Did somework to the da finally

[nismo1987]

So i got bored wit the gsr blades and went got some mesh and also lower car some more getting paint soon




http://img.tapatalk.com/d0362cbb-6af8-6be8.jpg
This is when i first got car two months ago......

http://img.tapatalk.com/d0362cbb-6b96-6185.jpg
This is when i got some blades in a trade

http://img.tapatalk.com/d0362cbb-6c24-d474.jpg
This when i took blades off put em in storage and put mesh on

http://img.tapatalk.com/d0362cbb-6c70-9c69.jpg

http://img.tapatalk.com/d0362cbb-6c90-6e59.jpghttp://img.tapatalk.com/d0362cbb-6cb2-ecee.jpg



Sent from my SGH-T759 using Tapatalk

[nismo1987]

I think mesh look better

Sent from my SGH-T759 using Tapatalk

[Catnip]

Looks like you were lowering it with being low in mind, not a good stance (read: the way it sits, not the fad).

I love DAs, stick with her!

[JDMJ]

^ in the same boat. Its a little low for me.

[silverDA]

rake.

[Sol-Badguy]

Either raise up the back, or lower the front to match. Preferably the first, it'd be hard to even drive if you matched the front.

It looks pretty ridiculous that way.

[Crazydelsol]

^^ feel the same way!

[Bacon]

The blades look better.

[StarBwoy]

I LIKE IT BRO

[Black4DrEK]

Gotta start somewhere.....

Raise the rear up

[nismo1987]

Its not lower that driver front tire is a 45 series rest of em 55 and bk Is even wit the front

Sent from my SGH-T759 using Tapatalk

[Drummerboy]

Raise the rear, regardless. I mean, get matching tires, but that reverse rake looks pretty bad. Not a bad looking car, really, just a bad stance.

[RL...]

tucking tire like that looks bad

[quickdodge®]

Raise the rear, regardless. I mean, get matching tires, but that reverse rake looks pretty bad. Not a bad looking car, really, just a bad stance.

Not raise the rear. Lower the front to match.


tucking tire like that looks bad

It only looks bad because the tire sidewall is too tall for that amount of lowering. If that were a shorter sidewall, it wouldn't look so bad. Later, QD.

[nismo1987]

Thanks for lookin but that's how i had all my cars low as Hell even old school

Sent from my SGH-T759 using Tapatalk

[quickdodge®]

Thanks for lookin but that's how i had all my cars low as Hell even old school


Huh? Later, QD.

[DC2NR]

boat stance ftl.

[metalmatt47]

Um... the stance is funky... Did you cut/heat the springs?

[nismo1987]

na they skunk 2 coilovers i forgot which ones but I just realize these pics are before adjust the driver side because i was done and drove it i seen it was uneven and i fix it but it still need adjust it more far as driver and passenger............. and i like the 55 or 50 series better for that size rim....

[Sinfix_15]

So i got bored wit the gsr blades and went got some mesh and also lower car some more getting paint soon




http://img.tapatalk.com/d0362cbb-6af8-6be8.jpg
This is when i first got car two months ago......

http://img.tapatalk.com/d0362cbb-6b96-6185.jpg
This is when i got some blades in a trade

http://img.tapatalk.com/d0362cbb-6c24-d474.jpg
This when i took blades off put em in storage and put mesh on

http://img.tapatalk.com/d0362cbb-6c70-9c69.jpg

http://img.tapatalk.com/d0362cbb-6c90-6e59.jpghttp://img.tapatalk.com/d0362cbb-6cb2-ecee.jpg



Sent from my SGH-T759 using Tapatalk

why do you want more wheel gap in the front than in the rear? rear camber looks absolutely fucking ridiculous. raise the rear up to match the front and get rid of that awful camber. Mesh wheels were an improvement.

[Genji-Sama]

You need spacers in the rear, badly. And my vote goes for lowering the front, but good choice on ditchin the blades :goodjob: Is it satin black on purpose or are you spraying it soon?

[nismo1987]

You need spacers in the rear, badly. And my vote goes for lowering the front, but good choice on ditchin the blades :goodjob: Is it satin black on purpose or are you spraying it soon?

Na they not satin black that's how i got em guy said he wasn't trying spray em either and am not trying spray em and front coilover is at its lowest its that driver tire Its different size than bk that driver tire is a 45 and rest is 55

Sent from my SGH-T759 using Tapatalk

[nismo1987]

http://img.tapatalk.com/d0362cbb-52a6-63ea.jpg
This is from the passenger side.... Where all the tires same size.... This side still need adjusting but not as bad as driver bk

Sent from my SGH-T759 using Tapatalk

[SOHC97]

looks good man. my da sits the same way(back looks lower than front) i might have to adjust my rear coilovers to suit

[nismo1987]

looks good man. my da sits the same way(back looks lower than front) i might have to adjust my rear coilovers to suit
HELL YA I KNOW WHAT U MEAN

[Captain-Obvious™]

In my experience DA's always sit lower in the back than the front. I'm pretty sure you can swap out the front suspension forks from a different Honda that are smaller. And that will allow the car to go lower.

[Genji-Sama]

Na they not satin black that's how i got em guy said he wasn't trying spray em either and am not trying spray em and front coilover is at its lowest its that driver tire Its different size than bk that driver tire is a 45 and rest is 55

Lol, wasn't really clear from my statement, but i meant was the car, itself, satin black on purpose :goodjob:

[nismo1987]

Lol, wasn't really clear from my statement, but i meant was the car, itself, satin black on purpose :goodjob:

Oh ok my bad but na i got car like that hoping to get it respray bk to oem burgundy color

[nismo1987]

In my experience DA's always sit lower in the back than the front. I'm pretty sure you can swap out the front suspension forks from a different Honda that are smaller. And that will allow the car to go lower.

I was thinking that but i also was thinking trying a different brand of coilovers am running skunk 2 right now

[StarBwoy]

you need a bra pm bro 90 bucks oem

[Genji-Sama]

you need a bra pm bro 90 bucks oem


Hoping to get it respray bk to oem burgundy color

Agreed x2 :goodjob:

[StarBwoy]

what he said ^:boobies:

[Z0_o6]

looks the way i expect a flat black DA to look...