FS b series turbo setup, name brand parts- precision, siemens, lht, tial KEEP A/C !

[Jason913]

I ran this setup for less than a month, made 305whp/253wtq on a mustang dyno at 20 psi (i can provide dyno vid/sheet). I had ice cold a/c the entire time. It is also p/s friendly, although i didn't run it.


I will part the manifold, downpipe, turbo, dump tube... but nothing else at this time.

Comes with:

t3 lht log manifold
t3/t4 .57 trim precision turbo .63 exhaust w/ air filter
tial 38mm wg w/ 7.5psi spring (i have other springs if you want)
siemens deka 630cc injectors
stainless oil feed line -3an
oil return line -10an
3" downpipe and custom test pipe that bolts up to ek exhausts
dumptube
I can include a gsr oil pan with bung for return line and precision intercooler and some piping if you want to buy those as well.
Buyer can also have all gaskets.
Doesn't come with the bov.

Turbo needs new oil seals. I forgot to run an oil restrictor the first week I had it. It makes full boost np though. NO SHAFT play or wheel damage whatsoever, just needs oil seals.


Here's some pics:

http://img.photobucket.com/albums/v615/Jason913/2011-11-16_20-30-38_164.jpg
http://img.photobucket.com/albums/v615/Jason913/2011-09-19_17-12-21_900.jpg
http://img.photobucket.com/albums/v615/Jason913/2011-09-19_00-45-28_730.jpg
http://img.photobucket.com/albums/v615/Jason913/2011-09-15_17-46-27_129.jpg
http://img.photobucket.com/albums/v615/Jason913/2011-09-15_17-46-22_402.jpg
http://img.photobucket.com/albums/v615/Jason913/2011-09-26_23-35-27_40.jpg
http://img.photobucket.com/albums/v615/Jason913/2011-12-20_18-21-45_332.jpg

Shows a/c:
http://img.photobucket.com/albums/v615/Jason913/2011-09-26_23-34-53_245.jpg
http://img.photobucket.com/albums/v615/Jason913/2011-09-26_23-34-43_131.jpg



$1050 shipped obo or $975 picked up from tallahassee.

I am paypal verified and have 195+ feedback on ebay, and 150+ feedback on other forums. Buyer will not be disappointed. PM me for my phone number.
Thanks!

[quickdodge®]

I will part the manifold, downpipe, turbo, dump tube...

Post prices. Later, QD.

[DarKStaR]

^they are at bottom of post under pics

[quickdodge®]

^they are at bottom of post under pics

I was referring to the "part out" prices, sir. Later, QD.

[DarKStaR]

whoops, sorry didnt see the part out part.

[Munky]

pmed

[Jason913]

I will now part if offers are reasonable. PM me

[project_EM1]

If you still have this after taxes I might try to get it. Keep me updated. Pm lowest you'll take shipped. Thanks.

Bump for a nice kit.

[Jason913]

Part out pricing (shipping not included):

turbo- $225
manifold- $250
dp- $150 or $175 w/ tp
test pipe- $50
injectors (no resistor box needed, they're high imp.)- $200
precision 350hp intercooler- $150 w/ piping for ek/dc $200
tial 38mm wastegate- $160 w/ whichever spring you want that I have.
dumptube- $30
gsr oil pan w/ bung welded in- $65

[docheg6]

any trades i have a greddy kit on my ek only thing i dislike is my internal wastegate

[Jason913]

will trade for a semi-built b series head, nice intercooler or slicks. otherwise, just cash. thanks guys!

[Jason913]

turbo, dp, dt, mani, wg sold