View Full Version : wtb 4.4 final drive
p72ek9
07-19-2011, 11:31 AM
I'm lookin for a b series 4.4 final drive, that will bolt up to my obx lsd-9000 so I can finish my tranny. If you have anything just lmk.
p72ek9
07-21-2011, 11:03 AM
up
EmminoDaGreat
07-21-2011, 01:33 PM
Not all diffs are the same diamator, was it b16 or gsr?
p72ek9
07-22-2011, 09:32 AM
B16 cause the final drive i have almost bolts up but the patteren is just a little bit to small. Gsr wouldnt work cause of the tappered bearing and the final drive gear bolts up different than the b16. i was doing research and im sure one out of a cable Ls would work also.
h22 jones
07-22-2011, 02:26 PM
i have a b16 and a gsr 478-808-9122
p72ek9
07-22-2011, 03:18 PM
k ill call ya monday afternoon when i get off work.
EmminoDaGreat
07-22-2011, 03:57 PM
You can however swap diff bearings to the sealed, w/ a b16 shim and it will do the same just fyi.
h22 jones
07-22-2011, 09:14 PM
You can however swap diff bearings to the sealed, w/ a b16 shim and it will do the same just fyi.
Dont be giving away to much info on building trannys i make alot of money on them lol.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.