Log in

View Full Version : obd2a harnesses, pro series valve train, Itr Lca's, Tokico springs, h22 head



Starrfire
01-09-2012, 11:46 PM
Well here is some of the stuff I'm trying to get rid of. I'm open to possible trades, but if it came from ebay and has no name don't waste my time. Pm me for best response. My location is just outside of Rome and I'll meet according to your location.

First item is an obd2a manual civic dx harness(d16y7) SOLD!!!


Second item is an obd2a civic automatic ex harness(d16y8)(vtec)SOLD!!!


The next item is a set of 4 door integra power mirrors. they are a little rough but work. One of the shells has a little crack in it. $20
http://i252.photobucket.com/albums/hh30/Starrfire86/forsalethread035.jpg

Next up is a set of ITR Lower control arms. SOLD

The next item for sale is an h22 head with some problems. It was over revved and smacked some valves into the pistons. There are some bent valves and shattered valve guides. None of the seats are messed up. It has all the cam caps and oil rails
[COLOR=#00ff00]$40
http://i252.photobucket.com/albums/hh30/Starrfire86/forsalethread037.jpg
[/SIZE]
Next item is a set of Tokico lowering springs for a 92-95 civic or a 94-01 integra. 1.5" drop #5049 $100
http://i252.photobucket.com/albums/hh30/Starrfire86/forsalethread045.jpg

Next item is a set of Skunk2 pro series titanium valvesprings and retainers.for a vtec B They have have 8000 miles on them. SOLD!!!


Next item is a Chikara header for a b18c(fits other b's obviously) $100
http://i252.photobucket.com/albums/hh30/Starrfire86/forsalethread042.jpg
http://i252.photobucket.com/albums/hh30/Starrfire86/forsalethread043.jpg

Next part for sale is an h22 valve cover. The cam gear cover is cut off . $20
http://i252.photobucket.com/albums/hh30/Starrfire86/forsalethread041.jpg

I have some eg8 (92-95 civic 4 door) factory corner lens. One has a small crack in it. $10
http://i252.photobucket.com/albums/hh30/Starrfire86/forsalethread039.jpg

Next is a good power steering pump off a Civic type R engine. The pulley is slightly warped but the pump works fine.SOLD

NoWAyItZTOMmY
01-10-2012, 04:01 AM
I'm guessing the VT is for a B?

Starrfire
01-10-2012, 07:04 AM
Yep, vtec B

Boosting EG
01-10-2012, 08:06 AM
nice stuff

Starrfire
01-10-2012, 03:03 PM
TTT

lshatch1023
01-11-2012, 02:29 AM
Bump for u sir

Starrfire
01-11-2012, 12:10 PM
Bump for me

allmotor-teg
01-11-2012, 01:05 PM
good luck with sales!

1MP0RTL0V3R
01-12-2012, 01:05 AM
PM me the lowest for the y8 harness and were are you located?

Starrfire
01-12-2012, 06:35 PM
TTT

Starrfire
01-13-2012, 03:14 PM
TTT

YoItsCarlie
01-13-2012, 05:08 PM
i would like the manual dx harnesss.. 4784222604

Starrfire
01-14-2012, 06:42 PM
TTT

Starrfire
01-15-2012, 09:31 PM
ttt

JDBenson
01-16-2012, 12:09 AM
Bump for the skunk2 valve train!

Starrfire
01-16-2012, 08:20 PM
TTT

Drummerboy
01-16-2012, 11:59 PM
I may pick up the h22 head in a week or so. gotta figure out if I want to start another motor project.

Starrfire
01-17-2012, 07:23 PM
TTT

Starrfire
01-18-2012, 07:53 PM
TTT

Starrfire
01-19-2012, 03:10 PM
TTT

Starrfire
01-22-2012, 08:12 PM
TTT

SyNS2KEX
01-24-2012, 11:20 PM
i need the auto harness. please pm me a phone #

Starrfire
01-25-2012, 08:32 PM
bump

Starrfire
01-26-2012, 09:28 PM
TTT

Starrfire
01-27-2012, 03:05 PM
TTT

Jdm94Coupe
01-27-2012, 03:55 PM
Ill trade u a chipped phearable p28 ecu for the lowering springs, lmk

Starrfire
01-27-2012, 08:42 PM
I can do that. It's not cooked right? What do you want to do about swapping it?

Jdm94Coupe
01-27-2012, 09:26 PM
I can do that. It's not cooked right? What do you want to do about swapping it?

Ill hit u up on fbook

Starrfire
01-30-2012, 06:17 AM
TTT

Starrfire
01-31-2012, 07:24 PM
UP

ducky1177
02-01-2012, 02:25 PM
up up up

Starrfire
02-11-2012, 11:32 PM
UP

Starrfire
02-17-2012, 12:07 PM
TTT

Starrfire
02-17-2012, 11:29 PM
UP

Starrfire
02-24-2012, 11:54 PM
Bump

Starrfire
02-26-2012, 05:55 PM
EX harness sold!!!

Starrfire
02-27-2012, 10:17 PM
TTT

Starrfire
02-29-2012, 12:33 PM
up