PDA

View Full Version : SR20 GT2860RS oil drip / gasket question



revsk8erdude
04-15-2012, 03:48 PM
93 240sx with a sr20 blacktop swap. turbo is a garrett gt2860rs and is dripping oil somewhere. pulled off the lower oil return line going from the bottom of the turbo back to the block and saw this \/

http://i120.photobucket.com/albums/o177/revsk8erdude/oilreturn.jpg

shouldent there be more of a gasket than this?

I cant track down whats causing the oil drip so i am going to replace the factory bent metal oil feed/return lines with braided stainless steel hoses.

could anyone tell me what size hoses i need and what the correct sizes/trims are for the gasket i need to order?

green91
04-15-2012, 07:14 PM
Yes theres a gasket that goes between the turbo and the outlet flange. its usually a thin paperish gasket.

IDK what the line sizes are, i've used the ISIS oil line kits in the past with no problems on my SRs.

http://www.enjukuracing.com/products/*ISIS-S14-SR20DET-Turbo-Lines-%252d-Bottom-Mount-.html


You can see the gasket in this pic:
http://www.enjukuracing.com/products/*ISIS-GT-Series-Turbo-Oil-Drain-Flange.html

That drain flange has no real advantage over your stock one though.

revsk8erdude
04-16-2012, 07:32 AM
I appreciate it, I ordered a gasket from Z1, hopefully it will get here relitaviy soon.