View Full Version : 91 NSX CLUTCH
Broker11
03-28-2012, 03:28 PM
TRANSMISSION IS READY TO COME OUT BUT ITS STUCK AND IT SPRINGS ITSELF BACK INTO PLACE WE CANT GET IT OUT CAN SOMEONE HELP
EmminoDaGreat
03-28-2012, 03:48 PM
Pull type clutch, either unbolt the pressure plate or unclip the fork
Similar to an S2k clutch if you have done one
Broker11
03-28-2012, 04:28 PM
I CANT GET TO THE PRESSURE PLATE BUT HOW DO WE UNCLIP THE FORK? ITS STUCK
aaronfelipe
03-28-2012, 05:47 PM
Try taking the caps off, it may help with the loosening of the clip.
EmminoDaGreat
03-28-2012, 11:47 PM
If you cant figure out how to unclip a release fork, you probably shouldn't be doing an NSX clutch.
Broker11
03-29-2012, 10:13 AM
Got it it was stuck but we got it thanks anyways its really in an tight spot with about 3 inches from the subframe you can bearley get your hand in there or even see inside very tight but its off and also the fork would'nt even move I had to pry it out. by the way "Emmino da great" not everyone has had the pleasure of working on an NSX very few people have touched them they are not your average accord or civic. But thanks for the tip!!
Broker11
03-29-2012, 10:56 AM
Got it thanks anyways
EmminoDaGreat
03-29-2012, 02:05 PM
Good work!
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.