another SLOW H2B build

[TeamFX_K24a4]

well i would like to share to the community a build i have going on- my last setup was a 84mm b20v on pr03 cams with supertech valvetrain...after 10k miles of abuse/daily driving and 9k revs the retainer decided to fall apart...almost dropping a valve..some said its ok to run pro3s on supertechs/daily/ etc etc... some say dont...well i took a chance.. and learned from my own experience.

new setup going to machine shop monday- hopefully to get her running for IFO.showdown

h22 head
ferrea valves/springs/retainers
mild port/clean
skunk2 pro2 cams
skunk cam gears
special h22 intake
highend header/logic motorsports?
3'' straight pipe
new type s distributor

h23 crank
Mahle Gold 11.5.1
clevite bearings
new Oil pump
kspeed bsm
crower rods
shaved crank pulley h22
manual tbelt tensioner
vibrant timing belt tensioner
oem gaskets of course
balanced bottom end

b16 trans
carbon coated synchros
4.4fd
fidanza fly
act 4pk unsprung
new bearings
obx 2nd gen lsd
h2b qsd kit
dss axles

fuel pump
rc550
e85
neptune

http://i416.photobucket.com/albums/pp250/jpham00/210572_1609872458537_1587990542_1107946_6149059_o-1.jpg
http://i416.photobucket.com/albums/pp250/jpham00/303280_1982472453304_1587990542_1459803_40296699_n .jpg
http://i416.photobucket.com/albums/pp250/jpham00/306403_1997489028709_1587990542_1469175_796080619_ n.jpg
http://i416.photobucket.com/albums/pp250/jpham00/300840_1982470053244_1587990542_1459802_1619682241 _n.jpg
http://i416.photobucket.com/albums/pp250/jpham00/387392_2002339549969_1587990542_1471757_1030441024 _n.jpg
http://i416.photobucket.com/albums/pp250/jpham00/298426_1997485148612_1587990542_1469174_1395823881 _n-1.jpg
http://i416.photobucket.com/albums/pp250/jpham00/286092_10150738612095472_730660471_19970539_264941 1_o.jpg

[Black4DrEK]

Nice Build.:goodjob: Thats the same header Im going to use..

[TeamFX_K24a4]

thanks man- i got really confused... whether logic and highend was the same... im sure they are..

[DarKStaR]

Jeez, everyone going h2b these days ;)

GL with the build, hope you get it done before showdown so we can have more in the field.

[DarKStaR]

thanks man- i got really confused... whether logic and highend was the same... im sure they are..
Yes pretty much the same thing, i plan on running that header in the future but couldnt pass up $50 for my rmf rep lol.

[TeamFX_K24a4]

lol...thanks- darkstar looks like ur motor is already in ... mine is still apart lol... if i dont make it to nov 6.. illl see u at showdown..

[DarKStaR]

yea mine has already started up.....and bottom end half way pulled back apart...and will be put back together tomorrow and started back up lol.

[Black4DrEK]

thanks man- i got really confused... whether logic and highend was the same... im sure they are..

The reason I like this one.. I can still use my Full size Aluminum Radiator! It doesnt stick out as far, like the Kiddracing, or what not... And still makes good power!

[h22 jones]

Kidd racing doesnt hit a full size radiator but i still prefer the logic both nice headers both make power. Im glad to see another h2b project good luck man .

[TeamFX_K24a4]

inspired by h22jones of course :)

[h22 jones]

Good lucking car also man.

[Black4DrEK]

Kidd racing doesnt hit a full size radiator but i still prefer the logic both nice headers both make power. Im glad to see another h2b project good luck man .

In a EG? Maybe in a Teg.. But that Kidd racing comes SUPER close to the core support.. No room for my Full Aluminum. But the Logic is perfect.

[h22 jones]

In a EG? Maybe in a Teg.. But that Kidd racing comes SUPER close to the core support.. No room for my Full Aluminum. But the Logic is perfect.

Good to know i got one on the way .Thats the last thing i needed i was just working a deal for one lol im cheap.

[h22 jones]

Nice Build.:goodjob: Thats the same header Im going to use..

When you building yours?

[Black4DrEK]

Havent started putting the engine together yet. Its kinda on the back burner.. We just had my son, So this particular build has to wait a few.. I still have LOTS H2b parts I have been saving.. Just dont have the Mahle pistons I want, Nor the Head fully built yet..

[*EFilliated*]

Only thing that sucks bout the header is ur gonna have redo the portion that goes under oil pan, if I'm not mistaken. Used a header recently exactly like that and we had to. Other then that looks decent

[DarKStaR]

Why would he have to redo it? Its made for H2B and this is the first ive heard of this from anybody with that header...

[STRteg]

Why would he have to redo it? Its made for H2B and this is the first ive heard of this from anybody with that header...

lol noobs do things differently I suppose

[TeamFX_K24a4]

Only thing that sucks bout the header is ur gonna have redo the portion that goes under oil pan, if I'm not mistaken. Used a header recently exactly like that and we had to. Other then that looks decent

maybe hes talking about the rmf style header? cause this is specifically fitted for h2b.... in my case b2h

[*EFilliated*]

Yea I'm a noob but I've done 3 h2bs and the last one we used a header identical to this one, and had to get the header re-done. If this is the logic header then yes it will fit. If its not the header from logic it won't fit without re-doing it. But suit ur self, just thought ide help out. Since I've done this enough to know



lol noobs do things differently I suppose

[EmminoDaGreat]

what he is probably trying to say is that these headers are prone to be miss-shaped, and may point towards the sky when installed, from what I have seen, or they may sit too low/ hit the oil pan. I think it varys from header batches.

[*EFilliated*]

Finally some1 with some sense. I have shopped for h2b headers and the only one that lines up straight is the logic motorsports header. All the other ones are made for straight h and have to be modified. Well back to the build. No need to ruin the thread


what he is probably trying to say is that these headers are prone to be miss-shaped, and may point towards the sky when installed, from what I have seen, or they may sit too low/ hit the oil pan. I think it varys from header batches.

[h22 jones]

The r was made for a h to h not a h2b so that might be why it doesnt fit right . We sent jasons header to be copied back when mike sent them and it was built for the h to h that made 227hp not for a h2b . Wasnt it 227 james ? Hell its been 6 or 7 years i cant remember all this shit lol.

[jdmkiller]

what did your b20 with pro 3's make, and let me know how that OBX lsd fits in that trans

[EmminoDaGreat]

yes it was that, way back when mike... and his b20 made 218 and the obx fits in the trans fine.

[TeamFX_K24a4]

what did your b20 with pro 3's make, and let me know how that OBX lsd fits in that trans

not enough compression..stock port head...- obx lsd works greattttttt- thanks to msp

[jdm eg6]

any updates?

[TeamFX_K24a4]

should be outta machine shop sometime next week... then clay check p2v clearance....

[h22 jones]

Good deal should be a beast.

[DA9_Vito]

Cant wait to see the end result.

[94ej2]

here you go

[TeamFX_K24a4]

damn pt... beat me to it...! ^^ balanced ,blueprint, stock sleeves -re hone

[Benefit]

H22 w/ b16 trans...this shit is going to fly

[NaNissan]

Coming along nice.

[TeamFX_K24a4]

- update-sold ek chassis..... got man an eg... :))))) along with comp twin disk ;)

[big mac]

Keep up the progress man

[h22 jones]

Keep up the progress man

I have some pro 2s for sale now man hit me up.