Turbo rebuild in Atlanta?

[green91]

Does anyone have personal experience with any turbo re builders in Atlanta? I've always heard there's a diesel shop in Forest Park that does them.. anyone have experience using them? Any places on the North side of Atlanta?

Thanks in advance.

[EmminoDaGreat]

I usually rebuild my own turbos, but turbo diesel etc in forest park does everything

[green91]

it has shaft play and smokes so id like to have a shop rebuild it.

[EmminoDaGreat]

Yea, hit them up, I usually deal with eddie, but they can balance etc...

[green91]

I know its impossible to say without knowing what damage it has, but any idea what they generally run for a rebuild? Its a mitsu td04-15g off d16 greddy kit.

[Jdm94Coupe]

expect to pay between $500-$600. they only do 100% complete rebuilds, and they do 30 day warranties if im not mistaken. they've done 4 turbos for me.....

btw its called turbo diesel and electric.....

[green91]

For that price i can pick up a brand new one!

[Jdm94Coupe]

For that price i can pick up a brand new one!

Yea for cheap turbos it doesn't make sense to go to them. But my turbo was over $1000 new.

[Doppelgänger]

TD&E took care of me when my 2560 CHRA failed. I dealt with JD over there and I will go back there for anything I need.

[green91]

I wish i could find a chra for this and id just swap the housings. Oh well. Still looking for a good replacement

[Patterson]

I called them and told them what my gt3082r was needing (oil leak cold side and fins chipped) and the guy told me min. Of $915 so im looking at precision now lol

[SPOOLIN]

thats because they cant really rebuild a ball bearing cartridge. for that much you can buy a billet turbo.

[Jdm94Coupe]

thats because they cant really rebuild a ball bearing cartridge. for that much you can buy a billet turbo.

Exactly!!! Tell em homie...... he can buy my t67 and pay $500 for them to rebuild it..... get at my patterson.....

[Patterson]

Hey I text you about one and you didn't get back lol i'll hit you up tomorrow

[nsany(atl)]

Z1 Motorsports is a Garrett authorised Rebuilder. They can get a new center section and rebuild it for you.

[iDriftATL]

I've also heard of turbo diesel in forest park...they're well known for what they do...I haven't heard of any other turbo rebuilders in the area.... the others are out of state...like the others say expect to pay at least $500.. we were going to get a turbo rebuilt by them but ended up buying a turbo from precision instead. Good luck!

[RandomGuy]

DUDE
MITSU turbos are stupidly easy to rebuild... Just get some good craftsman snap ring pliers and you can be done in less than 1 hr.

I can get you a rebuild kit for that for like 50 bux shipped from this place in Ohio.

Just gotta take it apart, change out the bearings and o-rings from the kit/etc.

Take your turbine shaft and compressor wheel to Turbo diesel place and they'll balance it for ~50 bux... Take it home mark it really good before your take the compressor wheel off.... reassemble the turbo with the new stuff from the kit.... Line up the compressor wheel with the turbine when you're tightening it back on and its as good as new. I've done this with good results every time. Rarely do you get a case where it's still bad... Worst case, it still smokes, you can just get a new center housing and swap everything over to that and line it up (I think i got a spare if you need)

[Tree]

expect to pay between $500-$600. they only do 100% complete rebuilds, and they do 30 day warranties if im not mistaken. they've done 4 turbos for me.....

btw its called turbo diesel and electric.....
x2. they are on point.

[green91]

RG i think it had a balance issue. I ended up buying a brand new turbo a few months back, but ive still got this one lying around