View Full Version : Intake mani shooting flame
Go_Fast
03-17-2012, 06:17 PM
I just installed a b20 in my gsr and it wont start. When I try to start it it makes a popping noise and shoots a blue flame out of the manifold (where the egr hose would connect). I know I have spark and fuel pressure. I think my vacuum is good, it should atleast be enough to turn over. I also had this same exact problem when I installed a b18 in the car a couple months ago. I thought the timing was the issue so I switched motors. Now im having the same problem. Ive also checked my grounds a million times and added extra ground wire but still nothing. Any ideas?
1civic
03-17-2012, 08:17 PM
It's wiring then, if you used the same engine harness, then junk it... Or I'd check CYP Circut in that harness, for some reason the dizzy if firing out of order...
BUT for good measures also Check and double check the timing, including the firing order on the plug wires, and the order on the injector wires..
Go_Fast
03-18-2012, 08:44 AM
It's wiring then, if you used the same engine harness, then junk it... Or I'd check CYP Circut in that harness, for some reason the dizzy if firing out of order...
BUT for good mIeasures also Check and double check the timing, including the firing order on the plug wires, and the order on the injector wires..
will do thanks for the help
Go_Fast
03-18-2012, 08:45 AM
Anyone have an obd1 ls or gsr engine harness for sale?
EmminoDaGreat
03-18-2012, 09:59 AM
how about firing order on dizzy
blown_ss
03-18-2012, 12:22 PM
Or the timing belt. It could be off a tooth.
Go_Fast
03-19-2012, 03:45 PM
how about firing order on dizzy
firing order is 4-2-1-3?
im not sure if thats what it is or if that how i have it set up i gotta check later
Or the timing belt. It could be off a tooth.
i think the timing is good the arrows and everything seem to line up perfectly but i'll keep it in mind
thanks for the help guys
silversol
03-19-2012, 04:23 PM
The firing order is 1-3-4-2
blown_ss
03-20-2012, 02:53 PM
The firing order is 1-3-4-2
This man doesn't lie
Go_Fast
03-20-2012, 05:45 PM
The firing order is 1-3-4-2
This man doesn't lie
im not sure what its set at right now ill check today
WhiteAccord
03-20-2012, 06:48 PM
Sounds like welds on your manifold blew
Go_Fast
03-21-2012, 08:46 PM
Sounds like welds on your manifold blew
i dont see any cracks on the manifold. where specifically would i look for a blown weld? and how would that happen?
also the firing order has been 1-3-4-2 the whole time
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.