Civic Wagon B series swap

[mikesEK]

Just purchased a 1990 civic wagon(automatic), and
About to go buy a 1995 integra(automatic)

And looking to put The B in my Wagon

If you guys could give me a little insight
As to what I should buy or prepare myself
For that would be GREATLY appreciated

Ive done one swap years ago ((b16a2 into EK hatch))

But I'm definitely no Honda master

But yeah , point me in the right direction
Like axel? Harness? Mounts?

Thanks IA

[mikesEK]

Really guys....... Ok , anyone want to do the swap? If so how much?

[Theycall_Metue]

rarely do people do d-series to b-series automatic swaps.
good luck with info.
it may not be too different from manuel swaps but i have not done it myself.

[mikesEK]

Yeah..... I asked myself the last time I saw
A b-auto swap...... And I don't think I ever
Have.... But SURELY someone has done it LOL

[4wslude]

im going to send you my friends number he should be able to help you

[Romeo]

Easiest route to go is to use the full DA front hubs, so you'' have the integra brakes up front. You'll be able to use factory integra axles also. I'm not sure about the mounts with the auto trans. Google that chit!

[mikesEK]

Wasn't going worry with swapping breaks ((have wilwood BBK))
,,,, BUT is it MANDATORY?? will the DA axles don't threw the
Own EE hubs??

[SpeedDeMoN]

HEY I.A i need SOME SERIOUS HELP/ INSTRUCTIONS on how to lower the FRONT END on my new 1987 civic WAGON.. remember that this model year wagovan did not come with spring/shock set up or assembly. THIS IS "TORSION BARS" (in front) what can i do with this set up? is there anything that i can do/remove/modify.. ANYTHING! to lower it? iver heard about the adjustment screws and have already played with those..but i want this thing slammed. need experienced "ex-antique model civic enthusiast or someone who knows about these cars thanx

[1civic]

HEY I.A i need SOME SERIOUS HELP/ INSTRUCTIONS on how to lower the FRONT END on my new 1987 civic WAGON.. remember that this model year wagovan did not come with spring/shock set up or assembly. THIS IS "TORSION BARS" (in front) what can i do with this set up? is there anything that i can do/remove/modify.. ANYTHING! to lower it? iver heard about the adjustment screws and have already played with those..but i want this thing slammed. need experienced "ex-antique model civic enthusiast or someone who knows about these cars thanx

longer bolt or remove the bolt, doubt you will find a kit...

[SpeedDeMoN]

ok so if i go with longer bolts...to do this i would need to remove the whole crossmember to get to the top of the bolts in order to replace them??

[mikesEK]

Wtf.... Thread jack