PDA

View Full Version : 5x114.3 FS: Staggered 19'' Work Euroline DH Wheels (w/ or w/o 5x112) Adapters



rollininstyle2004
04-30-2012, 12:49 PM
19'' Staggered Work Euroline DH Wheels are for sale. Specs below:

Front: 19x9 et38
Rear: 19x9.5 et45
Finish: Machine Polished Face with High Polished Lips
Bolt Pattern: 5x114.3
Extras: 15mm Motorsport Tech 5x114.3 -> 5x112 adapters. Adapters are both wheelcentric and hubcentric for Work wheels and VW/Audi (57.1mm) center bore. Everything is smooth and accurate, no shakes, shims, wobbles, etc. also all 4 centercaps and fastening screws will be included, I just did not take a picture of all of them
Condition: I am VERY picky about the condition of my wheels. I would rate these around an 8/10. There is the occasional little scratch/scuff here and there, but nothing major. The worst is pictured below and is about a 1/2'' curbage in one of the rear wheels. All in all from more than 6'' away they look perfect, I just want to be up front and honest that there are a few small places of imperfections in the lips.

FULL DISCLOSURE: The rear wheels in this set were on the Passat when it caught fire, there is absolutely nothing wrong with them (if they were 20s I would run them on my A6, but 19s look too small for that body, I really love the look of these wheels). The fire stopped before it got that far back, but I am an honest seller and wanted to mention it. The front wheels that were on the Passat were destroyed, thus the two front wheels I am selling are NOT the ones that were on the car. They are different wheels I picked up recently to complete the set. All of the pictures I am going to post of the car show the old wheels which were (19x8.5 et42+adapter) so these wheels are going to be 10mm more aggressive in the front than the pictures show. Honestly, I had always wished I went a little more aggressive in the front anyway with the adapter so in my opinion I think these would sit perfectly on the B5/B5.5 body for those looking for an aggressive stance.

Wheels Price: $1500
Adapters Price: $250 for all 4 adapters, 20 lugs to attach to car, and 20 nuts to mount wheels (was over $425 new)

Wheels and Adapters:$1700 Picked Up

Price is negotiable within reason, do not lowball me, I am not looking for trades unless you have any C6 A6 4.2 Parts.

Pictures:

http://i140.photobucket.com/albums/r34/jmriegel/IMG_1025-1.jpg

http://i140.photobucket.com/albums/r34/jmriegel/IMG_1026.jpg

http://i140.photobucket.com/albums/r34/jmriegel/IMG_1027.jpg

http://i140.photobucket.com/albums/r34/jmriegel/IMG_1028.jpg

http://i140.photobucket.com/albums/r34/jmriegel/IMG_1029.jpg

This is the worst damage, as you can see it is very small compared to the Blackberry:
http://i140.photobucket.com/albums/r34/jmriegel/IMG_1030.jpg

Other little nicks here and there, on the same wheel as above:
http://i140.photobucket.com/albums/r34/jmriegel/IMG_1031.jpg

Adapters:

http://i140.photobucket.com/albums/r34/jmriegel/IMG_1046.jpg

Pictures on the car (remember, the front wheels FS will be 10mm more aggressive than in these pictures, perfect for a mild poke all around)

http://i49.photobucket.com/albums/f279/CarbonGS/2008/12-31-08%20Jordan%20Shoot/12310824copy.jpg

http://i49.photobucket.com/albums/f279/CarbonGS/2008/12-31-08%20Jordan%20Shoot/123108139copy.jpg

http://i49.photobucket.com/albums/f279/CarbonGS/2008/12-31-08%20Jordan%20Shoot/12310810copy.jpg

http://i49.photobucket.com/albums/f279/CarbonGS/2008/12-31-08%20Jordan%20Shoot/12310862copy.jpg

http://i49.photobucket.com/albums/f279/CarbonGS/2008/12-31-08%20Jordan%20Shoot/12310869copy.jpg

I will check this thread as often as I can, please post here AND PM me with any questions or interest in the wheels.

Jordan

Andrewl125
04-30-2012, 04:26 PM
PMed

civic-h22
04-30-2012, 06:51 PM
This is my favorite rim!! I wish I had some money...

Bump...

MistaCee
05-01-2012, 12:14 PM
Sick wheels I might be Interested after this weekend

str8lucky
05-17-2012, 04:39 PM
sent you a pm

rollininstyle2004
05-18-2012, 03:25 PM
Pending Sale to Andrewl125