good wheels fitment for a rsx

[Eg4LiFe]

ok i wanna know what kind of wheel sizes will fit a rsx good? meaning no rubbing or not too much in, i want it to just flush with the fender. I dont want any crazy cambering stuff too, just a nice fitment. thanks

[jadakid88]

16/17 x 8 34-38 offset

[PTCDC5]

17" diameter, 7.5-8" width, +28-32 offset.

Check out the fitment thread on CRSX in the suspension subforum. Lots of pictures and fitment info.

[Eg4LiFe]

17" diameter, 7.5-8" width, +28-32 offset.

Check out the fitment thread on CRSX in the suspension subforum. Lots of pictures and fitment info.

Give me the link

[Nerdsrock22]

Here's 17x8 +30 with 225/45.

http://farm8.staticflickr.com/7034/6706032021_e2412d2703_z.jpg

The only thing I've done is roll the rear fenders. Any more aggressive than that and you are going to need some more work.

But honestly, it all depends on how low you are.

[firby911]

17x9 +20-30 offset

[Nerdsrock22]

17x9 +20-30 offset

That's going to require a good bit of camber adjustment and rolled fenders.

[firby911]

That's going to require a good bit of camber adjustment and rolled fenders.

Probably,might be too aggressive for op but it will look damn good.


Op take a look here,your welcome
http://www.rimtuck.com/search/thumbnails&make=Acura&model=RSX&

[Dylan]

I'm rolling 17x9 +24 :dunno:....17x8 +35 will fit perfectly flush without rolling, tucking, cambering :goodjob:

[Nerdsrock22]

I'm rolling 17x9 +24 :dunno:....17x8 +35 will fit perfectly flush without rolling, tucking, cambering :goodjob:

waaaaat?? you going to be at the car wash today?