WTB Universal Muffler

[Srt]

Got a hole in my preludes muffler, looking for any universal muffler to replace it. Used/new idc, anything under $50 ill take probably.
770-572-7869

[-EnVus-]

There wAs a few on here under parts section. If those are gone pePboys did have some decent ones for like $39+

[Srt]

I'm in Hall county, not sure where the closest PepBoys is, I work at AZ and we sell some 3A racing muffler for 50, I get 20% off. But its stupid looking.
Was looking at some universal N1 mufflers on ebay, deciding.. Want 2.5 inlet 3.5 tip

[-EnVus-]

Yeah I was gonna say go eBay they have nice ones but didn't wanna sound like all the other eBay pushers lol
I've had plenty from eBay and yeAh I'd only have a N1 or dragged style on my ride.
I'm in winder and closes to me I know of is one by Georgia sqare mall

[Scotsman]

you can get a full catback off egay for like 120

[Srt]

Yeah was thinking about going cheap catback, but really this is temporary, and im sure the stock piping/resonator will keep it somewhat at a quieter tone/less bumble bee sounding

[Scotsman]

if not advance auto ( where i work) has dc ones for $50 and i could use my 20% to help ya , pm for details , im in winder

[Srt]

http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_DC-RD-Stainless-Steel-Cut-Tip-DC-Sports_10027726-P_N3333F_P|GRP2023P_____
(that one?)

[-EnVus-]

http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_DC-RD-Stainless-Steel-Cut-Tip-DC-Sports_10027726-P_N3333F_P|GRP2023P_____
(that one?)

See that is to oval looking to me i like the square weld or w/e style like the N1

[Scotsman]

yessir

[-EnVus-]

http://www.google.com/m/search?site=images&source=mog&hl=en&gl=us&client=safari&q=n1%20muffler&sa=N#i=7

[Srt]

Yeah, i'm not feeling the DC one too much, but if I used your discount that wouldn't be too bad of a deal.
http://cgi.ebay.com/ebaymotors/Acura-Integra-RSX-Legend-CL-Burn-Tip-N1-Muffler-Exhaust-_W0QQcmdZViewItemQQhashZitem53e807be56QQitemZ36037 5107158QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries
I was looking at that one ^^ because of the inlet/tip size, pretty much what I was looking for. I don't mind the burnt tip too much, what do you guys think

[Scotsman]

tip is smaller on the dc , but that one is nice

[-EnVus-]

Should be fine burnt is ok IMO

[Srt]

what's the tip size on that DC?

[Scotsman]

wanna say 2.5-3

[Srt]

ill probably check it out and let you know. you ever used one/heard one ?

[Scotsman]

no , but been eyein it for a minute