Forged Performance: Chadbee's Evo....Yes you read that right....

[CHADbee]

Wanted to share my new ride with everybody. Its a 2003 Evo VIII. Once we find the time here at the shop we need to finish up the wiring on the car, toss it on the dyno for a base tune, break in the motor then re-tune for E-85 and some real boost. It might be a month or two before you see it on the streets though, we are very busy here and customers cars come first.

Quick run down of whats going on...
Forged Performance Built Shortblock
Shepherd Built Transmission and Transfer Case
Carbonetics Triple Disc Clutch
Full Race Twin Scroll Turbo Kit
Full Race Vertical Core Intercooler(Super rare)
AMS 1000HP Fuel Package
HKS F-Con Standalone
HKS Hypermax Coilovers
Ray's 57 Motorsports wheels


http://i897.photobucket.com/albums/ac177/sbaset/DSC_3612800WM.jpg

[EmminoDaGreat]

I had to replace one of those carbonetics triples when it exploded (could have been the driver) but did I tell you that you suck?

[CHADbee]

I had to replace one of those carbonetics tribles when it exploded (could have been the driver) but did I tell you that you suck?
I dealt with them for years, they are REALLY good clutches. Things happen though.

<3

[RL...]

i hate you

[lanning]

Don't all these come with a magnet for the pussy?

[CHADbee]

i hate you
Hehehhee =P

Don't all these come with a magnet for the pussy?
I have heard, that. Once it hits the streets we will see whats up :D

[Nerdsrock22]

Is the Viberator no more?

[CHADbee]

Is the Viberator no more?

I still have it but it will be up for sale soon. I will be buying a $2000 beater to daily.

[mistergou]

nice new ride!

[CHADbee]

nice new ride!
Thanks :D

[gforce71]

better pictarz were expected... haha. nice pickup though!

[CHADbee]

better pictarz were expected... haha. nice pickup though!
Hahhaa! Well its not drivable right now cause the wiring still needs to be finished up and needs a tune. Once its done and it spends some time with Mirror Detailing then it will receive a REAL shoot.

[Da_unknown]

cool ride bro...

[CHADbee]

cool ride bro...

Thanks dude!

[Axix23]

sick new ride.. Can't go wrong with full-race.. those vertical fmic are sick as hell..

[CHADbee]

sick new ride.. Can't go wrong with full-race.. those vertical fmic are sick as hell..
For the Evo only 10 were made because they couldnt get the cores to make them....so its uberjdmtyte....or something along those lines, as well.

[Dirty Octopus™]

damn Chabizzles! way to come up! I'm glad you're in something worthy of being seen in!

[CHADbee]

damn Chabizzles! way to come up! I'm glad you're in something worthy of being seen in!

Thanks homie, I am pretty happy about it.

[DriftMunkey]

Good buy! I was eying that car for a while now.

[CHADbee]

Good buy! I was eying that car for a while now.

It has been sitting for way too long. I am going to put it to good use :D

[Dwisforme05]

so sick! congrats chad

[GA Scooby]

With you working at forged I am eager to see how this will turn out. Good looking car bro. :)

[SRCRX]

That's a step up to say the least!!

[CHADbee]

so sick! congrats chad
Thanks!

With you working at forged I am eager to see how this will turn out. Good looking car bro. :)
It will turn out fast lol

That's a step up to say the least!!
Ha true story

[Axix23]

can't wait to see the finished product. Which turbo you plan on running?

[CHADbee]

can't wait to see the finished product. Which turbo you plan on running?
It currently has a GT4088R. We are going to tune that on wastegate pressure for me to drive it for a few weeks to break in the motor. Then I am going to switch to a custom built, billet wheel twin scroll 33R turbo with a 1.0 a/r. It currently is on stock intake manifold and throttle body but after I upgrade those it should make 550-ish with 4,000+ RPM of full boost.

[Sammich]

dear chad...are you single? can we make babies? you and i...the maxipad and the ego?!

[CHADbee]

dear chad...are you single? can we make babies? you and i...the maxipad and the ego?!

Yes and no. lol.

[jumpin800agl]

great find, look forward to results.

[Drummerboy]

Did you buy it stock or "in progress"? No shame either way, just curious.

[WhitEvoMr]

thats wsup Chad! Thanks for not getting white =) cant wait to see it all done!

[CHADbee]

great find, look forward to results.
Thanks! Trust me I am too lol

Did you buy it stock or "in progress"? No shame either way, just curious.
This was going to be a Forged Performance shop car but it was never completed. I bought it as it sits and will be finishing the project. It is mostly complete besides the head could use some port work, better cams and I will be changing a few things(like the turbo) to better fit my personal goals for the car.

thats wsup Chad! Thanks for not getting white =) cant wait to see it all done!LOL! I know right! I really wanted an electric blue one but this was such a good deal with so many high quality parts I couldn't pass it up.

[1badgvr4]

Chad can I ask what do you want out of the car?

[RUFFIAN]

Niiice ! Big Score.

[Bacon]

Good score, Chad.

[CHADbee]

Thanks guys


Chad can I ask what do you want out of the car?

The car will be a weekend driver and track monster, both drag and road course. I want an all around performance car. That is why I am taking the 4088R off and am planning to switch to a custom billet wheel 33R turbo. On E-85 it should still make mid 500's but still have a wide powerband so I can take it to a road course a couple times a year.

[cereal2k]

Nice. Congrats!

[SONNY]

Congrats man!! we want to see interior and engine bay pics!!!!

[Black4DrEK]

Damn. One day I will Own a EVO


Congrats on the "new" car man!

[CHADbee]

Nice. Congrats!
Thanks :)

Congrats man!! we want to see interior and engine bay pics!!!!
The bay isnt ready for photos yet, like I said a few things need to be finished up. Hopefully soon though. Just to hold you off this is the manifold that is on the car....

http://www.brewedmotorsports.com/assets/products/full-race/evo8-9/gt37r%20twinscoll%20kit/mani1.jpg

Damn. One day I will Own a EVO


Congrats on the "new" car man!
I said the same thing 3 years ago lol

[TattooedFish]

This is one of my fav cars a buddy in forsyth has one but he wont come off it and I don't blame him

[CHADbee]

Got my 1st parts purchase for my Evo coming in tomorrow according to the tracking number :D

[GA Scooby]

I am excited lol. That manifold is sex man. Maybe consider a new EFR turbo :)

[CHADbee]

I am excited lol. That manifold is sex man. Maybe consider a new EFR turbo :)
Ahhhhhhh......in the shop.....making progress......

http://i897.photobucket.com/albums/ac177/sbaset/EVO/DSC_8064.jpg

[CHADbee]

http://i897.photobucket.com/albums/ac177/sbaset/EVO/DSC_8122.jpg

[uho]

i think i just jizzed in my pantz over that mani!!!!

[CHADbee]

i think i just jizzed in my pantz over that mani!!!!

Hahha it is pretty sexy :)

http://i6.photobucket.com/albums/y226/sti9097/evo20prostreet20div20t420dual2044.jpg

[GA Scooby]

I think the exterior just needs the IX front and JDM rear and it's set. Those wheels weren't doing it for me at first but now they are just fucking fantastic.

[CHADbee]

I think the exterior just needs the IX front and JDM rear and it's set. Those wheels weren't doing it for me at first but now they are just fucking fantastic.
The plan is JDM rear, Carbon side skirts, black housing headlights with 8 front bumper with a nose chop and carbon lip.

like this....

http://img.photobucket.com/albums/v321/RawBurt/The%20Evo/2010-02-06153949.jpg

The wheels are very understated, which I do like. Also not many people run Rays 57 Motorsports wheels which makes the car somewhat different, which is hard to do. I might go to TE37 Super laps or RE30's in silver one day but for now other things are a priority.

[datboy]

Aye, dont be jocking my nose chop!!! This town aint big enough for two AS EVOs with nose chops..............:taun:

[CHADbee]

Aye, dont be jocking my nose chop!!! This town aint big enough for two AS EVOs with nose chops..............:taun:

Hahha! It's all good, no one will mistake us because of my front mount =P

[EmminoDaGreat]

cool lack of a maf bro, way to be a honda.

[GA Scooby]

Hahha! It's all good, no one will mistake us because of my front mount =P

I was gonna ask about that. What is so much more efficient about the vertical versus a horizontal intercooler?

Sorry if I'm asking to many questions and stalking your thread. I'm just really interested in this build. :lol:

[CHADbee]

http://www.youtube.com/watch?v=5uTc9ByITQM


cool lack of a maf bro, way to be a honda.
What you think about that wrinkle red valve cover huh? Type ARRRHHHH tYt3 y0!

I was gonna ask about that. What is so much more efficient about the vertical versus a horizontal intercooler?

Sorry if I'm asking to many questions and stalking your thread. I'm just really interested in this build. :lol:
From what I have read Full Race only made about 10 proto-types of these vertical core FMIC's. They could not get the cores on a consistent basis and had to stop making them. The advantage is in turbo response and spool vs a standard FMIC. This set-up eliminates 22 inches of charge piping!

[EmminoDaGreat]

I like the type r valve cover, and the smoke like a muffugga from sitting so long with a blown up motor residue, i bet lol!!

I dont think that advantage applies to all vertical flow FMIC's as it would solely depend on if you reduced the amount of piping,dimensions of the intercooler, piping diameter etc... What I do like about certain vertical flows is that more often then not the end tankes are tapered, and it cools the air more efficiently since you are using the whole intercooler, instead of a horizontal where airflow may not actually flow through to cool charged air. IE bumper blocking etc.

Less piping, and area = less volume = less work the turbo has to do to fill these areas, creates less lag, and less boost drop over the system.

[CHADbee]

You are correct sir lol this motor was built over a year ago and has just been sitting. I was very happy to see it started so easily.

For a person like me who is very concerned about spool the Full Race vertical core FMIC system is great. Hopefully the combonation of that set-up, twin scroll manifold and a billet wheel custom 33R turbo will give me the power band I am after. The last thing I want is a curve like the black neon lol

[jmotley]

badass.

[CHADbee]

badass.

Hahha, thanks! Hopefully it will be badass in a couple months once a high boost tune is completed :)

[slostang]

Like

[EmminoDaGreat]

months????? fucking tune that shit, pussy.

[CHADbee]

months????? fucking tune that shit, pussy.

Hahaha! I wish it wa that easy. We are very busy and I get no special treatment, I have to get in line like everybody else. I am scheduled for my "WG pressure, break-in, drive it for a few weeks to make sure everything is good" tune on the 27th. After that I will order my new turbo and injectors.

[EmminoDaGreat]

omg. you disappoint me, tune it like you plan on beating it! hard! fuck that break in shittttttttttttttttttt

Ill make you throw it on there faster when I drag you down the highway in the accord, notice i said highway and not dig.

[CHADbee]

omg. you disappoint me, tune it like you plan on beating it! hard! fuck that break in shittttttttttttttttttt

Ill make you throw it on there faster when I drag you down the highway in the accord, notice i said highway and not dig.
Bwahhaa! Because the motor was built and then sat for a year I want to make sure there is no leaks or any other minor issues. Plus I dont want to do a high boost tune on pump gas and the 4088R.

[EmminoDaGreat]

Bwahhaa! Because the motor was built and then sat for a year I want to make sure there is no leaks or any other minor issues. Plus I dont want to do a high boost tune on pump gas and the 4088R.

Like I said, as soon as ur done lmk, i'll break you off some then youll be all the way turnttttttttttttttttttt upppppppppppppp

[NAIZBST]

gonna be a good build and project

[CHADbee]

gonna be a good build and project

Yep! I will be happy once it is up and running for sure.

[CHADbee]

Getting ready for the break in tune next week....

http://i897.photobucket.com/albums/ac177/sbaset/EVO/DSC_9217.jpg

Gotta love that Full Race vertical core intercooler

[Genji-Sama]

This car is growing on me, i've never really been a fan of this gen of Evo, but that manifold really helps :goodjob:

[SHHHH]

Engine bay looks clean. Nice little EVO build :goodjob:

[CHADbee]

Thanks guys :)

[Relentless]

Looking gud sir. Moar now!

[DA9_Vito]

This is one of my fav cars a buddy in forsyth has one but he wont come off it and I don't blame him

the red one? meaning the one that runs the dojo? if so that bitch is nasty fast.

[datboy]

shit looks slow!!!