My Poked 4 Door Build

[undrgrndrdr1]

UPDATE:::::
Engine Pictures on page 4
New Pics on page 5


16x8 0 offset 205 45 16 neo gens
KYB AGX struts
Coil Overs
SPC rear camber kit
Skunk2 front camber kit
Manual conversion
rear window visors

parts awaiting install
built y8
turbo
type r front lip

Much more to come with engine build pics and update pics when new parts are installed

http://i663.photobucket.com/albums/uu355/slprwgn/IMG_0753.jpg
http://i663.photobucket.com/albums/uu355/slprwgn/IMG_0757.jpg
http://i663.photobucket.com/albums/uu355/slprwgn/IMG_0759.jpg
http://i663.photobucket.com/albums/uu355/slprwgn/IMG_0760.jpg
http://i663.photobucket.com/albums/uu355/slprwgn/IMG_0761.jpg

[firby911]

Get rid of those cut springs and get some nice suspension. The stance looks like shit.

[RBS]

Hondas with such wide wheels awkward unless they are hella slammed

[wanggsticky]

wheels are gross

[cm7k24]

lose the wheels... and get new suspension.

[undrgrndrdr1]

coilovers are coming... decided to spend money on motor first

[jdm eg6]

Get rid of those cut springs and get some nice suspension. The stance looks like shit.

^ what he said

[Austin?]

I hate how your wheel setup

[Bacon]

Maybe if the wheels had +20 or so offset it wouldn't look too bad. Cut springs aren't for everyone but it does the job. I like it.

Sent from my DROIDX using Tapatalk

[apexi957]

How are the Neogens?

[undrgrndrdr1]

i like them... they allow good grip and still have good treadwear... will see what they do with boost though

[Scotsman]

i love it

[03RCode]

Hate it. Too much poke, not enough low.

[Drummerboy]

I'll save judgement until said coilovers are installed. I agree with building the motor before stancing, but I would have kept stock wheels until you had money for coilovers.

[RsonGt3's]

Why do you need camber kits with zero offset just saying

Sent from my PC36100 using Tapatalk

[undrgrndrdr1]

Couldn't pass up deal on the wheels at the time... The car will not be going crazy low because I am not going to run super crazy camber... This is no show queen and will be driven so I would like to get some life out of my tires... This car is a complete budget build and as of now I'm still under 4k in the build and car!

[MeFryRice]

Looks like another Honda.

[Jdm94Coupe]

nice car. i want to turbo a sohc one day!

[CaTcH22]

^^^ :rly: lol

[chris89hatch]

i think since u dont wanna go crazy low or camber u should trade these for something that has a higher offset...... this way it wont look a mexi-stance.. (no offense) ::ninja:: but it doesnt look all that bad.. its a start

[undrgrndrdr1]

The car is going slightly lower to close the gap and I am only gonna as much camber as I have to... Remember that there is no camber kit on the car so the camber is only from lowering the car

Thanks for input guys

[Liltoua]

ugly, do something about it

[silversol]

Where is the "BUILD" you speak off?

[Echonova]

If your camber is coming from lowering the car... You're still gonna have camber and burn through tires and you'll need to roll/pull the fenders to even think about tucking those wheels.


Edit: Deeerrrrr I just saw where you have the camber kit on your soon-to-be "Mod" list.

[Black4DrEK]

Trade those wheels.

[RL...]

car looks mexican'ed out

[DC2NR]

Not bad, just that the 0 offset kills it for me. maybe +20.

[Dylan]

I'm glad that adding a visor gave you enough confidence to present your car to IA.. However, the car looks like its going to be a fad bucket. I'd try higher offset wheels with a little more low, remove visor, add boost, and call it a day.

[Rhys.]

looks sexy... better then the jimmy lol

[undrgrndrdr1]

This car is built for me not for the trends and flavor of the week everyone jumps into...This car is what I like and my views of clean, hate is just compliments to me! ( not saying anyone is hating ) Your right the window visor did set me over the top for confidence lol... I have to get all my pictures of parts since all o have is camera phone and I'm waiting for bearings so it can be built..

[Jdm94Coupe]

Why did u choose to build a sohc? They don't make much power do they?

[undrgrndrdr1]

I have had h22 and ls vtec.... This is a complete budget build and experiment to see what the auto tranny can really take power wise... This being said I know te discussion is gonna go south on the auto part but it's my choice, if you have comments keep it as questions and I will explain reasoning and thought process.... D motor can make good power... I'm looking for around 300

[Sinfix_15]

I wish people knew what a "build" was.

[undrgrndrdr1]

I wish people knew what a "build" was.

You mean like me eagle h beam rods and Nippon racing pistons and completely redone head???? If so read back where I say I have to get pics of all that to post...

[Jdm94Coupe]

Lol I'm just fuckin wit u man. I have a sohc myself..... I need to update my build thread too, so much shit I haven't even posted too......

[GlennsEK]

Looks good!

[Genji-Sama]

Needs more stretch for all that poke and some camber all around to make it tuck right, but that's just me. I like ur rear window visor :goodjob:

[98blackcivic]

i miss my ej8

[undrgrndrdr1]

Gonna have the camber kit on this weekend so the front won't poke as much... Will have those pics up after done along with my "build" parts

[RsonGt3's]

Gonna have the camber kit on this weekend so the front won't poke as much... Will have those pics up after done along with my "build" parts

Once again why a camber kit if you have zero offset to make um look good dont you gotta have negative camber just saying...

Sent from my PC36100 using Tapatalk

[undrgrndrdr1]

The car is running -3 degrees in the rear and -2.75 in the front...
The camber kit will allow me to add a little more negative camber to get the wheels in some...I said I was not going to run crazy camber like -7 or -8 degrees to slam the car

[RsonGt3's]

The car is running -3 degrees in the rear and -2.75 in the front...
The camber kit will allow me to add a little more negative camber to get the wheels in some...I said I was not going to run crazy camber like -7 or -8 degrees to slam the car

Oh didn't know that so I asked looking forward to see it slammed

Sent from my PC36100 using Tapatalk

[Catnip]

Your Neogens will do just fine with a boosted automatic. The automatic, however, will not. I think it's been proven 200whp will kill a D series auto right away.

[Echonova]

Your Neogens will do just fine with a boosted automatic.Indeed. I love my NeoGens. Not the grippy-est tire, but so far are wearing like iron.

[Infamous_1]

ah, i want a 4 door now. =/ too bad nobody is sellin theirs..

[undrgrndrdr1]

That is what I have heard on the trans... But I'm gonna see what happens

[undrgrndrdr1]

ah, i want a 4 door now. =/ too bad nobody is sellin theirs..
issue

For the right price mine can be yours!

[Sol-Badguy]

You want life out of your tires, but I can already see where your cut springs are causing the fenders to slice into the tread of your tires?

Something doesn't add up..

[undrgrndrdr1]

You want life out of your tires, but I can already see where your cut springs are causing the fenders to slice into the tread of your tires?

Something doesn't add up..

Actually that is from the guy who I got them from... He found out he couldn't fit them so I got stupid deal on them.... I have zero scrubbing issues

[Drummerboy]

That is what I have heard on the trans... But I'm gonna see what happens

Why see what happens? You know what happens. It blows up.

I would understand if you had a motor/tranny that no one has done the set up with, but come on. If it's been done, learn from their mistakes.

[Echonova]

Rubbin' is racing.

[undrgrndrdr1]

Why see what happens? You know what happens. It blows up.

I would understand if you had a motor/tranny that no one has done the set up with, but come on. If it's been done, learn from their mistakes.

Because I have seen zero proof of anyone running the auto tranny with power... It's words and to me words aren't crap... Yes I know the tranny is going to blow, I'm not denying that but I'm gonna see how it holds up

[Rhys.]

as long as its good for one pass hes good lol... crazy bastard

[4wslude]

yeah and rhys is dumb it should be good for a few passes

[Rhys.]

figure of speech broski but really with him driving it ill give it an hour or 2......

[undrgrndrdr1]

No gay love you two... Be nice!!!

[Rhys.]

No gay love you two... Be nice!!!
dont get to excited lol

[Infamous_1]

issue

For the right price mine can be yours!

Pm'ed sir

[LIKEG6]

Get some 195/45r16, camber kits good suspension and you're good.

[Echonova]

This car is what I like and my views of clean, hate is just compliments to me!


Because I have seen zero proof of anyone running the auto tranny with power... It's words and to me words aren't crap... You have to be troll.

[Sol-Badguy]

Actually that is from the guy who I got them from... He found out he couldn't fit them so I got stupid deal on them.... I have zero scrubbing issues

As long as you can make them look okay. I'm not one for that kind of offset.

[undrgrndrdr1]

50 trim ebay XS power wastegate
http://i663.photobucket.com/albums/uu355/slprwgn/IMG_0776.jpg
greddy emanage
http://i663.photobucket.com/albums/uu355/slprwgn/IMG_0775.jpg
dsm 450cc
http://i663.photobucket.com/albums/uu355/slprwgn/IMG_0774.jpg
Y8 block
http://i663.photobucket.com/albums/uu355/slprwgn/IMG_0772.jpg
http://i663.photobucket.com/albums/uu355/slprwgn/IMG_0771.jpg
Y8 head complete rebuild
http://i663.photobucket.com/albums/uu355/slprwgn/photo1-5.jpg
http://i663.photobucket.com/albums/uu355/slprwgn/photo2-4.jpg
a/c compatible manifold
http://i663.photobucket.com/albums/uu355/slprwgn/IMG_0770.jpg
polished crank
http://i663.photobucket.com/albums/uu355/slprwgn/IMG_0769.jpg
eagle H beam rods
http://i663.photobucket.com/albums/uu355/slprwgn/IMG_0767.jpg
nippon racing 8.5:1 pistons
http://i663.photobucket.com/albums/uu355/slprwgn/IMG_0766.jpg
ARP head studs
http://i663.photobucket.com/albums/uu355/slprwgn/IMG_0765.jpg

[undrgrndrdr1]

installed my camber kits... just eyeballed my adjustments but will be putting it on the alignment rack to make everything even soon enough... thought i would snap two quick ones, i know it needs lower but still waiting on coils..

http://i663.photobucket.com/albums/uu355/slprwgn/IMG_0783.jpg
http://i663.photobucket.com/albums/uu355/slprwgn/IMG_0784.jpg

[Dylan]

Hell Yes!! EBAY turbo kit FTW! GLW going fast yo...

[undrgrndrdr1]

^^^ I sense sarcasm!!! Lol

[bus-a-vtec]

nice build get rid of that greddy e manage bullshit, s300 baby only $500 or u better off goin chrome

[4wslude]

can he still stay automatic with chrome

[undrgrndrdr1]

car is obd2a and from all my research because of the automatic its a money pit to swap to obd1.... i would have to change to obd1 trans and trans module then get the jumper harness for automatic to manual conversion or swap the whole harness... i got the emange for stupid cheap and it will allow me to stay obd2 run a stock ex computer and be able to tune... if anyone has any other ways that does not cost buckets of money then please fill me in!

[CHADbee]

I give your props for doing a 4 door but you should really save your money and do things the right way.

[undrgrndrdr1]

Please explain right way? What do you see as me not doing right?

[CHADbee]

Please explain right way? What do you see as me not doing right?
Cut springs, eBay turbo, poor choice in engine management, weak transmission. Better to leave your car stock and get good parts instead of cheeping out. That just my opinion though, my car is stock suspension and I would love a drop but I'm saving for coilovers. There is no way I would put lowering springs on stock shocks much less cut my springs.

[Drummerboy]

If you want to upgrade to Emanage Ultimate, lmk. I've got the entire set up for sale.

[undrgrndrdr1]

Well if you read the thread it's just to get by... I know plenty of people running eBay turbos with no issues and make great power... If you don't like the engine management then you tell me what you suggest because I clearly stated I will take all knowledge offered... As for the trans it's an experiment not doing something wrong in my opinion... Last man this is a budget car with spare money that I have and scrounge up, I don't see a point in saving for months on end just to get name brand when I could get stuff that works great and gets me enjoying my project sooner... Just my opinion

[Drummerboy]

Well if you read the thread it's just to get by... I know plenty of people running eBay turbos with no issues and make great power... If you don't like the engine management then you tell me what you suggest because I clearly stated I will take all knowledge offered... As for the trans it's an experiment not doing something wrong in my opinion... Last man this is a budget car with spare money that I have and scrounge up, I don't see a point in saving for months on end just to get name brand when I could get stuff that works great and gets me enjoying my project sooner... Just my opinion

I have no personal experience with ebay turbos, I went straight to Turbonetics. From what I hear though, they tend to develop shaft play much sooner than name brand turbos.

As far as Emanage vs Emanage Ultimate, You have more options and the ability to fine tune more with Ultimate. It is just a better all around setup. Kinda like going from S100 to S300. Again, selling my entire setup for $300. Includes all harnesses.

[undrgrndrdr1]

Can I run s300 on a stock computer in obd2a... Sorry haven't heard much about s300 in my talks with shops and tuners

[Sammich]

fail setup, sorry to say it

[Genji-Sama]

:goodjob: on the head rebuild, crank, pistons and motor swap, but my opinion on everything else is right in line with everyone elses. But i figured i'd compliment you on what you did right :goodjob:

[undrgrndrdr1]

There is no right and wrong... Opinions are welcome... Just because I want to see what the automatic tranny can hold does not mean it's wrong, just not what YOU would do... As for the engine management every wants to say wrong but I see no one offering up answers to if I can run s300 on a stock computer and stay obd2

[Dylan]

You would need to convert to obd1 for the s300. I'm sure you won't though since you want to build a cheap race car. And there is a right and wrong way to do things. With the way you are doing things now you are going to spend more than you already have just to replace the poor quality products you have purchased. All I'm saying is that you are wasting the hell out of your money just to be different.:2cents:

[Genji-Sama]

There is no right and wrong... Opinions are welcome... Just because I want to see what the automatic tranny can hold does not mean it's wrong, just not what YOU would do... As for the engine management every wants to say wrong but I see no one offering up answers to if I can run s300 on a stock computer and stay obd2

My "b" shouldn't have said "right". I wanted to compliment on what you did "quality-ily", ...almost positive that's not a word, but you get the point ":goodjob:

[undrgrndrdr1]

Genji-sama I understood you... Thanks... I see no issue in running the automatic, I want to know it will handle so I will... When it's gone I will convert to manual no money difference in if I do it now or not... And for wasting money, every person on here waste money one our vehicles... They are not investments, we do it cause we want and it's what we like... I'm doing what I want and like... Btw 2 cents accepted and appreciated

[hybrid90accord]

#Ewww

[EricEk]

This is the dumbest "project" ever, smh, seems like you MExican...Screw it, gooooood ole jimmy back up plan. lol

[Drummerboy]

^ wtf are you talking about?

[tdurr]

I just saw the the first posT and the last page. idk hiw much hes tryib to make but if ge doesnt beat it ir try and maje like 300 hell be okay with a ebaj kit and a good tune

[Austin?]

I just saw the the first posT and the last page. idk hiw much hes tryib to make but if ge doesnt beat it ir try and maje like 300 hell be okay with a ebaj kit and a good tune

WTF are you trying to say?

[tdurr]

Lol holy shit i didnt reread my post. Thank the touchscreen and large fingers.
But pretty much, if he aint going for big power then hell be okay

[Dylan]

This is the dumbest "project" ever, smh, seems like you MExican...Screw it, gooooood ole jimmy back up plan. lol


I just saw the the first posT and the last page. idk hiw much hes tryib to make but if ge doesnt beat it ir try and maje like 300 hell be okay with a ebaj kit and a good tune

:wtf:

[undrgrndrdr1]

well all has changed... been really busy but motor is getting close to being done and i have one picture for an update.

http://i663.photobucket.com/albums/uu355/slprwgn/301977_1960224540200_1680413186_1424054_413454670_ n.jpg

my buddy totaled his car and timing happened just right so the haters get what they want and no more automatic...

[wanggsticky]

lol so the haters get what they want?^^^ lmaaoooo

[undrgrndrdr1]

I was always gonna go to 5 speed just wanted to run it auto first but with everything happening right now before the motor is in I might as well swap to save time... Doesn't make me happy making the haters get what they want... Haters make the world go round lol

[EricEk]

Poor Ek, you better rock those pedals!! pics of it too!

[silversol]

I was always gonna go to 5 speed just wanted to run it auto first but with everything happening right now before the motor is in I might as well swap to save time... Doesn't make me happy making the haters get what they want... Haters make the world go round lol

You sound like a very intelligent individual.

[undrgrndrdr1]

You sound like a very intelligent individual.

Yay for sarcasm

[undrgrndrdr1]

well few crappy cell phone pics till i get the camera stuff uploaded.. old motor and trans pulled and started assembly of the motor today... things are starting to come together... even got my coil overs installed but with no motor cant even tell so pictures to come of that later....
http://i663.photobucket.com/albums/uu355/slprwgn/315549_1973543233159_1680413186_1432651_1003324033 _n.jpg
http://i663.photobucket.com/albums/uu355/slprwgn/317377_1973195184458_1680413186_1432495_391456106_ n.jpg

[thinkskater]

This thread is simply form over function. And honestly there is nothing wrong with that. His way of doing things.