FS\FT-Enkei 92 REAL DEAL, Rare 16x8 0 offset 4x108 3" lip - Grey mesh with polish lip

[noridetoolow]

gone

[ekjohn]

man i love to have this too if it was 4x100 bump for u sir

[noridetoolow]

man i love to have this too if it was 4x100 bump for u sir

Thanks for the bump! I feel ya! Lol

[Drummerboy]

get wheel adapters man. they'd look nice on the cb7.

[MistaCee]

^^ the wheel adapters they make are way too thick smh.. Nice wheels though.

[noridetoolow]

get wheel adapters man. they'd look nice on the cb7.


^^ the wheel adapters they make are way too thick smh.. Nice wheels though.

Yep, what Drummerboy said, 0 offset is already wide enough, i drop on wheel adapters (which also cost another $200) and these things would be sitting WAYYYYYYY WIDE lol

[goi_ek]

Hmmm these would fit my girls Ford tempo...lol

[wanggsticky]

they actually sell enkei 92s on ebay as a whole set now, brand new also

[noridetoolow]

they actually sell enkei 92s on ebay as a whole set now, brand new also

True but from what I have been told (and looking on ebay now to double check lol) the 16x8 is hard to find and finding that in a 0 offset is even harder.

[wanggsticky]

yeah they're harder to find but it wont fit all these hondas. with adapters the wheels are probably gonna have too much poke. sometimes too little offset dont make a wheel uber cool!

[noridetoolow]

yeah they're harder to find but it wont fit all these hondas. with adapters the wheels are probably gonna have too much poke. sometimes too little offset dont make a wheel uber cool!

Very very true but I understand these wheels have a not so common fitment, there are more then Honda's on Import Atlanta ;) I dont aim to sell these to someone with a Civic

[noridetoolow]

ttt

[ash7]

yeah they're harder to find but it wont fit all these hondas.

All of what Hondas?

-jonathan

[noridetoolow]

All of what Hondas?

-jonathan

Time for a sig pic update pimp! ;)

[noridetoolow]

daily shot to the top

[noridetoolow]

up

[EX-Svic]

i have a set of 4 adapters to adapt 4x108 to 4x100 . they are 1" thick. so about -5 on them with the adapter $80 if anyone wants them . all studs in great shape

[noridetoolow]

i have a set of 4 adapters to adapt 4x108 to 4x100 . they are 1" thick. so about -5 on them with the adapter $80 if anyone wants them . all studs in great shape

That's what's up! I'll update the OP later to reflect this option. Thanks

[noridetoolow]

bump

[GetFRESH!]

i have a set of 4 adapters to adapt 4x108 to 4x100 . they are 1" thick. so about -5 on them with the adapter $80 if anyone wants them . all studs in great shape

-5? a 1" adapter would put the offset at roughly -25.4... which would essentially have the "look" and fitment of a 16x9 +0 wheel, which I've seen done on Reznut's EF sedan:
http://forums.g2ic.com/images00/i235.photobucket.com/albums/ee5/bweeeezy/ef4door.jpg

All you'd need is super-refined negative camber settings, rolled (and probably slightly pulled) fenders, and some decently stretched tires (195/45/16 t1r's or 195/40/16 s-drives would probably do the trick). There would definitely be some poke, but I believe you could pull this off if you take your time and do it properly and tastefully.

:goodjob:

[noridetoolow]

-5? a 1" adapter would put the offset at roughly -25.4... which would essentially have the "look" and fitment of a 16x9 +0 wheel, which I've seen done on Reznut's EF sedan:
http://forums.g2ic.com/images00/i235.photobucket.com/albums/ee5/bweeeezy/ef4door.jpg

All you'd need is super-refined negative camber settings, rolled (and probably slightly pulled) fenders, and some decently stretched tires (195/45/16 t1r's or 195/40/16 s-drives would probably do the trick). There would definitely be some poke, but I believe you could pull this off if you take your time and do it properly and tastefully.

:goodjob:

Andrew....YOU should go for it then! lol jk.....the only way you should ever get rid of those SSRs is if I get something 4x100 again and you give em to me!

[GetFRESH!]

SSR's are long gone bro :cry: I'm rollin on Jon's old Kosei K1's now.

[noridetoolow]

SSR's are long gone bro :cry: I'm rollin on Jon's old Kosei K1's now.

Dang, I loved those wheels!!! lol

[chorne1787]

man if these wheren't 0 offset i would space them out on the cb9 these would look perfect of course then you would be doing that also lol

[chorne1787]

also 16x8 with a 1 inch spacer would fit like a 16x10 since a 16x9 would only stick out half an inch more then a 16x8 with same offset

[noridetoolow]

bump

[noridetoolow]

bump

[noridetoolow]

bump

[noridetoolow]

bump

[noridetoolow]

come get these ;)

[Prime.]

also 16x8 with a 1 inch spacer would fit like a 16x10 since a 16x9 would only stick out half an inch more then a 16x8 with same offset

Correct. You could get 15mm adapters which would make it like a x9 -3ish.

[JITB]

are you sure these ar 4x108? did you test fit them on something 108?

if so put them on focus forums, and they will go quick!

[wanggsticky]

-5? a 1" adapter would put the offset at roughly -25.4... which would essentially have the "look" and fitment of a 16x9 +0 wheel, which I've seen done on Reznut's EF sedan:
http://forums.g2ic.com/images00/i235.photobucket.com/albums/ee5/bweeeezy/ef4door.jpg

All you'd need is super-refined negative camber settings, rolled (and probably slightly pulled) fenders, and some decently stretched tires (195/45/16 t1r's or 195/40/16 s-drives would probably do the trick). There would definitely be some poke, but I believe you could pull this off if you take your time and do it properly and tastefully.

:goodjob:

wow that looks amazing!

[noridetoolow]

are you sure these ar 4x108? did you test fit them on something 108?

if so put them on focus forums, and they will go quick!

I had someone on Stanceworks request more pics so I will take a pic of the measurement. Someone on there with a Focus is asking about them so looks like a good idea! ;)

Thanks

[noridetoolow]

Bumpage

[noridetoolow]

TTT

[noridetoolow]

up

[noridetoolow]

bump

[noridetoolow]

bump

[noridetoolow]

ttt

[noridetoolow]

bump

[noridetoolow]

Comon Focus owners, these are for you! ;)

[Drummerboy]

Bump for nice wheels. Fill and redrill possible?

[noridetoolow]

Bump for nice wheels. Fill and redrill possible?

I don't believe it's an option, the inside of the wheels hubs are hollow with the exception of where the current lug holes are. So to do it would require filling and re-drilling in almost the same exact locations as the current lug holes. I don't know that adding the aluminum and drilling it back out is safe or possible :/

[noridetoolow]

Need fast cash weekend only low price offer!

[ash7]

bump for a pimp!

-jonathan

[noridetoolow]

price drop bump

[ash7]

Rebecca Black Friday bump.

-jonathan

[noridetoolow]

GOW 3 Release date BUMP!

[nateej1]

Trade for jmagss? 15x7 4x100

[noridetoolow]

Trade for jmagss? 15x7 4x100

text me some pics, you will find my number on page 1, I'm interested

[six7teen]

sell these already jerry! :D