PDA

View Full Version : Jdm B20 Block,Crank,Eagle rods,12.5:1 84mm Cp Pistons,Kms Block Guard,Kms Girdle.ETC


southside
05-26-2011, 02:34 AM
First Off Just had some stuff so decided to post,Going back to school and doubt I will be using any of this soon.So posted to see what I could get please prices are nego.But dont waste my time all parts new except block and crank.But is still OEM and JDM as FUCK Lol. Will not consider any trades unless its a GSR Long BLOCK complete!

If you plan on purchasing parts,I will meet you but I am not driving far.Because its a incovience to me and not you unless you pay me for my time and GAS!Truck takes Premium!

First I have Eagle Rods has Arp Rod Bolts also ls/b20 SOLD SOLD SOLD brand new still have Includes lube.:boobies:
http://i209.photobucket.com/albums/bb148/corey20072007/014.jpg




Second I have b20 block with crank has clean cylinder walls Hone and Slap together crank has no Damage.SOLD SOLD SOLD!!!
http://i209.photobucket.com/albums/bb148/corey20072007/b20b.jpg
http://i209.photobucket.com/albums/bb148/corey20072007/IMGP1339.jpg
http://i209.photobucket.com/albums/bb148/corey20072007/lscrank.jpg



Third I have 12.5:1 compression 84mm CP pistons shelf pistons has piston rings and wrist pins with everything needed.SOLD! SOLD! SOLD!
http://i209.photobucket.com/albums/bb148/corey20072007/pistons004.jpg
http://i209.photobucket.com/albums/bb148/corey20072007/pistons008.jpg


Fourth Kms Block Guard Brand new 84mm also SOLD SOLD SOLD!
http://i209.photobucket.com/albums/bb148/corey20072007/b16-block-guards.jpg


Fifth last but not least I have kms girdle BNIB comes with dowel pins direct bolt on. 140$ obo
http://i209.photobucket.com/albums/bb148/corey20072007/kmsgirdle002wl3.jpg



Also Have a Da Camber kit Ebay kit ill take 60$ obo
http://i209.photobucket.com/albums/bb148/corey20072007/PP-CMB-EF-RD-F.gif
JGilbert312
05-26-2011, 09:15 AM
Would you take $1,100 for all the engine stuff?
snorlax
05-26-2011, 11:19 AM
i might get that camber kit
Jazze Ek
05-26-2011, 11:35 AM
yo i have a gsr bottom end with a b16 head if you want to talk hit me up at 770-354-0882 jazze
southside
05-26-2011, 08:34 PM
Would you take $1,100 for all the engine stuff?Naw couldnt do that I could do 1250$



yo i have a gsr bottom end with a b16 head if you want to talk hit me up at 770-354-0882 jazzeTextd!


i might get that camber kitJust lmk
southside
05-30-2011, 08:30 AM
ttt
nocar96
05-31-2011, 06:58 AM
Baller!
Jdm94Coupe
05-31-2011, 07:37 AM
nice parts
southside
05-31-2011, 01:06 PM
Baller!Sorry man was just trying to get like you :boobies:
Trey
06-02-2011, 08:17 AM
Damn I would have traded my ITR short block for that short block plus cash. Too bad the piston are gone.
southside
06-02-2011, 01:32 PM
Damn I would have traded my ITR short block for that short block plus cash. Too bad the piston are gone.
Oh well gone is gone,Trying to get a G35 anyways got tired of Hondas.
Trey
06-02-2011, 02:20 PM
Does the block have the oil pan, oil pickup, windage tray? What about the crank fluctuation sensor? What all is missing from the block?

Thanks!
southside
06-02-2011, 07:54 PM
I have ls oil pan, pick up and windage tray needs oil pump.
94_teg_ls
06-02-2011, 09:15 PM
willing to part with the crank?
southside
06-03-2011, 07:38 AM
willing to part with the crank?NO BUY BOTH and you sell block~!
southside
06-05-2011, 01:23 PM
ttt
southside
06-15-2011, 07:28 AM
Block and Rods pending until Friday.
southside
06-18-2011, 10:15 AM
TTT guy backed out!
Trey
06-20-2011, 11:31 AM
Block and crank $200?
southside
06-20-2011, 05:02 PM
Block and crank $200?Pm sent hit me up.
ek forever
06-20-2011, 07:57 PM
Looks like an outstanding deal. I'm saving up for my h2b swap right now and if I had the money for yours it would be hard to resist. Your engine + ITR trans = sex.
southside
06-21-2011, 12:09 AM
Looks like an outstanding deal. I'm saving up for my h2b swap right now and if I had the money for yours it would be hard to resist. Your engine + ITR trans = sex.Yea this would be second one lol,First one had 13:1 and gsr head with mild port and pro 1s made 203 to the wheels and 146 ft lbs.Beat h2b teg and Was at back bumper of one of atls fastest h2bs he has claimed victims on the site lol didnt think it would happen but it did and he was impressed 8) So I still love bseries plus it was in a Eg hatch.But not into Bseries or going fast right now.K iz da way! Wish head was polished on first build but was a daily nothing big.
southside
06-22-2011, 09:45 AM
ttt
VtecFlow
06-22-2011, 09:47 AM
Cp pistons still for sale??
southside
06-22-2011, 01:29 PM
Cp pistons still for sale??Guess you cant read...SOLD!
southside
06-28-2011, 05:16 PM
TTT
southside
06-29-2011, 04:30 PM
ttt
southside
06-30-2011, 03:29 PM
ttt
boosted_
07-01-2011, 12:20 AM
hey txt me about the rods block and the girdle 423 715 1706
southside
07-01-2011, 11:36 AM
Text sent.
southside
07-08-2011, 09:52 AM
ttt
southside
07-10-2011, 05:43 PM
ttt
southside
07-12-2011, 12:30 PM
ttt
southside
07-14-2011, 07:12 PM
tt
southside
07-19-2011, 11:10 AM
ttt
rollingdtime
07-19-2011, 11:55 AM
Bump for DA parts hard to find
southside
07-20-2011, 09:53 AM
TTT
southside
07-24-2011, 09:50 AM
TTT
JF868849
07-25-2011, 08:53 AM
Text me ill get the rods 478-461-7392
southside
07-25-2011, 11:07 AM
Text me ill get the rods 478-461-7392

Txt sent.
southside
07-31-2011, 08:36 AM
ttt
southside
08-03-2011, 06:09 PM
ttt
southside
08-05-2011, 06:50 AM
ttt
southside
08-10-2011, 01:01 PM
ttt
southside
08-13-2011, 09:23 AM
ttt
southside
08-16-2011, 12:21 PM
ttt
southside
08-21-2011, 11:27 AM
ttt
southside
08-27-2011, 08:26 AM
ttt price reduced.
southside
09-01-2011, 10:02 AM
ttt
southside
09-01-2011, 12:40 PM
Block guard sold!!!
k_killaGSR
09-01-2011, 02:19 PM
bump for quality parts
southside
09-02-2011, 04:06 PM
Repped
southside
09-04-2011, 07:02 AM
TTT
southside
09-22-2011, 01:09 PM
TTT