manifolds: skunk2, 95 ls, giraffe b20
3 sets of cams: 95 pr4, 99 p75, crower 62404's w/ dual valvesprings
(the skunk2, p8r, and crower valvetrain are currently installed)
centerforce dual friction clutch and act prolite flywheel (w/ 7,000 miles on them) and ctr n1 alternator only crank pulley, b&m edge shifter
holley 255lph fuel pump
aem cai
2.5" full xhaust but the last muffler borla xr-1 is totaled out
w/ magnaflow high flow cat(gutted), magnaflow 4" round 16" long muffler, dynomax race bullet resonator, and 4-1 mugen knock-off header w/ stepped primaries and 2.5" collector
newer koyo radiator, brake master cylinder, clutch master cyl, 98 ls 5speed tranny grind-free
comes with a new radiator support, new front bumper(98, never installed)
new black background turn signals
http://www.drivenminds.net/images/IntegraTrunkPartsDMnet.jpg
rotora front slotted rotors, hawk hps front pads
drum 93 civic rear trailing arms and brakes
msd sci-L and high vibe coil, 2step rev limit, adjustable knob rev limit box 6000 rpm to 7800 rpm
http://www.drivenminds.net/images/Harrydyno.jpg
im kepping the rims as they fit on my hachiroku, 14x5" steelies come with it, some barely used bfg ta drags 205/50/14 on dark bronze old accord saw wheels as well, if your no lowballer