MY LS MESHIES PROJECT AND LS SNOWFLAKES!!!!

[JDM_p00ky]

PPLS.. alot of ppl didnt believed when i said... i can make sum ugly ls meshies look hella good.. well.. i took it like a challenge... not just by polishing the face like sum other ppl do to their wheels i decided to go the extra mile even if it takes longer.. so HAND POLISHED!!!!!! the whole thing... here are some pics to prove it =]

http://i294.photobucket.com/albums/mm116/jdmkiid/2011-10-01153210.jpg
http://i294.photobucket.com/albums/mm116/jdmkiid/2011-10-01153120.jpg
http://i294.photobucket.com/albums/mm116/jdmkiid/2011-10-01153152.jpg
http://i294.photobucket.com/albums/mm116/jdmkiid/2011-10-16225239.jpg
http://i294.photobucket.com/albums/mm116/jdmkiid/2011-10-16225329.jpg
http://i294.photobucket.com/albums/mm116/jdmkiid/2011-11-01192016.jpg
http://i294.photobucket.com/albums/mm116/jdmkiid/2011-11-01192318.jpg
http://i294.photobucket.com/albums/mm116/jdmkiid/2011-11-012031341.jpg
http://i294.photobucket.com/albums/mm116/jdmkiid/375820_1578508199734_1746532995_796441_2142688196_ n.jpg
http://i294.photobucket.com/albums/mm116/jdmkiid/389908_1578588241735_1746532995_796518_2147086004_ n.jpg

but then after!!!! my boy wanted me to polish th face to his snowflakes.... and so.... i did.... =]

http://i294.photobucket.com/albums/mm116/jdmkiid/387823_1686997111889_1746532995_838392_1718818287_ n.jpg
http://i294.photobucket.com/albums/mm116/jdmkiid/388877_1687106394621_1746532995_838440_1344130587_ n.jpg
http://i294.photobucket.com/albums/mm116/jdmkiid/384989_1697787221635_1746532995_843964_21753246_n. jpg
http://i294.photobucket.com/albums/mm116/jdmkiid/396959_1697797981904_1746532995_843967_1553248532_ n.jpg

[Boosting EG]

damn those look SICK

[Munky]

what was your process? i would love to do this to my meshies!!

Props

[Potter]

You should take some pictures of them on a car, well done

[JDM_p00ky]

tytytyty everyone.....
@potter... car is still work in progress.. but will do!
@munky... you need 400 grip sand paper.. 800 grip.. 2000 grip finishing lots of water.. lots of time.. gloves so you fingers wont peal as bad
and lots of patienceeee.. and ofcourse some very understading parents to let you do what you want in your garage lol

[Sammich]

son of a bitch!!!!!!!! i did my fat fives and love em..but i couldnt imagine doing meshies

[allmotor-teg]

tytytyty everyone.....
@potter... car is still work in progress.. but will do!
@munky... you need 400 grip sand paper.. 800 grip.. 2000 grip finishing lots of water.. lots of time.. gloves so you fingers wont peal as bad
and lots of patienceeee.. and ofcourse some very understading parents to let you do what you want in your garage lol



GREAT JOB i have done this myself so let me translate;

you need 400 grip sand paper.. 800 grip.. 2000 grip finishing lots of water.. LOADS OF FUCKING TIME.. MUST HAVE gloves if you want to have fingers afterwards
and BUY LOADS LOADS LOADS OF PATIENCE.. and ofcourse some very understading parents to let you do what you want in your garage lol[/QUOTE]

[Munky]

Whahahaha "understanding parents" I wish I had those on my side, I always get the "why do you waste all your time on stupid cars". They just don't understand our passions

GREAT JOB ONCE AGAIN!!!!

[JDM_p00ky]

@sammich.. believe meeeee meshies are not easyyyyyy lol it took me weeks for one wheels i need one more to finish all 4 im half way done with the last one but i been doing other wheels besides mine for my friend

@allmotor-teg lmfaoooo thanks for the translate.. actually ur way sounds exactly what i went thru lmfaoooo but thanks it was worth it

@munky my parents support me in ever sumb shit i get myself into.. once my mom and dad told me.. well we support no matter what even if you become a bank robber but you better be the best damn bank robber lmfaooo my parents are cool but my dad sometimes keeps bugging me to just clean the garage since my 2 cars are the ones inside lol

[big mac]

Finish the meshes and sell em to me

[Munky]

@JDM_p00ky hahaha trust me my parents hate my hording habits lol. i have parts EVERYWHERE!!! and my dad and mom support me but say just dont get any tickets or all my stuff is getting trashed haha....and lets not get into the garage situation, i have three cars, both take up the garage and one is in the drive way luckily i have a drive way that fits four cars easily :rofl:

[JDM_p00ky]

@big mac i was planning to trade them but we will see in the near future once im done with the last one which should be this weekend

@munky lmfao i know man its good to have some good parents on your side and well about me and the getting ticket situation... i have a suspended license so my parents prohibited me from driving since last time i got caught driving they just told me to stop racing but i can do what i want with cars

OH AND I FORGOT TO MENTION!! im polishing my d16z6 valve cover too!! i will post a pic once im done with it

[jonbuice5591]

very nicely done. i honestly didnt think meshies would look good ever. lol

[JDM_p00ky]

my friends said the same thing lol

[Sammich]

GREAT JOB i have done this myself so let me translate;

you need 400 grip sand paper.. 800 grip.. 2000 grip finishing lots of water.. LOADS OF FUCKING TIME.. MUST HAVE gloves if you want to have fingers afterwards
and BUY LOADS LOADS LOADS OF PATIENCE.. and ofcourse some very understading parents to let you do what you want in your garage lol[/QUOTE]

it's grit, not grip LOLOL also...when i did mine i only went to 800 and worked my way up and mine came out fantastic...you go w/ lower grit if you care to remove some gashes on the lip pretty much, i had some gashes, but they werent that bad to where it'd make me go that low of a grit.

[Boosting EG]

sick

[allmotor-teg]

it's grit, not grip LOLOL also...when i did mine i only went to 800 and worked my way up and mine came out fantastic...you go w/ lower grit if you care to remove some gashes on the lip pretty much, i had some gashes, but they werent that bad to where it'd make me go that low of a grit.[/QUOTE]

thats what i was trying to say just a typo but its a PITA!!!


@allmotor-teg lmfaoooo thanks for the translate.. actually ur way sounds exactly what i went thru lmfaoooo but thanks it was worth it

i know when you are done and see how nice they look you will feel good about your hrs of work, the water, money, sand paper and your fingers or whats left of them lol.

[JDM_p00ky]

not really money.. all i spent was no more than 11 dollars since my uncle works for a body shop he gives me all the sand paper i need and one of my friends hooked me up with more sand paper and mothers polish

[allmotor-teg]

not really money.. all i spent was no more than 11 dollars since my uncle works for a body shop he gives me all the sand paper i need and one of my friends hooked me up with more sand paper and mothers polish


it was pretty much free but just the time you spend do it is ALOT! btw im going to polish my blades.

[GlennsEK]

Looks great I'm going to start the same process on my VC tonight, any pictures of the d16 VC?

[allmotor-teg]

Looks great I'm going to start the same process on my VC tonight, any pictures of the d16 VC?

i did it on my dohc valve cover and it looked great, you will need loads of patience.

[JDM_p00ky]

yes i will post the d16 vc once im done wit it... because im doin my friends bike wheels he got a black bike and wit polished wheels will be cooked crack... on the valve cover.... is gun be a lil hard i always start the places and edges where i know is going to be hard

[JDM_p00ky]

my friend wanted me to help him polish his blades he never came thru with it

[jdm_eg8]

LS Meshies look sick bro

[JDM_p00ky]

thanks

[JDM_p00ky]

i have this motorcycle wheels im doing i can post them here in the wheels thread right?

[JDM_p00ky]

glennsek i will post sum pics of the VC tomorrow promise =]

[sun2ner]

@JDMp00ky wa sup it BULLET i knew i reconised them meshes

[JDM_p00ky]

wattup partna you know it im going to see if i can polish some fat 5's next