View Full Version : Handling Mods good wheels fitment for a rsx
Eg4LiFe
03-05-2012, 10:11 PM
ok i wanna know what kind of wheel sizes will fit a rsx good? meaning no rubbing or not too much in, i want it to just flush with the fender. I dont want any crazy cambering stuff too, just a nice fitment. thanks
jadakid88
03-06-2012, 07:08 PM
16/17 x 8 34-38 offset
PTCDC5
03-06-2012, 10:45 PM
17" diameter, 7.5-8" width, +28-32 offset.
Check out the fitment thread on CRSX in the suspension subforum. Lots of pictures and fitment info.
Eg4LiFe
03-07-2012, 06:53 AM
17" diameter, 7.5-8" width, +28-32 offset.
Check out the fitment thread on CRSX in the suspension subforum. Lots of pictures and fitment info.
Give me the link
Nerdsrock22
03-07-2012, 09:18 AM
Here's 17x8 +30 with 225/45.
http://farm8.staticflickr.com/7034/6706032021_e2412d2703_z.jpg
The only thing I've done is roll the rear fenders. Any more aggressive than that and you are going to need some more work.
But honestly, it all depends on how low you are.
firby911
03-07-2012, 04:42 PM
17x9 +20-30 offset
Nerdsrock22
03-08-2012, 09:05 AM
17x9 +20-30 offset
That's going to require a good bit of camber adjustment and rolled fenders.
firby911
03-08-2012, 10:19 AM
That's going to require a good bit of camber adjustment and rolled fenders.
Probably,might be too aggressive for op but it will look damn good.
Op take a look here,your welcome
http://www.rimtuck.com/search/thumbnails&make=Acura&model=RSX&
Dylan
03-23-2012, 09:27 PM
I'm rolling 17x9 +24 :dunno:....17x8 +35 will fit perfectly flush without rolling, tucking, cambering :goodjob:
Nerdsrock22
03-24-2012, 07:03 AM
I'm rolling 17x9 +24 :dunno:....17x8 +35 will fit perfectly flush without rolling, tucking, cambering :goodjob:
waaaaat?? you going to be at the car wash today?
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.