PDA

View Full Version : B16 Cable Trans ???


DA9_Vito
11-30-2011, 02:03 AM
If i put a b16 cable trans on my car do i have to change my clutch or are the splines the same? I have a b18A1. And is it really worth it.
dc2gs
11-30-2011, 09:04 AM
The tranny will bolt right in. Are you planning on dd or track? Gears are shorter than the ones in the ls trans. You will benefit from the shorter gears but idk if you want it in a dd.
DA9_Vito
11-30-2011, 02:20 PM
The tranny will bolt right in. Are you planning on dd or track? Gears are shorter than the ones in the ls trans. You will benefit from the shorter gears but idk if you want it in a dd.



Ive been told i can put the LS 5th gear in for gas milage. And just keep everything else b16 gears. If i did keep the b16 5th gear what kinda rpm in 5th would i be around. the LS runs around 2500rpm at 65mph
dc2gs
11-30-2011, 03:47 PM
If i remember correct its about 3500 or 4000 at around 65mph. I would personally just put an ls 5th gear in it.
Starrfire
11-30-2011, 07:29 PM
It depends on what trans you have now. If it is a 92-93 integra ys1 trans it has a larger spline which is the same as a 94-01 trans. Just count the splines.
DA9_Vito
12-02-2011, 06:01 PM
If i remember correct its about 3500 or 4000 at around 65mph. I would personally just put an ls 5th gear in it.


It depends on what trans you have now. If it is a 92-93 integra ys1 trans it has a larger spline which is the same as a 94-01 trans. Just count the splines.



yea i looked closer today and its right at 3500rpm at 65mph. and its a 90. the guy says its a b16 SIR cable trans. so i assume its the correct one lol. Thanks for yalls help guys. Reps for both.