'Somebody call a doctor! : DR. CRX shoot WARNING 72mm Snail Content INSIDE'

[Civicn33b]

Well he is going for a full tune once his new 1600cc injectors get here and we have already scheduled another shoot in which I am going to get some action photos at the track in full race trim slicks n skinnies as well as some better static shots.

1.
http://farm7.static.flickr.com/6207/6035940812_3112e72131_b.jpg
2.
http://farm7.static.flickr.com/6062/6035386643_318624d90c_b.jpg
3.
http://farm7.static.flickr.com/6198/6035941274_afe6f32529_b.jpg
4.
http://farm7.static.flickr.com/6186/6033978092_9dbf6e001d_b.jpg
5.
http://farm7.static.flickr.com/6121/6035386917_a4886e0510_b.jpg
6.
http://farm7.static.flickr.com/6080/6035386515_36526430ae_b.jpg

[RsonGt3's]

Everything so nice till I saw the front but I gess the motor makes up for it

Sent from my PC36100 using Tapatalk

[Ziptied]

Don't care how fast it is, the front end makes it more suited for the WTF section.

[Austin?]

NOOOooooo!!!!!!!

[JDMDA_1.7]

Looking good donny!!

[Franco Tirador]

i like

[Wicho_ej6]

Love this crx the guy is very cool and did my wire tuck and looks bad ass and there's a reason he did that front end ya can't see the turbo?????

[j0nbunklah0m]

not bad, the back looks small compared to the front though

[Genji-Sama]

:camera: #2 and all it's glory is keeping me from saying bad things about this car, but OH MAH shot #2 :goodjob: :goodjob:

[-EnVus-]

I wonder what this conversion looks like on a Ef hatch

[cm7k24]

pictures don't do justice to how well built and put together this car is

[quiet_s0ng]

the curves of the EM1 front doesn't go well with the wedge look of the crx but i give props to the craftsmanship of the job shit looks clean

[Bacon]

Love the color, build, and wheels. Front end is :no:

[chris89hatch]

it looks fawking great looks perfectly put together u can tell lots of hard work and time put into this car.... great job donnie, ur work has finally paid off





I wonder what this conversion looks like on a Ef hatch

conversion look pretty good, me and my buddy had one a while back it was weird as hell at first but it look pretty good.

[spank]

Love this crx the guy is very cool and did my wire tuck and looks bad ass and there's a reason he did that front end ya can't see the turbo?????

i had this setup before with my ef front end...the car is clean but i say no to the front end

[firby911]

Nice crx,not a fan of the front end.

[Civicn33b]

Thanks guys. I pride Donny for doing something completely against the grain, the craftsmanship that went into this car was ridiculous. He doesn't do forums bc haters will hate anything different. I'm all for anyone modding any car as long as the work is quality, taste however is subjective... not to mention, pretty sure he would walk out on a lot of Atlanta.

[Rhys.]

I wonder what this conversion looks like on a Ef hatch

yeah i would have donr a hatch instead of a crx

[Black4DrEK]

Im sure this car has LOTS of time and Money in it.. BUT that FRONT END IS UGLY!! Specially with that "type R STYLE" front lip..


I would'a kept a stock front or SIR JDM or something!

[RsonGt3's]

Thanks guys. I pride Donny for doing something completely against the grain, the craftsmanship that went into this car was ridiculous. He doesn't do forums bc haters will hate anything different. I'm all for anyone modding any car as long as the work is quality, taste however is subjective... not to mention, pretty sure he would walk out on a lot of Atlanta.

Whose hating no one has posted "am hating on this car" its just an opinion just because no one but a few like the front doesn't mean they are hating on your car

Sent from my PC36100 using Tapatalk

[elbori87]

really dnt like the front end but that crx looks hot....

[Starrfire]

The engine bay looks really nice, but I don't care for the rest of the car. Orange isn't me so that is a personal turn off. The paint is nice enough in person. Craftsmanship is there, and the guy knows what he is doing but the front end and diffusers also don't jive with me. Different strokes for different folks.

[i4_garage]

That shit would of been beast with a Jdm EF Front

[Black4DrEK]

That shit would of been beast with a Jdm EF Front


Keepin it real, playa!

[JDMJ]

If any of you guys know Donnie, or this car..It has had this front end for a long time. Slowly improving this car its turned into a monster, dude is super cool and knows alot about what hes doing!

[Genji-Sama]

Whose hating no one has posted "am hating on this car" its just an opinion just because no one but a few like the front doesn't mean they are hating on your car

Sent from my PC36100 using Tapatalk

Lol, seems like u saw the word hating and just went into a furry. He said that it's not his car like 6 words in :goodjob:

[Wicho_ej6]

i had this setup before with my ef front end...the car is clean but i say no to the front end

But I bet u didn't have alot of clearance .

[1civic]

Thanks guys. I pride Donny for doing something completely against the grain, the craftsmanship that went into this car was ridiculous. He doesn't do forums bc haters will hate anything different. I'm all for anyone modding any car as long as the work is quality, taste however is subjective... not to mention, pretty sure he would walk out on a lot of Atlanta.

Hate, naw homie, the fender was not section'd in right so it has a big ass wheel gap, then you move to the bumper not meeting the fender correctly.. Re-think the wheel-well gap, correct it and the car will look loads better... No hate!!! Just a Fact!!

Later!

[Drummerboy]

1440x900 of pic 4?

[alex14]

This is by far the coolest honda I have ever seen.

[CB7tuner]

The front fender well arch and the arch of the front bumper are TOTALLY different. The front end completely kills this car as others have said but the bay is nice

[silverDA]

there are ef clips on ebay.

[dannysun]

Crx have small engine bay room. A ek front end makes more room for a 3 inch intercooler piping and room for a 4 inch downpipe.

[spank]

But I bet u didn't have alot of clearance .

clearance is always going to be an issue with ef....im sure that the clearance is not a whole lot better with this front end

[spank]

lol...this was cool late 90's - early 2000's but not now

[PTCDC5]

Eh, this car have some things going for it and some things not. Good shots and overall well put together though, can't argue there.

[h22 jones]

I love crxs and have went against the grain and done many different front ends myself but that front end doesnt go good with this car and yes he did a ok job on the conversion but as nice as the car is he could have made it line up better. I have helped with a integra front end on a ef hatch that was nasty in a bad way looked terrible but not my car. I helped with a ek front end on a eg hatch it was ok not to bad. I helped with a integra front end on a eg hatch i looked to long was such a nice car it didnt matter made all the magazines. i think i eg front end would be perfect. Its not to far from the stock front end but looks better and doesnt look near as big as the ek front end. The ek front end looks bigger then the whole car but dont get me wrong its a very,very nice car and trust me i know the time it takes to get one this way good job to each his own. It looks way better then the damn delsole with the ek front end in the fs section lol.

[JITB]

in person all these in perfections are non existent...lol! Its a top notch conversion, and if everyone thought the way 80% of hondas owners thought, it would be a very boring honda crowd!

BTW, Josh you cant post links to the blog on Import Atlanta, they will delete it!

[Hondatypr636]

The car is clean. Def not a fan of the front end but props for the work and craftsmanship that was put into it. The engine bay is pretty sick though.

[.blank cd]

Circular Polarizer

http://farm7.static.flickr.com/6121/6035386917_a4886e0510_b.jpg

[quickdodge®]

I would like to know why someone would put a CRX rear end on a Civic front piece?




He doesn't do forums bc haters will hate anything different.

Lolol @ the misused word.


and if everyone thought the way 80% of hondas owners thought, it would be a very boring honda crowd!

It's been a very boring Honda crowd since about 2003, lolol. Later, QD.

[dc2killa]

Looks nice to me, that's creative.

[Cynical 1]

wow, a new way to ruin a crx - put an ek front on it...

[bondo]

does anybody know how to get ahold of donnie pls pm me if you do need him to take a look at my teg, thanks

[Catnip]

http://farm7.static.flickr.com/6121/6035386917_a4886e0510_b.jpg

Exactly what Bobby said. That wheel opening difference is gross.

[DustnU]

That's just WRONG on SO MANY levels!! Clean ass paint, motor, wheels then BAM the Ek front end :(

[JITB]

If we were able to link you all to the info on the car i would, but i will have to say the car was involved in a collision and the front end was destroyed, and the idea of the front came to play. It wasnt the original plan.

[JAY5]

nice, i think its different and looks a lot better than more than half of the front conversions i see on here.

[JEY$JDM]

...stock front or JDM SiR or something!
That's all the car needs....

[JEY$JDM]

wow, a new way to ruin a crx - put an ek front on it...

not new

[chorne1787]

only conversion ive ever seen that i truly liked was eg hatch with del sol fog light front other then that i like stock body lines better then all others but the craftsmanship other then not modding front bumper is amazing

[ATK_Designs]

amazing setup my friend, you're going to wipe all the smirks of anyone who's talking trash.

[cactusEG]

Mixed feelings about this car. I like it but double take and I kinda dont.

[1civic]

amazing setup my friend, you're going to wipe all the smirks of anyone who's talking trash.

Explain? I hope it's because it runs well, makes some pony's.. Front-end looks like shit!!

No hate, that's a fact!!

End of story!!

[Samhonda95]

it looks fawking great looks perfectly put together


i disagree

#1. hood looks like crap

#2 front wheel well is f'ed up where the bumper and fender meet


yes its clean but poor fitment of front

[eraser4g63]

I honestly Like it .

[Sinfix_15]

for a car that appears to be so well put together, cant believe that front end (particularly the wheel gap) made it into the paint booth.

[SPOOLIN]

it made it into the paint booth because the car owner did the actual conversion i think like 4 years ago. I know the painter...so he just ....Painted it. lol

[JITB]

all this fitment talk about the front end is crazy talk...lol that shit is as good as it gets in person...


And the part of the front you all are talking about has nothing to do with the actual conversion itself, that part is all EK, the front end from the radiator core to about a foot back is all EK front, so that portion has nothing to do with the actual conversion its all EK. He should be at the SF meet..so you all can see it for yourself!

[Catnip]

all this fitment talk about the front end is crazy talk...lol that shit is as good as it gets in person...


And the part of the front you all are talking about has nothing to do with the actual conversion itself, that part is all EK, the front end from the radiator core to about a foot back is all EK front, so that portion has nothing to do with the actual conversion its all EK. He should be at the SF meet..so you all can see it for yourself!



How does it have nothing to do with the conversion when it ruins the whole look of the conversion? Lol. That's like saying, "Oh yea, my car runs perfect with no problems. Has an oil leak, rod knock, and burns coolant though."

[RL...]

a) I dislike the color orange on any car lol
b) That front does not look good being on a crx, it just doesn't flow with the rest of the car

[Humphrizzle]

the curves of the EM1 front doesn't go well with the wedge look of the crx but i give props to the craftsmanship of the job shit looks clean

THIS FRONT END CAME ON ALL CIVICS IN ALL TRIM LEVELS FROM 1999-2000

it's not an EM1 front end and that front lip looks like crap.

car is confusing.

[DA9_Vito]

It's different therefore I can dip it.

[Sinfix_15]

all this fitment talk about the front end is crazy talk...lol that shit is as good as it gets in person...


And the part of the front you all are talking about has nothing to do with the actual conversion itself, that part is all EK, the front end from the radiator core to about a foot back is all EK front, so that portion has nothing to do with the actual conversion its all EK. He should be at the SF meet..so you all can see it for yourself!

its not like the car is ugly, its a good looking car. At first glance i was like DAYUMMMMMM... but then when i noticed the wheel gap i couldnt take my eyes off it.

[Jwall2323]

I don't usually like conversions either. They normally don't line up so good, and so on. But this one is very well done. The car looks good man. And as long as you like it, then it shouldn't matter what everyone else thinks.

[southside]

Clean car,Nice paint and body lines,Considering half these conversions come out with big gaps in the body lines.Function+Form=Nice rex.

[GSRteg®]

Would have keeped the stock front end IMO. :goodjob:

[KevinT707]

That turbo setup is MEAN! I saw it at Import Alliance. The EK front end actually fits well on it.

[greasemunkey]

WINNING! I like it. I would fuck with cops lol...now what car did you catch doing 130??...no see this is not a civic....

[quickdodge®]

.no see this is not a civic....

You sure? Later, QD.

[greasemunkey]

yes officer. I am.

[quickdodge®]

yes officer. I am.

Then you're wrong, sir, in your analogy. Don't forget, the CRX was a Civic. Later, QD.

[h22 jones]

Lol at anybody that thinks the conversion is done right . Just because he actually put a ek core support on it instead of usinf self taping screws does not mean it is done right . There is way to much time put into this car for that wheel gap to be that fd up . There is also no reason for it to be that fd up . If you tell me that there is no way to fix it correctly then he shouldnt have did the conversion period it makes a very,very nice car look like shit . I just dont understand how people can say see it in person man its done rigt. How can you call it right with the wheel gap looking like that ? Is the wheel gap going to magicaly fix itself in person lol ? if you have to have that front end man fine but atleast let me fix the wheel gap for you lol.

[2turbo4u]

i like it

[Boosting EG]

I like

[SPOOLIN]

the wheel gap will get fixed the first time the car launches on slicks lol

[JDMJ]

its not like the car is ugly, its a good looking car. At first glance i was like DAYUMMMMMM... but then when i noticed the wheel gap i couldnt take my eyes off it.

Wheel gap? Its a freaking race car. Cant fit slicks when your lowered 5 inches..

[Sinfix_15]

Wheel gap? Its a freaking race car. Cant fit slicks when your lowered 5 inches..

im not talking about how big the gap is. the front doesnt line up.

[SPOOLIN]

Cant fit slicks when your lowered 5 inches..

are you from the past?

[boostedb16]

i dont normally like front end conversions but to me , this works.

[quickdodge®]

^^^ Saw your car the other day. Still nice and clean. Later, QD.

[boostedb16]

THIS FRONT END CAME ON ALL CIVICS IN ALL TRIM LEVELS FROM 1999-2000

it's not an EM1 front end and that front lip looks like crap.

car is confusing.he just wanted to use the term "EM1" lol.

[boostedb16]

^^^ Saw your car the other day. Still nice and clean. Later, QD.you need to stop in one day or hell give me a call and we can grab some lunch.