Prelude not getting spark, I have fuel

[Drummerboy]

Tdurr and I just finished the swap (dohc f20a obd1) into a 96 (obd2a) Prelude.

Im getting fuel, but no spark. what should I be checking? I'd love to get this cranked tonight.

[psycho_freke]

Timing?

[EmminoDaGreat]

I would be willing to bet you didnt exted the sensors from the crank to the obd1 distributor...

[Drummerboy]

I would be willing to bet you didnt exted the sensors from the crank to the obd1 distributor...

I did, Rywire harness. You'll have pm.

[K24cb7coupe]

icm, coil, or you need a new distributor

[tuyen]

Check your ecu. My integra gsr didn't have any spark so I replace the distributor but then it wasn't the problem so I got a new ecu it crank right up. If that help. I could be wrong.

[Drummerboy]

Just incase someone searches this, Here's what I figured out...

Rywire sends a jumper wire with the harness. I didn't pay attention to that. It jumps 2 pins from where the external coil used to plug in. I ended up using a 20amp fuse, electrical taped the shit out of it. Cranked right up.